Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley CompactLogix 1769-ARM

Product image is representative; revision or series may vary. Contact us to request a specific version.

1769-ARM

|
Need a Specific Revision?

The Allen Bradley Address Reserve I/O Module can be used with both CompactLogix and MicroLogix Processors. It has a current draw of 60 mA at 5.1V and a heat dissipation max of .3 Watts.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1769-ARM

ManufacturerAllen Bradley
CategoryPLCs
Product LineCompactLogix
Part Number1769-ARM
UPC781180609565
Weight0.25 lbs (0.11 kg)
Module TypeAddress Reserve Module
SeriesA and B
Isolation Voltage30 Volts Continuous
EnclosureOpen
Backplane Current1.4 Amps at 24 Volts
Power Consumption33.6 Watts
Power Dissipation7.5 Watts
View as PDF
Request a Repair

The Allen-Bradley 1769-ARM module reserves and replaces module slots. It begins to operate after it creates an I/O configuration and a user program that removes all further configuration to that module. Program references for the slot position that the 1769-ARM module occupies must not use another module’s parameters. The 1769-ARM has a 1-word input data file but no output and no configuration data files.

The 1769-ARM's current draw is 60 mA at 5.1 V. It has a maximum heat dissipation of 0.3W and a power supply distance rating of 8. It weighs approximately 0.62 lb and its approximate dimensions are 118 x 35 x 87 mm. It can become 138 mm high when mounted with tabs. The module can be DIN rail or panel mounted. Its compatible power supplies are 1769-PA2, 1769-PB2, 1769-PA4, 1769-PB4 and the module has an open style enclosure type rating.

The 1769-ARM module has a 32-140 °F operational temperature. Its storage temperature is -40 to 185° F and it has a 5-95% relative humidity. It comes with a maximum peak-to-peak operating vibration of 5g at 10-500 Hz and 2g relay operation. It has a 30G panel-mounted operating shock (20G DIN-rail-mounted) and a 7.5 G panel-mounted operating shock (5G DIN-rail mounted). It also has a 40G panel-mounted (30G DIN-rail-mounted) non-operating shock. The 1769-ARM’s radiated and conducted emissions are classified to EN 50081-2 Class A**.**

Revision Part #Also known as
1769-ARM Ser A1769-ARM/A, Series A, Rev A
Don't see your particular revision? Contact us now.