DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2750-C1 cable is a coaxial cable from the 2750 Intelligent Antennas series. The length of the cable is 10 feet. The minimum bend radius of the 2750-C1 cable is 2 inches.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2750-C1. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2750 Intelligent Antennas |
Part Number | 2750-C1 |
Product Type | Coaxial Cable |
Length | 10 Feet |
Minimum Bend Radius | 2 inches |
Color Coded | Yes |
Operating Temperature | 0 to 60 degrees Celsius |
Storage Temperature | -40 to 85 degrees Celsius |
Torque | 7 to 10 Pounds on an Inch |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2750 Intelligent Antennas |
Part Number | 2750-C1 |
Product Type | Coaxial Cable |
Length | 10 Feet |
Minimum Bend Radius | 2 inches |
Color Coded | Yes |
Operating Temperature | 0 to 60 degrees Celsius |
Storage Temperature | -40 to 85 degrees Celsius |
Torque | 7 to 10 Pounds on an Inch |
The Allen-Bradley 2750-C1 cable is a coaxial cable. It has a length of 10 feet. The 2750-C1 cable is designed for connecting the Bulletin 2750 smart RFID antennas (catalog numbers 2750-ASPRF, 2750-ASPR, and 2750-ASP) to remote antenna heads (catalog number 2750-H1). The minimum bend radius of the cable is 2 inches or 51 millimeters. The cables should be routed so that there is no tension on the cable connectors. The 2750-C1 cable pairs are color-coded and color bands at each cable end are either marked red or blue. Allen-Bradley recommends that when more than one antenna is being used, one color cable should be used for the TX line and the other color cable should be used for the RX lines throughout the RFID system.
The TX interface on the antenna should be connected to the TX interface of the remote head by using a 2750-C1 cable. Similarly, the RX interface on the antenna should be connected to the RX interface of the remote head by using a 2750-C1 cable. The recommended torque to be used while mating the connectors is 7 to 10 pounds on an inch. For an RFID system consisting of smart antennas, remote antenna heads, and interconnecting coaxial cables, the recommended ambient temperature ranges from 0 degrees Celsius to 60 degrees Celsius. When the 2750-C1 cable is kept in storage or is being transported, the minimum ambient temperature should be -40 degrees Celsius and the maximum ambient temperature should be 85 degrees Celsius. The installation and operation of the RFID system should be performed in line with the manufacturer’s recommendations.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2750-C1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2750 Intelligent Antennas |
Part Number | 2750-C1 |
Product Type | Coaxial Cable |
Length | 10 Feet |
Minimum Bend Radius | 2 inches |
Color Coded | Yes |
Operating Temperature | 0 to 60 degrees Celsius |
Storage Temperature | -40 to 85 degrees Celsius |
Torque | 7 to 10 Pounds on an Inch |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2750 Intelligent Antennas |
Part Number | 2750-C1 |
Product Type | Coaxial Cable |
Length | 10 Feet |
Minimum Bend Radius | 2 inches |
Color Coded | Yes |
Operating Temperature | 0 to 60 degrees Celsius |
Storage Temperature | -40 to 85 degrees Celsius |
Torque | 7 to 10 Pounds on an Inch |
The Allen-Bradley 2750-C1 cable is a coaxial cable. It has a length of 10 feet. The 2750-C1 cable is designed for connecting the Bulletin 2750 smart RFID antennas (catalog numbers 2750-ASPRF, 2750-ASPR, and 2750-ASP) to remote antenna heads (catalog number 2750-H1). The minimum bend radius of the cable is 2 inches or 51 millimeters. The cables should be routed so that there is no tension on the cable connectors. The 2750-C1 cable pairs are color-coded and color bands at each cable end are either marked red or blue. Allen-Bradley recommends that when more than one antenna is being used, one color cable should be used for the TX line and the other color cable should be used for the RX lines throughout the RFID system.
The TX interface on the antenna should be connected to the TX interface of the remote head by using a 2750-C1 cable. Similarly, the RX interface on the antenna should be connected to the RX interface of the remote head by using a 2750-C1 cable. The recommended torque to be used while mating the connectors is 7 to 10 pounds on an inch. For an RFID system consisting of smart antennas, remote antenna heads, and interconnecting coaxial cables, the recommended ambient temperature ranges from 0 degrees Celsius to 60 degrees Celsius. When the 2750-C1 cable is kept in storage or is being transported, the minimum ambient temperature should be -40 degrees Celsius and the maximum ambient temperature should be 85 degrees Celsius. The installation and operation of the RFID system should be performed in line with the manufacturer’s recommendations.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2750-C1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2750-C1. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.