DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2755-DS1A. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2755 Barcode Decoders |
Part Number | 2755-DS1A |
Product Type | Barcode Decoder |
Ports | 1 |
Enclosure | NEMA Type 1 |
Input Voltage | 100 to 240 Volts AC |
Status LEDs | 14 |
AUX Port | Yes |
Host Port | Yes |
Power Consumption | 55 VA |
Weight | 4.5 Kilograms |
Dimensions | 10.25 x 12 x 4.57 Inches |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2755 Barcode Decoders |
Part Number | 2755-DS1A |
Product Type | Barcode Decoder |
Ports | 1 |
Enclosure | NEMA Type 1 |
Input Voltage | 100 to 240 Volts AC |
Status LEDs | 14 |
AUX Port | Yes |
Host Port | Yes |
Power Consumption | 55 VA |
Weight | 4.5 Kilograms |
Dimensions | 10.25 x 12 x 4.57 Inches |
The Allen-Bradley 2755-DS1A decoder is a Bulletin 2755 series enhanced barcode decoder. It is a single head decoder which has one port for connecting to a scanner. The decoder is housed in a NEMA Type 1 enclosure. An built-in power supply on the decoder provides power to the attached laser scanner and to the decoder. The source power supply voltage can range from 100 to 240 Volts AC at 50 to 60 Hertz. The power supply is designed to automatically adjust to the input voltage. Fourteen LED indicators are provided on the front panel of the 2755-DS1A decoder. An optional 2-line by 20-character alphanumeric LCD screen is available for the decoder. This screen shows the barcode data, decoder performance values, and output counter values.
An AUX port on the 2755-DS1A barcode decoder can be used to interface with an ASCII terminal through the RS-232 communication protocol. The AUX port can be used in 2 operating modes: the decoder configuration mode and manual data entry mode. A host port of the 2755-DS1A barcode decoder enables interfacing with a host computer or an Allen-Bradley programmable logic controller. An IEC 320 power-entry connector is available on the 2755-DS1A barcode decoder. The nominal power consumption of the decoder is 55 VA. With all options, the maximum installed weight of the decoder is 4.5 kilograms. The dimensions of the 2755-DS1A barcode decoder are 10.25 x 12 x 4.57 inches. The operating and storage temperature ranges for the decoder are 0 to 50 degrees Celsius and -40 to 85 degrees Celsius, respectively. The scanner port has a 25-pin female connector.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $264 | ![]() |
Our highly skilled technicians can repair your 2755-DS1A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2755 Barcode Decoders |
Part Number | 2755-DS1A |
Product Type | Barcode Decoder |
Ports | 1 |
Enclosure | NEMA Type 1 |
Input Voltage | 100 to 240 Volts AC |
Status LEDs | 14 |
AUX Port | Yes |
Host Port | Yes |
Power Consumption | 55 VA |
Weight | 4.5 Kilograms |
Dimensions | 10.25 x 12 x 4.57 Inches |
Brand | Allen-Bradley / Rockwell Automation |
Series | 2755 Barcode Decoders |
Part Number | 2755-DS1A |
Product Type | Barcode Decoder |
Ports | 1 |
Enclosure | NEMA Type 1 |
Input Voltage | 100 to 240 Volts AC |
Status LEDs | 14 |
AUX Port | Yes |
Host Port | Yes |
Power Consumption | 55 VA |
Weight | 4.5 Kilograms |
Dimensions | 10.25 x 12 x 4.57 Inches |
The Allen-Bradley 2755-DS1A decoder is a Bulletin 2755 series enhanced barcode decoder. It is a single head decoder which has one port for connecting to a scanner. The decoder is housed in a NEMA Type 1 enclosure. An built-in power supply on the decoder provides power to the attached laser scanner and to the decoder. The source power supply voltage can range from 100 to 240 Volts AC at 50 to 60 Hertz. The power supply is designed to automatically adjust to the input voltage. Fourteen LED indicators are provided on the front panel of the 2755-DS1A decoder. An optional 2-line by 20-character alphanumeric LCD screen is available for the decoder. This screen shows the barcode data, decoder performance values, and output counter values.
An AUX port on the 2755-DS1A barcode decoder can be used to interface with an ASCII terminal through the RS-232 communication protocol. The AUX port can be used in 2 operating modes: the decoder configuration mode and manual data entry mode. A host port of the 2755-DS1A barcode decoder enables interfacing with a host computer or an Allen-Bradley programmable logic controller. An IEC 320 power-entry connector is available on the 2755-DS1A barcode decoder. The nominal power consumption of the decoder is 55 VA. With all options, the maximum installed weight of the decoder is 4.5 kilograms. The dimensions of the 2755-DS1A barcode decoder are 10.25 x 12 x 4.57 inches. The operating and storage temperature ranges for the decoder are 0 to 50 degrees Celsius and -40 to 85 degrees Celsius, respectively. The scanner port has a 25-pin female connector.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $264 | ![]() |
Our highly skilled technicians can repair your 2755-DS1A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | $264 | ![]() |
Our highly skilled technicians can repair your 2755-DS1A. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.