DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley T9431 controller module is part of the AADvance Controllers series. It is an analog input module with 8 isolated inputs. The T9431 controller module operates with 0 to 32 Volts DC input voltage.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the T9431. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | AADvance Controllers |
Part Number | T9431 |
Product Type | Analog Input Module |
Number of Inputs | 8 |
Input Isolation | Supported |
Voltage Type | DC |
Input Voltage | 0 to 32 Volts DC |
Maximum Pollution Degree | Pollution Degree 2 |
Maximum Operating Temperature | 60 degrees Celsius |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | AADvance Controllers |
Part Number | T9431 |
Product Type | Analog Input Module |
Number of Inputs | 8 |
Input Isolation | Supported |
Voltage Type | DC |
Input Voltage | 0 to 32 Volts DC |
Maximum Pollution Degree | Pollution Degree 2 |
Maximum Operating Temperature | 60 degrees Celsius |
The T9431 controller is an Allen-Bradley/Rockwell Automation AADvance Controllers series controller module. It is an analog type of input module. The T9431 input controller module has been approved for safe operation in applications in non-hazardous industrial locations. It can be used with PLCs or programmable logic controllers. This input controller module draws its power from the AADvance systems backplane, it runs on DC voltage, and its DC backplane voltage range is between 18 and 32 Volts DC. Its maximum backplane current rating is 260 milliamps. The T9431 input controller module’s input electrical ratings are 0 to 32 Volts DC input voltage at 6.5 milliamps. It has 8 input channels in total.
The Allen-Bradley/Rockwell Automation T9431 analog input controller module from the AADvance Controllers series has a rated power consumption of 3.3 Watts. Additionally, this controller module dissipates 11.3 BTU per hour of energy as heat. It weighs 10 ounces or 280 grams. The T9431 analog input controller module is an isolated type of input module. It is an essential part of any complete AADvance system. It is best suited for smaller applications but it is designed to be flexible and easy to configure and set up. The highest pollution degree that the T9431 analog input controller module can withstand is Pollution Degree 2. The highest air temperature rating that it can operate at is 60 degrees Celsius or 140 degrees Fahrenheit. The T9431 analog input controller module can be mounted in an enclosure on a DIN Rail or on a wall.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your T9431. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | AADvance Controllers |
Part Number | T9431 |
Product Type | Analog Input Module |
Number of Inputs | 8 |
Input Isolation | Supported |
Voltage Type | DC |
Input Voltage | 0 to 32 Volts DC |
Maximum Pollution Degree | Pollution Degree 2 |
Maximum Operating Temperature | 60 degrees Celsius |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | AADvance Controllers |
Part Number | T9431 |
Product Type | Analog Input Module |
Number of Inputs | 8 |
Input Isolation | Supported |
Voltage Type | DC |
Input Voltage | 0 to 32 Volts DC |
Maximum Pollution Degree | Pollution Degree 2 |
Maximum Operating Temperature | 60 degrees Celsius |
The T9431 controller is an Allen-Bradley/Rockwell Automation AADvance Controllers series controller module. It is an analog type of input module. The T9431 input controller module has been approved for safe operation in applications in non-hazardous industrial locations. It can be used with PLCs or programmable logic controllers. This input controller module draws its power from the AADvance systems backplane, it runs on DC voltage, and its DC backplane voltage range is between 18 and 32 Volts DC. Its maximum backplane current rating is 260 milliamps. The T9431 input controller module’s input electrical ratings are 0 to 32 Volts DC input voltage at 6.5 milliamps. It has 8 input channels in total.
The Allen-Bradley/Rockwell Automation T9431 analog input controller module from the AADvance Controllers series has a rated power consumption of 3.3 Watts. Additionally, this controller module dissipates 11.3 BTU per hour of energy as heat. It weighs 10 ounces or 280 grams. The T9431 analog input controller module is an isolated type of input module. It is an essential part of any complete AADvance system. It is best suited for smaller applications but it is designed to be flexible and easy to configure and set up. The highest pollution degree that the T9431 analog input controller module can withstand is Pollution Degree 2. The highest air temperature rating that it can operate at is 60 degrees Celsius or 140 degrees Fahrenheit. The T9431 analog input controller module can be mounted in an enclosure on a DIN Rail or on a wall.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your T9431. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your T9431. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.