1769-IG16

In Stock Ships Today
Request a Quote for 1769-IG16
Allen Bradley 1769-IG16 CompactLogix 16 PT. 5 VDC TTL Input I-O Module. It uses copper wire.
Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1769-IG16.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:

Rated 4.8 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1769-IG16

Revisions: Ser A 
Description: Allen Bradley 1769-IG16 CompactLogix 16 PT. 5 VDC TTL Input I-O Module. It uses copper wire.
In Stock Ships Today
Request a quote for 1769-IG16

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1769-IG16.
Exchange: Exchange credit for your defective unit available.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 10 reviews

Technical Specifications for 1769-IG16

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1769-IG16
Product LineCompactLogix
Module Type16 Point TTL Input Module
Input TypeTTL Input
Communication Cable 16 Point
Shipping Weight2 lbs.
Shipping Dimensions8 x 8 x 5 in.
SeriesA and B
Distance Rating 8 Modules
Working Voltage Rating30 Volts AC/ 30 Volts DC
Replacement Terminal Block1769-RTBN18
Wire TypeCopper-90 degrees Celsius
Wire Size (Solid)22-14 AWG
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1769-IG16
Product LineCompactLogix
Module Type16 Point TTL Input Module
Input TypeTTL Input
Communication Cable 16 Point
Shipping Weight2 lbs.
Shipping Dimensions8 x 8 x 5 in.
SeriesA and B
Distance Rating 8 Modules
Working Voltage Rating30 Volts AC/ 30 Volts DC
Replacement Terminal Block1769-RTBN18
Wire TypeCopper-90 degrees Celsius
Wire Size (Solid)22-14 AWG

About 1769-IG16

The 1769-IG16 compact input TTL module by Allen-Bradley is an input module with 16 current-sourcing low to true inputs, and an operational voltage range of 4.5 to 5.5 Volts DC. It has a 50mV peak-to-peak ripple voltage and an 8 milliseconds input signal delay time. It is a digital input module with a digital filter with 0 seconds, 100 milliseconds, 500 milliseconds, 1 milliseconds, 2 milliseconds, 4 milliseconds, and 8 milliseconds selectable delay times for both ON to OFF and OFF to ON delay times. The 1769-IG16 has a draw current of 120mA at 5.1 Volts DC and dissipates 1.6W heat when operational. It also has an OFF-state voltage range between 2.0 and 5.5 Volts DC at 4.1mA and an ON-state voltage range of 2 to 5.5 Volts DC.

The 1769-IG16 has an isolation voltage of 75 Volts DC with a reinforced insulation type tested at 1697 Volts DC for 1 second between input points and BUS and has a power supply module with 8 modules for supply distance rating. It has a single slot width and is installed on either a DIN rail or the panel mount, using the 6 pounds on an inch terminal screws. It has a functional temperature range between -40 and 85 degrees Celsius (-40 and 185 degrees Fahrenheit) at 5 to 95% non-condensing relative humidity and it is built to operate at an altitude of up to 2000 meters (6561 feet) without de-rating. It has an operational shock rate of up to 30G and can withstand an operational vibration of 5G at 10 to 500 Hertz. The 1769-IG16 weighs approximately 250g (0.55 pounds) and measures 118 x 35 x 87 millimeters (4.65 x 1.38 x 3.43 inches).

Repair Services for 1769-IG16

Type Lead Time Price Action
Repair Service 2-4 weeks $683cartAdd to Cart

Our highly skilled technicians can repair your 1769-IG16. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1769-IG16

Please refer to the manual for more information about the 1769-IG16 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1769-IG16 Ser A
1769-IG16/A, Series A, Rev A Request Quote
Common misspellings:
  • l769-IG16
  • 1769-IGl6
  • 1769IG16

Dimensions For 1769-IG16

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1769-IG16

Resolutions For 1769-IG16

About

Technical Specifications for 1769-IG16

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1769-IG16
Product LineCompactLogix
Module Type16 Point TTL Input Module
Input TypeTTL Input
Communication Cable 16 Point
Shipping Weight2 lbs.
Shipping Dimensions8 x 8 x 5 in.
SeriesA and B
Distance Rating 8 Modules
Working Voltage Rating30 Volts AC/ 30 Volts DC
Replacement Terminal Block1769-RTBN18
Wire TypeCopper-90 degrees Celsius
Wire Size (Solid)22-14 AWG
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1769-IG16
Product LineCompactLogix
Module Type16 Point TTL Input Module
Input TypeTTL Input
Communication Cable 16 Point
Shipping Weight2 lbs.
Shipping Dimensions8 x 8 x 5 in.
SeriesA and B
Distance Rating 8 Modules
Working Voltage Rating30 Volts AC/ 30 Volts DC
Replacement Terminal Block1769-RTBN18
Wire TypeCopper-90 degrees Celsius
Wire Size (Solid)22-14 AWG

About 1769-IG16

The 1769-IG16 compact input TTL module by Allen-Bradley is an input module with 16 current-sourcing low to true inputs, and an operational voltage range of 4.5 to 5.5 Volts DC. It has a 50mV peak-to-peak ripple voltage and an 8 milliseconds input signal delay time. It is a digital input module with a digital filter with 0 seconds, 100 milliseconds, 500 milliseconds, 1 milliseconds, 2 milliseconds, 4 milliseconds, and 8 milliseconds selectable delay times for both ON to OFF and OFF to ON delay times. The 1769-IG16 has a draw current of 120mA at 5.1 Volts DC and dissipates 1.6W heat when operational. It also has an OFF-state voltage range between 2.0 and 5.5 Volts DC at 4.1mA and an ON-state voltage range of 2 to 5.5 Volts DC.

The 1769-IG16 has an isolation voltage of 75 Volts DC with a reinforced insulation type tested at 1697 Volts DC for 1 second between input points and BUS and has a power supply module with 8 modules for supply distance rating. It has a single slot width and is installed on either a DIN rail or the panel mount, using the 6 pounds on an inch terminal screws. It has a functional temperature range between -40 and 85 degrees Celsius (-40 and 185 degrees Fahrenheit) at 5 to 95% non-condensing relative humidity and it is built to operate at an altitude of up to 2000 meters (6561 feet) without de-rating. It has an operational shock rate of up to 30G and can withstand an operational vibration of 5G at 10 to 500 Hertz. The 1769-IG16 weighs approximately 250g (0.55 pounds) and measures 118 x 35 x 87 millimeters (4.65 x 1.38 x 3.43 inches).

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $683cartAdd to Cart

Our highly skilled technicians can repair your 1769-IG16. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $683cartAdd to Cart

Our highly skilled technicians can repair your 1769-IG16. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1769-IG16 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1769-IG16 Ser A
1769-IG16/A, Series A, Rev A Request Quote

Common misspellings:
  • l769-IG16
  • 1769-IGl6
  • 1769IG16
PDF