1791D-0B8P | Allen Bradley PLC CompactBlock I/O 1791D

1791D-0B8P

Rated 5 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1791D-0B8P

Revisions: Ser A Ser B Ser C 
Description: The 1791D-0B8P output module is a base output module from the Allen-Bradley/Rockwell Automation CompactBlock I/O 1791D series. It comes with 8 outputs. The 1791D-0B8P base output module can connect to an expansion input module or an expansion output module which will increase the number of I/O devices it can connect to and change the amount of bytes that it produces and consumes. It can connect to either a 16-channel expansion output module for a total of 24 outputs or to a 16-channel expansion input module for a total of 8 outputs and 16 inputs. The 1791D-0B8P base output module?s byte production and consumption ratings are 0 produced input bytes and 1 consumed output byte on its own, 1 produced input byte and 3 consumed output bytes with an expansion output module, and 3 produced input bytes and 1 consumed output byte with an expansion input module.
Available Now
Request a quote for 1791D-0B8P

Description: The 1791D-0B8P output module is a base output module from the Allen-Bradley/Rockwell Automation CompactBlock I/O 1791D series. It comes with 8 outputs. The 1791D-0B8P base output module can connect to an expansion input module or an expansion output module which will increase the number of I/O devices it can connect to and change the amount of bytes that it produces and consumes. It can connect to either a 16-channel expansion output module for a total of 24 outputs or to a 16-channel expansion input module for a total of 8 outputs and 16 inputs. The 1791D-0B8P base output module?s byte production and consumption ratings are 0 produced input bytes and 1 consumed output byte on its own, 1 produced input byte and 3 consumed output bytes with an expansion output module, and 3 produced input bytes and 1 consumed output byte with an expansion input module.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1791D-0B8P.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 10 reviews

    Technical Specifications for 1791D-0B8P

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1791D-0B8P
Inputs per Block0
Input TypeN/A
Input Off-state VoltageN/A
Input On-state VoltageN/A
Input Off-state CurrentN/A
Input On-state CurrentN/A
Outputs per Block8
Output TypeSourcing
Output On-state Voltage Range10-30V dc
Output On-state Current0.5 A max.
DeviceNet Power11-25V dc
EnclosureIEC IP20
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1791D-0B8P
Inputs per Block0
Input TypeN/A
Input Off-state VoltageN/A
Input On-state VoltageN/A
Input Off-state CurrentN/A
Input On-state CurrentN/A
Outputs per Block8
Output TypeSourcing
Output On-state Voltage Range10-30V dc
Output On-state Current0.5 A max.
DeviceNet Power11-25V dc
EnclosureIEC IP20
s

About 1791D-0B8P

The Allen-Bradley 1791D-0B8P is a DC compact block base module I/O. The 1791D-0B8P is one of 1791D series. This module has 8 outputs and no inputs. However, you can expand the number of inputs and outputs by using an expansion module. There are two expansion schemes you can use. First, the 1791D-0B8P can be expanded into 24 outputs and 0 inputs. On this scheme, the module will consume 3 output bytes and produce 1 input byte. This extra byte is returned to or shows the health of the expansion module. Second, 1791D-0B8P can be expanded into 8 output and 16 inputs. This scheme will make the module consume 3 output bytes and 1 input byte. This expansion also can make the DeviceNet current jump to 200 mA while the voltage will be around 11 to 25 Volts DC. 



The 1791D-0B8P contain several features: power supply, DeviceNet I/O adapter, and I/O circuit. The device power of this module is 10 to 30 Volts DC. Thus, it can accommodate a broad range of power supplies and many voltage levels. There is also output short-circuit protection. This feature would prevent any damage due to wiring mistakes. The  I/O block is located near the sensors and actuators. This can help you to reduce wiring cost and time needed to install the module. The 1791D-0B8P also has several product certifications such as CE marked for all applicable directives, UL, UL hazardous class I, C-UL, and C-UL hazardous class I. The enclosure of this module follows IEC IP20 standard. 



FAQ for 1791D-0B8P

What is the price of 1791D-0B8P?


Submit a quote request, send us an email or call 800-730-0292 for our best price.

Does DO Supply Inc. offer repairs for part 1791D-0B8P?


Yes. Our highly skilled technicians can repair your 1791D-0B8P. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process

Technical Description of 1791D-0B8P

COMPACTBLOCK I/O for DEVICENET Allen-Bradley AB with 8 Sourcing Outputs per Block.

Repair Services for 1791D-0B8P

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1791D-0B8P. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1791D-0B8P

Please refer to the manual for more information about the 1791D-0B8P such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1791D-0B8P Ser A
1791D-0B8P/A, Series A, Rev A Request Quote
1791D-0B8P Ser B
1791D-0B8P/B, Series B, Rev B Request Quote
1791D-0B8P Ser C
1791D-0B8P/C, Series C, Rev C Request Quote
Common misspellings:
  • l791D-0B8P
  • 179lD-0B8P
  • 1791D-oB8P
  • 1791D-088P
  • 1791D-0BbP
  • 1791D0B8P

Dimensions For 1791D-0B8P

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1791D-0B8P

Resolutions For 1791D-0B8P

About

Technical Specifications for 1791D-0B8P

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1791D-0B8P
Inputs per Block0
Input TypeN/A
Input Off-state VoltageN/A
Input On-state VoltageN/A
Input Off-state CurrentN/A
Input On-state CurrentN/A
Outputs per Block8
Output TypeSourcing
Output On-state Voltage Range10-30V dc
Output On-state Current0.5 A max.
DeviceNet Power11-25V dc
EnclosureIEC IP20
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1791D-0B8P
Inputs per Block0
Input TypeN/A
Input Off-state VoltageN/A
Input On-state VoltageN/A
Input Off-state CurrentN/A
Input On-state CurrentN/A
Outputs per Block8
Output TypeSourcing
Output On-state Voltage Range10-30V dc
Output On-state Current0.5 A max.
DeviceNet Power11-25V dc
EnclosureIEC IP20

About 1791D-0B8P

The Allen-Bradley 1791D-0B8P is a DC compact block base module I/O. The 1791D-0B8P is one of 1791D series. This module has 8 outputs and no inputs. However, you can expand the number of inputs and outputs by using an expansion module. There are two expansion schemes you can use. First, the 1791D-0B8P can be expanded into 24 outputs and 0 inputs. On this scheme, the module will consume 3 output bytes and produce 1 input byte. This extra byte is returned to or shows the health of the expansion module. Second, 1791D-0B8P can be expanded into 8 output and 16 inputs. This scheme will make the module consume 3 output bytes and 1 input byte. This expansion also can make the DeviceNet current jump to 200 mA while the voltage will be around 11 to 25 Volts DC. 



The 1791D-0B8P contain several features: power supply, DeviceNet I/O adapter, and I/O circuit. The device power of this module is 10 to 30 Volts DC. Thus, it can accommodate a broad range of power supplies and many voltage levels. There is also output short-circuit protection. This feature would prevent any damage due to wiring mistakes. The  I/O block is located near the sensors and actuators. This can help you to reduce wiring cost and time needed to install the module. The 1791D-0B8P also has several product certifications such as CE marked for all applicable directives, UL, UL hazardous class I, C-UL, and C-UL hazardous class I. The enclosure of this module follows IEC IP20 standard. 



FAQ for 1791D-0B8P

What is the price of 1791D-0B8P?


Submit a quote request, send us an email or call 800-730-0292 for our best price.

Does DO Supply Inc. offer repairs for part 1791D-0B8P?


Yes. Our highly skilled technicians can repair your 1791D-0B8P. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process

Technical Description of 1791D-0B8P

COMPACTBLOCK I/O for DEVICENET Allen-Bradley AB with 8 Sourcing Outputs per Block.
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1791D-0B8P. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1791D-0B8P. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1791D-0B8P such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1791D-0B8P Ser A
1791D-0B8P/A, Series A, Rev A Request Quote
1791D-0B8P Ser B
1791D-0B8P/B, Series B, Rev B Request Quote
1791D-0B8P Ser C
1791D-0B8P/C, Series C, Rev C Request Quote

Common misspellings:
  • l791D-0B8P
  • 179lD-0B8P
  • 1791D-oB8P
  • 1791D-088P
  • 1791D-0BbP
  • 1791D0B8P
PDF