1788-DNBO - In Stock | Allen Bradley PLC 1788 Linking Devices

1788-DNBO

Rated 4.6 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1788-DNBO

Revisions: Ser A 
Description: The Allen-Bradley 1788-DNBO is a DeviceNet daughtercard.
In Stock Ships Today
Request a quote for 1788-DNBO

Description: The Allen-Bradley 1788-DNBO is a DeviceNet daughtercard.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1788-DNBO.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 8 reviews

    Technical Specifications for 1788-DNBO

Product TypeDeviceNet Daughtercard
Non-Operating Temperature:IEC 60068-2-1 (Test Ab, Un-packaged Nonoperating Cold), IEC 60068-2-2 (Test Bc, Un-packaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Un- packaged Nonoperating Thermal Shock): –40...85 o C (– 40...185 o F)
Operating Temperature:EC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0...60 o C (32...140 o F)
Conductors Wire Size:24-12 AWG (0.205-3.31 mm2 ) stranded copper(2) 3/64 inch (1.2mm) insulation maximum
RTB Screw Torque:5-7 inch-pounds (0.56-0.8 Nm)
Power Consumption, max:5 V dc, 1.3W 24V dc, 0.48W. Total=1.78W
Power Requirements:5V dc @ 260mA (Host); 24V dc @ 20mA Class 2 (DeviceNet)
Supported Transmission rate:125Kb, 250Kb and 500 Kb
Product Family:DeviceNet
Brand:Allen-Bradley
Manufacturer:Rockwell Automation
Isolation VoltageTested to withstand 707 V dc for 60 seconds
Part Number1788-DNBO
Host Power Requirement5V dc @ 260mA
DeviceNet Power Requirement24V dc @ 20mA
Power Consumption5V DC
Thermal Dissipation6.1 BTU/hr
EnclosureNone
Operating Shock30g
Weight0.1 kg
UPC10662468217887
Product TypeDeviceNet Daughtercard
Non-Operating Temperature:IEC 60068-2-1 (Test Ab, Un-packaged Nonoperating Cold), IEC 60068-2-2 (Test Bc, Un-packaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Un- packaged Nonoperating Thermal Shock): –40...85 o C (– 40...185 o F)
Operating Temperature:EC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0...60 o C (32...140 o F)
Conductors Wire Size:24-12 AWG (0.205-3.31 mm2 ) stranded copper(2) 3/64 inch (1.2mm) insulation maximum
RTB Screw Torque:5-7 inch-pounds (0.56-0.8 Nm)
Power Consumption, max:5 V dc, 1.3W 24V dc, 0.48W. Total=1.78W
Power Requirements:5V dc @ 260mA (Host); 24V dc @ 20mA Class 2 (DeviceNet)
Supported Transmission rate:125Kb, 250Kb and 500 Kb
Product Family:DeviceNet
Brand:Allen-Bradley
Manufacturer:Rockwell Automation
Isolation VoltageTested to withstand 707 V dc for 60 seconds
Part Number1788-DNBO
Host Power Requirement5V dc @ 260mA
DeviceNet Power Requirement24V dc @ 20mA
Power Consumption5V DC
Thermal Dissipation6.1 BTU/hr
EnclosureNone
Operating Shock30g
Weight0.1 kg
UPC10662468217887
s

About 1788-DNBO

The Allen-Bradley 1786-DNBO is a DeviceNet Daughtercard. This daughtercard is used with any compatible Allen-Bradley device that accommodates this module.

For configuration of the DeviceNet daughtercard, RSNetWorx for DeviceNet V3.0 Service Pack 2 is required. This is required to include the module to the system scanlist.

To set the network address of the 1788-DNBO, Two (2) switches are provided with the 1788-DNBO. Valid node address is 0-63 which is the node range supported by DeviceNet networks. As a general rule, the node address of the daughtercard must be unique and shall have no duplicate address in the network. Additionally, setting the node address to 99 and restarting the module, erases the daghtercard to the defined scanlist therefore, this shall only be done is erasure to scanlist is needed. The switch settings are read during powerup to identify the set address and the intended operation for the daughtercard.

The network transmission rate may be configured using a different hardware switch, installed also in the daughtercard. This switch is located beside the Removable connectors and allows setting of speeds such as 125 Kb if set at Zero (0), 250Kb if set at One (1) and 500 Kb if set at Two (2). Similarly, the switch settings are read during module startup.

This daughter card is provided with status indicators such as Network Status (NS) and I/O status indicators. The Network status indicator is a bi-color LED that generally display the status of the communication link. The I/O status indicator as well is a bi-color LED that indicates the I/O scanning speed.

The 1788-DNBO daughter card offers selectable baud rates and nodes (0 = 125k, 1 = 250k, 2 = 500k), which can be set via the hardware push-wheels on the board, and it has input and output data rates of 124 Double Integers (DINT) and 123 DINTs. The 1788-DNBO daughter card connects to the DeviceNet network via a factory provided 5-pin DeviceNet connector cable which is connected to the DeviceNet port on the scanner and screwed tightly with connector screws. It has Network status (NW), module status (MS), and I/O status indicators, which indicate the card’s performance status. The 1788-DNBO daughter card has an operating temperature range of 0 to 60 degrees Celsius, and it can be stored within a –40 to 85 degrees Celsius temperature range. It has a net shipping weight of 0.1 kilograms, and it is CE, c-UR-us, C-TICK, and ODVA certified.

FAQ for 1788-DNBO

What is the supported transmission speed by this daughtercard?


The supported transmission rate of this daughtercard are 125Kb, 250Kb and 500Kb.

Can I use this daughtercard with FlexLogix and ControlLogix?


Yes, this Daughtercard supports FlexLogix, ControlLogix, Point I/O, other Logix based devices.

What is the conductors wire size recommended for use with the 1788-DNBO?


Recommended wire size range is 24-12 AWG (0.205-3.31 mm2) stranded copper with 3/64 inch (1.2mm) maximum insulation.

Technical Description of 1788-DNBO

The Allen-Bradley 1788-DNBO DeviceNet Daughtercard has a 5V dc @ 260mA Host Power Requirement and a 24V dc @ 20mA DeviceNet Power Requirement. The 1788-DNBO has a 5V DC Power Consumption and a 6.1 BTU/hr Thermal Dissipation.

Repair Services for 1788-DNBO

Type Lead Time Price Action
Repair Service 2-4 weeks $276cartAdd to Cart

Our highly skilled technicians can repair your 1788-DNBO. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1788-DNBO

Please refer to the manual for more information about the 1788-DNBO such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1788-DNBO Ser A
1788-DNBO/A, Series A, Rev A Request Quote
Common misspellings:
  • l788-DNBO
  • 17b8-DNBO
  • 178b-DNBO
  • 1788-DN8O
  • 1788-DNB0
  • 1788DNBO

Reviews for 1788-DNBO

Product Review

"The 1788-DNBO is a DeviceNet daughtercard. This module is installed to any compatible device supporting this daughtercard. Some of the supported platforms by this daughtercard are Logix controllers and Point I/O system. " -DO Supply Tech

Dimensions For 1788-DNBO

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1788-DNBO

Resolutions For 1788-DNBO

About

Technical Specifications for 1788-DNBO

Product TypeDeviceNet Daughtercard
Non-Operating Temperature:IEC 60068-2-1 (Test Ab, Un-packaged Nonoperating Cold), IEC 60068-2-2 (Test Bc, Un-packaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Un- packaged Nonoperating Thermal Shock): –40...85 o C (– 40...185 o F)
Operating Temperature:EC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0...60 o C (32...140 o F)
Conductors Wire Size:24-12 AWG (0.205-3.31 mm2 ) stranded copper(2) 3/64 inch (1.2mm) insulation maximum
RTB Screw Torque:5-7 inch-pounds (0.56-0.8 Nm)
Power Consumption, max:5 V dc, 1.3W 24V dc, 0.48W. Total=1.78W
Power Requirements:5V dc @ 260mA (Host); 24V dc @ 20mA Class 2 (DeviceNet)
Supported Transmission rate:125Kb, 250Kb and 500 Kb
Product Family:DeviceNet
Brand:Allen-Bradley
Manufacturer:Rockwell Automation
Isolation VoltageTested to withstand 707 V dc for 60 seconds
Part Number1788-DNBO
Host Power Requirement5V dc @ 260mA
DeviceNet Power Requirement24V dc @ 20mA
Power Consumption5V DC
Thermal Dissipation6.1 BTU/hr
EnclosureNone
Operating Shock30g
Weight0.1 kg
UPC10662468217887
Product TypeDeviceNet Daughtercard
Non-Operating Temperature:IEC 60068-2-1 (Test Ab, Un-packaged Nonoperating Cold), IEC 60068-2-2 (Test Bc, Un-packaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Un- packaged Nonoperating Thermal Shock): –40...85 o C (– 40...185 o F)
Operating Temperature:EC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal Shock): 0...60 o C (32...140 o F)
Conductors Wire Size:24-12 AWG (0.205-3.31 mm2 ) stranded copper(2) 3/64 inch (1.2mm) insulation maximum
RTB Screw Torque:5-7 inch-pounds (0.56-0.8 Nm)
Power Consumption, max:5 V dc, 1.3W 24V dc, 0.48W. Total=1.78W
Power Requirements:5V dc @ 260mA (Host); 24V dc @ 20mA Class 2 (DeviceNet)
Supported Transmission rate:125Kb, 250Kb and 500 Kb
Product Family:DeviceNet
Brand:Allen-Bradley
Manufacturer:Rockwell Automation
Isolation VoltageTested to withstand 707 V dc for 60 seconds
Part Number1788-DNBO
Host Power Requirement5V dc @ 260mA
DeviceNet Power Requirement24V dc @ 20mA
Power Consumption5V DC
Thermal Dissipation6.1 BTU/hr
EnclosureNone
Operating Shock30g
Weight0.1 kg
UPC10662468217887

About 1788-DNBO

The Allen-Bradley 1786-DNBO is a DeviceNet Daughtercard. This daughtercard is used with any compatible Allen-Bradley device that accommodates this module.

For configuration of the DeviceNet daughtercard, RSNetWorx for DeviceNet V3.0 Service Pack 2 is required. This is required to include the module to the system scanlist.

To set the network address of the 1788-DNBO, Two (2) switches are provided with the 1788-DNBO. Valid node address is 0-63 which is the node range supported by DeviceNet networks. As a general rule, the node address of the daughtercard must be unique and shall have no duplicate address in the network. Additionally, setting the node address to 99 and restarting the module, erases the daghtercard to the defined scanlist therefore, this shall only be done is erasure to scanlist is needed. The switch settings are read during powerup to identify the set address and the intended operation for the daughtercard.

The network transmission rate may be configured using a different hardware switch, installed also in the daughtercard. This switch is located beside the Removable connectors and allows setting of speeds such as 125 Kb if set at Zero (0), 250Kb if set at One (1) and 500 Kb if set at Two (2). Similarly, the switch settings are read during module startup.

This daughter card is provided with status indicators such as Network Status (NS) and I/O status indicators. The Network status indicator is a bi-color LED that generally display the status of the communication link. The I/O status indicator as well is a bi-color LED that indicates the I/O scanning speed.

The 1788-DNBO daughter card offers selectable baud rates and nodes (0 = 125k, 1 = 250k, 2 = 500k), which can be set via the hardware push-wheels on the board, and it has input and output data rates of 124 Double Integers (DINT) and 123 DINTs. The 1788-DNBO daughter card connects to the DeviceNet network via a factory provided 5-pin DeviceNet connector cable which is connected to the DeviceNet port on the scanner and screwed tightly with connector screws. It has Network status (NW), module status (MS), and I/O status indicators, which indicate the card’s performance status. The 1788-DNBO daughter card has an operating temperature range of 0 to 60 degrees Celsius, and it can be stored within a –40 to 85 degrees Celsius temperature range. It has a net shipping weight of 0.1 kilograms, and it is CE, c-UR-us, C-TICK, and ODVA certified.

FAQ for 1788-DNBO

What is the supported transmission speed by this daughtercard?


The supported transmission rate of this daughtercard are 125Kb, 250Kb and 500Kb.

Can I use this daughtercard with FlexLogix and ControlLogix?


Yes, this Daughtercard supports FlexLogix, ControlLogix, Point I/O, other Logix based devices.

What is the conductors wire size recommended for use with the 1788-DNBO?


Recommended wire size range is 24-12 AWG (0.205-3.31 mm2) stranded copper with 3/64 inch (1.2mm) maximum insulation.

Technical Description of 1788-DNBO

The Allen-Bradley 1788-DNBO DeviceNet Daughtercard has a 5V dc @ 260mA Host Power Requirement and a 24V dc @ 20mA DeviceNet Power Requirement. The 1788-DNBO has a 5V DC Power Consumption and a 6.1 BTU/hr Thermal Dissipation.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $276cartAdd to Cart

Our highly skilled technicians can repair your 1788-DNBO. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $276cartAdd to Cart

Our highly skilled technicians can repair your 1788-DNBO. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1788-DNBO such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1788-DNBO Ser A
1788-DNBO/A, Series A, Rev A Request Quote

Common misspellings:
  • l788-DNBO
  • 17b8-DNBO
  • 178b-DNBO
  • 1788-DN8O
  • 1788-DNB0
  • 1788DNBO
PDF
Reviews

Reviews for 1788-DNBO

Product Review

"The 1788-DNBO is a DeviceNet daughtercard. This module is installed to any compatible device supporting this daughtercard. Some of the supported platforms by this daughtercard are Logix controllers and Point I/O system. " -DO Supply Tech