1788-CNC - In Stock | Allen Bradley PLC 1788 Linking Devices

1788-CNC

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1788-CNC

Revisions: Ser A 
Description: The Allen-Bradley 1788-CNC ControlNet Daughtercard has a 5V dc @ 450 mA max. Power Requirement and a 2.25 W Power Consumption. The 1788-CNC has a 2.25 W Power Dissipation and a 30g Operating Shock.
In Stock Ships Today
Request a quote for 1788-CNC

Description:

The Allen-Bradley 1788-CNC ControlNet Daughtercard has a 5V dc @ 450 mA max. Power Requirement and a 2.25 W Power Consumption. The 1788-CNC has a 2.25 W Power Dissipation and a 30g Operating Shock.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1788-CNC.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

    Technical Specifications for 1788-CNC

Part Number1788-CNC
Product TypeControlNet Daughtercard
Power Requirement5V dc @ 450 mA max.
Power Consumption2.25 W
Power Dissipation2.25 W
Operating Shock30g
Vibration5g
Communication Port Wiring Category2
Weight0.1 Kg
Part Number1788-CNC
Product TypeControlNet Daughtercard
Power Requirement5V dc @ 450 mA max.
Power Consumption2.25 W
Power Dissipation2.25 W
Operating Shock30g
Vibration5g
Communication Port Wiring Category2
Weight0.1 Kg
s

About 1788-CNC

The Allen-Bradley 1788-CNC ControlNet daughter card is a ControlNet communication card in the Allen-Bradley Logix 5000 Control systems that is used for linking FlexLogix controllers, PowerFlex 700S controllers, and DriveLogix controllers to devices connected on the ControlNet network for easy monitoring and for the control of remotely located I/O modules on the ControlNet network. The 1788-CNC daughter card is a versatile communication card that supports I/O bridge functionality, the transfer of data via tags, communication with other ControlNet nodes, communication through NAP (Network Access Port), the use of 200-micron cables for connection to a network, and a redundant media module.



The 1788-CNC daughter card has a 5 Volts DC voltage requirement at 450 milliAmps, and a maximum power consumption rating of 2.25 Watts. It has an open type of enclosure and a maximum heat dissipation of 2.25 Watts (7.68 BTU per hour). The 1788-CNC daughter card can be installed easily while the host device is powered down, and it connects to a ControlNet network via a 200-micron cable with V-pin connectors. This communication card comes with status indicators (the I/O status indicator, Module status indicator, and the Network channel status indicators) that provides operational information about the card and network performance when connected. The 1788-CNC daughter card has an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), and it can be stored anywhere with a temperature range of  -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) range. It is designed for use with a humidity level of 5 to 95%, non-condensing, and it can withstand up to 30 G of operational shock. The 1788-CNC daughter card is c-UR-us, CSA, CE, and C-TICK certified, and it weighs approximately 0.1 kilogram.



Repair Services for 1788-CNC

Type Lead Time Price Action
Repair Service 2-4 weeks $696cartAdd to Cart

Our highly skilled technicians can repair your 1788-CNC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1788-CNC

Please refer to the manual for more information about the 1788-CNC such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1788-CNC Ser A
1788-CNC/A, Series A, Rev A Request Quote
Common misspellings:
  • l788-CNC
  • 17b8-CNC
  • 178b-CNC
  • 1788CNC

Dimensions For 1788-CNC

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1788-CNC

Resolutions For 1788-CNC

About

Technical Specifications for 1788-CNC

Part Number1788-CNC
Product TypeControlNet Daughtercard
Power Requirement5V dc @ 450 mA max.
Power Consumption2.25 W
Power Dissipation2.25 W
Operating Shock30g
Vibration5g
Communication Port Wiring Category2
Weight0.1 Kg
Part Number1788-CNC
Product TypeControlNet Daughtercard
Power Requirement5V dc @ 450 mA max.
Power Consumption2.25 W
Power Dissipation2.25 W
Operating Shock30g
Vibration5g
Communication Port Wiring Category2
Weight0.1 Kg

About 1788-CNC

The Allen-Bradley 1788-CNC ControlNet daughter card is a ControlNet communication card in the Allen-Bradley Logix 5000 Control systems that is used for linking FlexLogix controllers, PowerFlex 700S controllers, and DriveLogix controllers to devices connected on the ControlNet network for easy monitoring and for the control of remotely located I/O modules on the ControlNet network. The 1788-CNC daughter card is a versatile communication card that supports I/O bridge functionality, the transfer of data via tags, communication with other ControlNet nodes, communication through NAP (Network Access Port), the use of 200-micron cables for connection to a network, and a redundant media module.



The 1788-CNC daughter card has a 5 Volts DC voltage requirement at 450 milliAmps, and a maximum power consumption rating of 2.25 Watts. It has an open type of enclosure and a maximum heat dissipation of 2.25 Watts (7.68 BTU per hour). The 1788-CNC daughter card can be installed easily while the host device is powered down, and it connects to a ControlNet network via a 200-micron cable with V-pin connectors. This communication card comes with status indicators (the I/O status indicator, Module status indicator, and the Network channel status indicators) that provides operational information about the card and network performance when connected. The 1788-CNC daughter card has an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), and it can be stored anywhere with a temperature range of  -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) range. It is designed for use with a humidity level of 5 to 95%, non-condensing, and it can withstand up to 30 G of operational shock. The 1788-CNC daughter card is c-UR-us, CSA, CE, and C-TICK certified, and it weighs approximately 0.1 kilogram.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $696cartAdd to Cart

Our highly skilled technicians can repair your 1788-CNC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $696cartAdd to Cart

Our highly skilled technicians can repair your 1788-CNC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1788-CNC such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1788-CNC Ser A
1788-CNC/A, Series A, Rev A Request Quote

Common misspellings:
  • l788-CNC
  • 17b8-CNC
  • 178b-CNC
  • 1788CNC
PDF