SST-ESR2-CPX-P | Allen Bradley PLC CompactLogix 5069

SST-ESR2-CPX-P

*Disclaimer: This unit does not ship with terminal blocks. Terminal blocks may be present in photographs for illustrative purposes.

Rated 4.9 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

SST-ESR2-CPX-P

Revisions: Ser A 
Description: The Woodhead SST-ESR2-CPX-P SST ETH/SER In Chassis Module is used in conjunction with the Allen-Bradley CompactLogix series. It has 256 Commands per Port and 3 Ports.
Call
Request a quote for SST-ESR2-CPX-P

Description:

The Woodhead SST-ESR2-CPX-P SST ETH/SER In Chassis Module is used in conjunction with the Allen-Bradley CompactLogix series. It has 256 Commands per Port and 3 Ports.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the SST-ESR2-CPX-P.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 15 reviews

    Technical Specifications for SST-ESR2-CPX-P

Part NumberSST-ESR2-CPX-P
ManufacturerWoodhead
Product TypeSST ETH/SER In Chassis Module
Applicable Allen-Bradley SeriesCompactLogix
Commands per Port256
Ports3
Network Connection TypeEthernet: RJ45, Serial: D-Sub Male (9 pin)
SlaveSerial Modbus RTU/ASCII
Weight175 g
Part NumberSST-ESR2-CPX-P
ManufacturerWoodhead
Product TypeSST ETH/SER In Chassis Module
Applicable Allen-Bradley SeriesCompactLogix
Commands per Port256
Ports3
Network Connection TypeEthernet: RJ45, Serial: D-Sub Male (9 pin)
SlaveSerial Modbus RTU/ASCII
Weight175 g
s

About SST-ESR2-CPX-P

The SST-ESR2-CPX-P module is a PLC communication PLUS module for MODBUS systems. It supports MODBUS Master/Slave ASCII and RTU MODBUS TCP/UDP Client/Server communications. This device is an in-rack module for Allen-Bradley/Rockwell Automation CompactLogix PLCs (L2 and L3 controllers). The SST-ESR2-CPX-P module integrates MODBUS and MODBUS/TCP protocols for delivering efficient and low-cost networking in applications related to industrial automation. It is carefully designed to safeguard data transmission and to be a robust and reliable networking solution with high resistance to electrical noise. It is installed in complex machines in the oil and gas industry and water and waste treatment plants. These are industrial fields that try to simplify communication and data acquisition by installing the SST-ESR2-CPX-P module. The module includes an SD card for data storage. There are built-in LED status lights on the front of the module. These LEDs are the OK, STATE, LINK, SPEED, SD, and FAULT LEDs. 



The SST-ESR2-CPX-P module uses the Configuration Console engineering tool, and its configuration is stored on the SD card. One of the main purposes of this module is to reduce the engineering time needed for building machines because it eliminates the CompactLogix direct mapping of MODBUS I/O and time-consuming ladder logic writing.  It will also handle data-intensive applications efficiently and reduce commissioning time. Users can use one 10/100 Mbps Ethernet port for the MODBUS TCP, diagnostics, and configuration of the device. There are also 2 RS232/RS485/RS422 serial ports (configurable from 110 bps to 115.2 kbps). All ports are 2,500 Volts galvanic isolated. The operating temperature of the module is 0 to 60 degrees Celsius. It is CE, RoHS, and FCC certified device.



Repair Services for SST-ESR2-CPX-P

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SST-ESR2-CPX-P. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for SST-ESR2-CPX-P

Please refer to the manual for more information about the SST-ESR2-CPX-P such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
SST-ESR2-CPX-P Ser A
SST-ESR2-CPX-P/A, Series A, Rev A Request Quote
Common misspellings:
  • SSTESR2CPXP

Dimensions For SST-ESR2-CPX-P

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For SST-ESR2-CPX-P

Resolutions For SST-ESR2-CPX-P

About

Technical Specifications for SST-ESR2-CPX-P

Part NumberSST-ESR2-CPX-P
ManufacturerWoodhead
Product TypeSST ETH/SER In Chassis Module
Applicable Allen-Bradley SeriesCompactLogix
Commands per Port256
Ports3
Network Connection TypeEthernet: RJ45, Serial: D-Sub Male (9 pin)
SlaveSerial Modbus RTU/ASCII
Weight175 g
Part NumberSST-ESR2-CPX-P
ManufacturerWoodhead
Product TypeSST ETH/SER In Chassis Module
Applicable Allen-Bradley SeriesCompactLogix
Commands per Port256
Ports3
Network Connection TypeEthernet: RJ45, Serial: D-Sub Male (9 pin)
SlaveSerial Modbus RTU/ASCII
Weight175 g

About SST-ESR2-CPX-P

The SST-ESR2-CPX-P module is a PLC communication PLUS module for MODBUS systems. It supports MODBUS Master/Slave ASCII and RTU MODBUS TCP/UDP Client/Server communications. This device is an in-rack module for Allen-Bradley/Rockwell Automation CompactLogix PLCs (L2 and L3 controllers). The SST-ESR2-CPX-P module integrates MODBUS and MODBUS/TCP protocols for delivering efficient and low-cost networking in applications related to industrial automation. It is carefully designed to safeguard data transmission and to be a robust and reliable networking solution with high resistance to electrical noise. It is installed in complex machines in the oil and gas industry and water and waste treatment plants. These are industrial fields that try to simplify communication and data acquisition by installing the SST-ESR2-CPX-P module. The module includes an SD card for data storage. There are built-in LED status lights on the front of the module. These LEDs are the OK, STATE, LINK, SPEED, SD, and FAULT LEDs. 



The SST-ESR2-CPX-P module uses the Configuration Console engineering tool, and its configuration is stored on the SD card. One of the main purposes of this module is to reduce the engineering time needed for building machines because it eliminates the CompactLogix direct mapping of MODBUS I/O and time-consuming ladder logic writing.  It will also handle data-intensive applications efficiently and reduce commissioning time. Users can use one 10/100 Mbps Ethernet port for the MODBUS TCP, diagnostics, and configuration of the device. There are also 2 RS232/RS485/RS422 serial ports (configurable from 110 bps to 115.2 kbps). All ports are 2,500 Volts galvanic isolated. The operating temperature of the module is 0 to 60 degrees Celsius. It is CE, RoHS, and FCC certified device.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SST-ESR2-CPX-P. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your SST-ESR2-CPX-P. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the SST-ESR2-CPX-P such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
SST-ESR2-CPX-P Ser A
SST-ESR2-CPX-P/A, Series A, Rev A Request Quote

Common misspellings:
  • SSTESR2CPXP
PDF