Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley 45CPD Laser Sensors 45CPD-8LTB1-D5

Product image is representative; revision or series may vary. Contact us to request a specific version.

45CPD-8LTB1-D5

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 45CPD-8LTB1-D5 analog laser sensor is used in different applications that require object measurements and position detection. This 45CPD series laser sensor comes with a Class 1 sensing beam and a red alignment beam. It requires a power supply of 18 to 30 Volts DC and it has a current consumption of 125 milliamps.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 45CPD-8LTB1-D5

ManufacturerAllen Bradley
CategoryPLCs
Product Line45CPD Laser Sensors
Part Number45CPD-8LTB1-D5
UPC662074555727
Weight0.56 lbs (0.26 kg)
Sensing BeamClass 1 Laser, IR 905 nm
Alignment BeamVisible Red Class 1 Laser, 650 nm
Linearity40 mm (1.57 in.)
Hysteresis30 mm (1.2 in.) Fixed
Temperature Drift1.2 mm/degree Celsius
Supply Voltage18 to 30 Volts DC
Current Consumption125 mA at 24 Volts DC
Circuitry ProtectionShort Circuit, Overload, False Pulse, Transient Noise, Reverse Polarity Protection
Response TimeFast/Slow: 13 ms/30 ms
Housing MaterialPlastic, ABS
Request a Repair

The 45CPD-8LTB1-D5 sensor is an analog laser sensor that has been designed by Allen-Bradley/Rockwell Automation in the 45CPD Laser Sensors series. This part is a Class 1 infrared laser sensor that provides long-distance sensing and it can be used in multiple applications that support equipment from analog and discrete outputs. This sensor comes with special buttons that can be used to automatically install and program different operational modes. The Allen-Bradley/Rockwell Automation 45CPD-8LTB1-D5 analog laser sensor comes with an IP 67 rated enclosure that provides sufficient protection against contact with multiple residual particles from the application process. This sensor does not require any external control devices and its use is typical for applications for a relatively small sensing range of up to 6 meters.

The Allen-Bradley/Rockwell Automation 45CPD-8LTB1-D5 analog laser sensor comes with a hysteresis of 30 millimeters and a temperature drift of 1.2 millimeters per degree Celsius. The lens material is PMMA and it comes with plastic housing. This sensor does not include any accessories but these are available in the catalog. The Allen-Bradley/Rockwell Automation 45CPD-8LTB1-D5 analog laser sensor has a visible red alignment beam that consists of one laser rated at 650 nm. Some of the applications that use this laser sensor are distance measurement, verifying the material position, thickness measurement, roll diameter, inspections, and box width measurement applications. This sensor comes with 2 discrete outputs and 1 analog output and a self-contained sensor. When this sensor is mounted, it must not be at head height to ensure that it is not directed to people. It needs to be securely mounted on a firm and stable surface to guarantee safe operations and correct measurements.