1788-EN2PAR | Allen Bradley PLC 1788 Linking Devices

1788-EN2PAR

1788-EN2PAR

Revisions: Ser A Ser B 
Description: The 1788-EN2PAR Ethernet/IP linking device is a Bulletin 1788 linking device from Allen-Bradley/Rockwell Automation. It can be used to connect Profibus PA devices to the Ethernet/IP industrial network. The 1788-EN2PAR Ethernet/IP linking device can connect the Profibus PA devices directly to the Ethernet/IP network without requiring an intermediate Profibus DP or decentralized peripherals layer. This linking device should not be used with power conditioners or with extra power supplies. The 1788-EN2PAR Ethernet/IP linking device connects to the Ethernet network through an RJ45 connector and it uses hardware switches or BOOTP servers to set its IP address.
Rated 4.7 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 1788-EN2PAR

Add more parts to quote

Description: The 1788-EN2PAR Ethernet/IP linking device is a Bulletin 1788 linking device from Allen-Bradley/Rockwell Automation. It can be used to connect Profibus PA devices to the Ethernet/IP industrial network. The 1788-EN2PAR Ethernet/IP linking device can connect the Profibus PA devices directly to the Ethernet/IP network without requiring an intermediate Profibus DP or decentralized peripherals layer. This linking device should not be used with power conditioners or with extra power supplies. The 1788-EN2PAR Ethernet/IP linking device connects to the Ethernet network through an RJ45 connector and it uses hardware switches or BOOTP servers to set its IP address.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1788-EN2PAR.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 19 reviews

    Technical Specifications for 1788-EN2PAR

Part Number1788-EN2PAR
Product TypeLinking Device to Profibus PA Networks
Input Power24-32V DC
PA Power0.5 A @ 24V DC
EnclosureOpen
Operating Shock15G
Isolation Voltage30V
Power Consumption260 mA @ 24V DC
Power Dissipation12.4 W @ 24V DC
Ethernet ConductorsCAT5 STP/UTP
Part Number1788-EN2PAR
Product TypeLinking Device to Profibus PA Networks
Input Power24-32V DC
PA Power0.5 A @ 24V DC
EnclosureOpen
Operating Shock15G
Isolation Voltage30V
Power Consumption260 mA @ 24V DC
Power Dissipation12.4 W @ 24V DC
Ethernet ConductorsCAT5 STP/UTP
s

About 1788-EN2PAR

The 1788-EN2PAR linking device from Allen-Bradley is an Ethernet to ProfiBus PA (Process Automation) linking device. It provides an integrated and fast solution for adding ProfiBus PA devices to Logix platforms. The 1788-EN2PAR linking device should be powered by a SELV (Safety Extra Low Voltage) or PELV (Protected Extra Low Voltage) power supply in order to comply with the CE LVD (Low Voltage Directive). The power requirements of the 1788-EN2PAR linking device are an input voltage between 24 and 32 Volts DC and 0.75 Amps of current. When no field devices are attached to it, the linking device draws 260 milliwatts of power at 24 Volts DC. The total device power dissipation at 24 Volts DC is 12.24 Watts. The Ethernet ports on the device should be used with either the CAT5 shielded twisted pair cables or CAT5 unshielded twisted pair cables. For the DC power and ProfiBus PA connections, Allen-Bradley recommends a copper wire size of 24 to 18 AWG (solid or stranded). The copper wire should be rated for 180 degrees Fahrenheit or a higher temperature.



The Allen-Bradley 1788-EN2PAR linking device is an open device and it is compliant with the T4 North American and the IEC temperature codes. Detailed diagnostics for the device can be viewed from its device type application manager screen with the FDT Thin Frame from the Studio 5000 series. To prevent damage to the ESD-sensitive device parts, Allen-Bradley recommends following several static control guidelines, including the use of grounding wrist straps and the use of static-safe packaging for the transport of the device and its components.

Technical Description of 1788-EN2PAR

The Allen-Bradley 1788-EN2PAR Linking Device to Profibus PA Networks has a 24-32V DC Input Power and a 0.5 A @ 24V Dc PA Power. The 1788-EN2PAR has an Open Enclosure and a 15g Operating Shock.

Repair Services for 1788-EN2PAR

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1788-EN2PAR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1788-EN2PAR

Please refer to the manual for more information about the 1788-EN2PAR such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1788-EN2PAR Ser A
1788-EN2PAR/A, Series A, Rev A Request Quote
1788-EN2PAR Ser B
1788-EN2PAR/B, Series B, Rev B Request Quote
Common misspellings:
  • l788-EN2PAR
  • 17b8-EN2PAR
  • 178b-EN2PAR
  • 1788EN2PAR

Dimensions For 1788-EN2PAR

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1788-EN2PAR

Resolutions For 1788-EN2PAR

About

Technical Specifications for 1788-EN2PAR

Part Number1788-EN2PAR
Product TypeLinking Device to Profibus PA Networks
Input Power24-32V DC
PA Power0.5 A @ 24V DC
EnclosureOpen
Operating Shock15G
Isolation Voltage30V
Power Consumption260 mA @ 24V DC
Power Dissipation12.4 W @ 24V DC
Ethernet ConductorsCAT5 STP/UTP
Part Number1788-EN2PAR
Product TypeLinking Device to Profibus PA Networks
Input Power24-32V DC
PA Power0.5 A @ 24V DC
EnclosureOpen
Operating Shock15G
Isolation Voltage30V
Power Consumption260 mA @ 24V DC
Power Dissipation12.4 W @ 24V DC
Ethernet ConductorsCAT5 STP/UTP

About 1788-EN2PAR

The 1788-EN2PAR linking device from Allen-Bradley is an Ethernet to ProfiBus PA (Process Automation) linking device. It provides an integrated and fast solution for adding ProfiBus PA devices to Logix platforms. The 1788-EN2PAR linking device should be powered by a SELV (Safety Extra Low Voltage) or PELV (Protected Extra Low Voltage) power supply in order to comply with the CE LVD (Low Voltage Directive). The power requirements of the 1788-EN2PAR linking device are an input voltage between 24 and 32 Volts DC and 0.75 Amps of current. When no field devices are attached to it, the linking device draws 260 milliwatts of power at 24 Volts DC. The total device power dissipation at 24 Volts DC is 12.24 Watts. The Ethernet ports on the device should be used with either the CAT5 shielded twisted pair cables or CAT5 unshielded twisted pair cables. For the DC power and ProfiBus PA connections, Allen-Bradley recommends a copper wire size of 24 to 18 AWG (solid or stranded). The copper wire should be rated for 180 degrees Fahrenheit or a higher temperature.



The Allen-Bradley 1788-EN2PAR linking device is an open device and it is compliant with the T4 North American and the IEC temperature codes. Detailed diagnostics for the device can be viewed from its device type application manager screen with the FDT Thin Frame from the Studio 5000 series. To prevent damage to the ESD-sensitive device parts, Allen-Bradley recommends following several static control guidelines, including the use of grounding wrist straps and the use of static-safe packaging for the transport of the device and its components.

Technical Description of 1788-EN2PAR

The Allen-Bradley 1788-EN2PAR Linking Device to Profibus PA Networks has a 24-32V DC Input Power and a 0.5 A @ 24V Dc PA Power. The 1788-EN2PAR has an Open Enclosure and a 15g Operating Shock.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1788-EN2PAR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1788-EN2PAR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1788-EN2PAR such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1788-EN2PAR Ser A
1788-EN2PAR/A, Series A, Rev A Request Quote
1788-EN2PAR Ser B
1788-EN2PAR/B, Series B, Rev B Request Quote

Common misspellings:
  • l788-EN2PAR
  • 17b8-EN2PAR
  • 178b-EN2PAR
  • 1788EN2PAR
PDF