1738-AENTR - In Stock | Allen Bradley PLC ArmorPoint Modules

1738-AENTR

Rated 4.5 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1738-AENTR

Description: The Allen-Bradley 1738-AENTR Adapter is an ArmorPoint I/O 2-Port EtherNet/IP Series A Adapter. It supports a maximum of 63 modules, 5 rack-optimized connections, and 20 direct connections. This adapter has an enclosure type rating that meets the IP 65, 66, 67, and 69K standards (when marked).
In Stock Ships Today
Request a quote for 1738-AENTR

Description:

The Allen-Bradley 1738-AENTR Adapter is an ArmorPoint I/O 2-Port EtherNet/IP Series A Adapter. It supports a maximum of 63 modules, 5 rack-optimized connections, and 20 direct connections. This adapter has an enclosure type rating that meets the IP 65, 66, 67, and 69K standards (when marked).


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1738-AENTR.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 18 reviews

    Technical Specifications for 1738-AENTR

BrandAllen-Bradley / Rockwell Automation
SeriesArmorPoint Modules
Part Number1738-AENTR
Maximum # of Modules Supported63
# of Rack Optimized Connections5
Maximum # of Direct Connections20
Maximum Backplane Output Current0.8 Amps
Inrush Current, Maximum6 Amps for 10 Milliseconds
Input Overvoltage ProtectionReverse Polarity Protected
Maximum Power Consumption10.4 Watts at 28.8 Volts
Maximum Power Dissipation6.3 Watts at 28.8 Volts
Maximum Thermal Dissipation21.5 British Thermal Units (BTU) per Hour at 28.8 Volts
Isolation Voltage50 Volts (Continuous)
Enclosure Type RatingMeets IP65/66/67/69K (when marked)
Operating Temperature Range-4 to 140 degrees Fahrenheit
EmissionsGroup 1, Class A
Dimensions4.41 x 4.84 x 2.64 inches (112 x 123 x 67 millimeters)
Weight (Approx.)0.72 pounds (0.33 kilograms)
BrandAllen-Bradley / Rockwell Automation
SeriesArmorPoint Modules
Part Number1738-AENTR
Maximum # of Modules Supported63
# of Rack Optimized Connections5
Maximum # of Direct Connections20
Maximum Backplane Output Current0.8 Amps
Inrush Current, Maximum6 Amps for 10 Milliseconds
Input Overvoltage ProtectionReverse Polarity Protected
Maximum Power Consumption10.4 Watts at 28.8 Volts
Maximum Power Dissipation6.3 Watts at 28.8 Volts
Maximum Thermal Dissipation21.5 British Thermal Units (BTU) per Hour at 28.8 Volts
Isolation Voltage50 Volts (Continuous)
Enclosure Type RatingMeets IP65/66/67/69K (when marked)
Operating Temperature Range-4 to 140 degrees Fahrenheit
EmissionsGroup 1, Class A
Dimensions4.41 x 4.84 x 2.64 inches (112 x 123 x 67 millimeters)
Weight (Approx.)0.72 pounds (0.33 kilograms)
s

About 1738-AENTR

The Allen-Bradley 1738-AENTR adapter can support a maximum of 63 modules, 5 rack-optimized connections, and 20 direct connections. It has a maximum backplane output current of 0.8 Amps, although this can be extended with the use of a 1738-EP24DC backplane extension power supply. The 1738-AENTR adapter by Allen-Bradley has an input voltage rating of 24 Volts (nominal) with a 10 to 28.8 Volts voltage range. It has a maximum inrush current of 6 Amps for 10 milliseconds and reverse polarity input overvoltage protection. More general specifications on this adapter include a maximum power consumption of 10.4 Watts at 28.8 Volts and a maximum power dissipation of 6.3 Watts at 28.8 Volts. The maximum thermal dissipation on this adapter is 21.5 British Thermal Units (BTU) per Hour at 28.8 Volts.



 



The Allen-Bradley 1738-AENTR Series A adapter has an isolation voltage of 50 Volts (continuous) with a basic insulation type. The nominal field power bus voltage rates at 24 Volts, and the field power bus supply voltage range is 10 to 28.8 Volts. This adapter also has a maximum field power bus supply current of 10 Amps. It has an enclosure type rating that meets the IP 65, 66, 67, and 69K standards (when marked) and it weighs approximately 0.72 pounds, or 0.33 kilograms. The dimensions on this adapter are 4.41 x 4.84 x 2.64 inches, or 112 x 123 x 67 millimeters. The environmental specifications on this adapter include an operating temperature between -4 and 140 degrees Fahrenheit and a non-operating temperature between -40 and 185 degrees Fahrenheit. The relative humidity range on this adapter is between 5 and 95% (non-condensing). It has a Group 1, Class A emissions rating that is compliant with the CISPR 11 standards.



Repair Services for 1738-AENTR

Type Lead Time Price Action
Repair Service 2-4 weeks $495cartAdd to Cart

Our highly skilled technicians can repair your 1738-AENTR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1738-AENTR

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1738-AENTR

Resolutions For 1738-AENTR

About

Technical Specifications for 1738-AENTR

BrandAllen-Bradley / Rockwell Automation
SeriesArmorPoint Modules
Part Number1738-AENTR
Maximum # of Modules Supported63
# of Rack Optimized Connections5
Maximum # of Direct Connections20
Maximum Backplane Output Current0.8 Amps
Inrush Current, Maximum6 Amps for 10 Milliseconds
Input Overvoltage ProtectionReverse Polarity Protected
Maximum Power Consumption10.4 Watts at 28.8 Volts
Maximum Power Dissipation6.3 Watts at 28.8 Volts
Maximum Thermal Dissipation21.5 British Thermal Units (BTU) per Hour at 28.8 Volts
Isolation Voltage50 Volts (Continuous)
Enclosure Type RatingMeets IP65/66/67/69K (when marked)
Operating Temperature Range-4 to 140 degrees Fahrenheit
EmissionsGroup 1, Class A
Dimensions4.41 x 4.84 x 2.64 inches (112 x 123 x 67 millimeters)
Weight (Approx.)0.72 pounds (0.33 kilograms)
BrandAllen-Bradley / Rockwell Automation
SeriesArmorPoint Modules
Part Number1738-AENTR
Maximum # of Modules Supported63
# of Rack Optimized Connections5
Maximum # of Direct Connections20
Maximum Backplane Output Current0.8 Amps
Inrush Current, Maximum6 Amps for 10 Milliseconds
Input Overvoltage ProtectionReverse Polarity Protected
Maximum Power Consumption10.4 Watts at 28.8 Volts
Maximum Power Dissipation6.3 Watts at 28.8 Volts
Maximum Thermal Dissipation21.5 British Thermal Units (BTU) per Hour at 28.8 Volts
Isolation Voltage50 Volts (Continuous)
Enclosure Type RatingMeets IP65/66/67/69K (when marked)
Operating Temperature Range-4 to 140 degrees Fahrenheit
EmissionsGroup 1, Class A
Dimensions4.41 x 4.84 x 2.64 inches (112 x 123 x 67 millimeters)
Weight (Approx.)0.72 pounds (0.33 kilograms)

About 1738-AENTR

The Allen-Bradley 1738-AENTR adapter can support a maximum of 63 modules, 5 rack-optimized connections, and 20 direct connections. It has a maximum backplane output current of 0.8 Amps, although this can be extended with the use of a 1738-EP24DC backplane extension power supply. The 1738-AENTR adapter by Allen-Bradley has an input voltage rating of 24 Volts (nominal) with a 10 to 28.8 Volts voltage range. It has a maximum inrush current of 6 Amps for 10 milliseconds and reverse polarity input overvoltage protection. More general specifications on this adapter include a maximum power consumption of 10.4 Watts at 28.8 Volts and a maximum power dissipation of 6.3 Watts at 28.8 Volts. The maximum thermal dissipation on this adapter is 21.5 British Thermal Units (BTU) per Hour at 28.8 Volts.



 



The Allen-Bradley 1738-AENTR Series A adapter has an isolation voltage of 50 Volts (continuous) with a basic insulation type. The nominal field power bus voltage rates at 24 Volts, and the field power bus supply voltage range is 10 to 28.8 Volts. This adapter also has a maximum field power bus supply current of 10 Amps. It has an enclosure type rating that meets the IP 65, 66, 67, and 69K standards (when marked) and it weighs approximately 0.72 pounds, or 0.33 kilograms. The dimensions on this adapter are 4.41 x 4.84 x 2.64 inches, or 112 x 123 x 67 millimeters. The environmental specifications on this adapter include an operating temperature between -4 and 140 degrees Fahrenheit and a non-operating temperature between -40 and 185 degrees Fahrenheit. The relative humidity range on this adapter is between 5 and 95% (non-condensing). It has a Group 1, Class A emissions rating that is compliant with the CISPR 11 standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $495cartAdd to Cart

Our highly skilled technicians can repair your 1738-AENTR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $495cartAdd to Cart

Our highly skilled technicians can repair your 1738-AENTR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF