1751-SL4SP - In Stock | Allen Bradley PLC ControlLogix

1751-SL4SP

Rated 4.5 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1751-SL4SP

Revisions: Ser A 
Description: The Allen-Bradley 1751-SL4SP is a SynchLink Block.
In Stock Ships Today
Request a quote for 1751-SL4SP

Description: The Allen-Bradley 1751-SL4SP is a SynchLink Block.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1751-SL4SP.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 18 reviews

    Technical Specifications for 1751-SL4SP

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1751-SL4SP
SeriesControlLogix
Module TypeSynchLink Block
VoltageSupply 5.1 V DC Class 2
CurrentSupply 300 mA, Output 4 Visible (650 nm; 8 DB A Max) Fiber-Optic Light Source
EmissionsClass A
ESD Immunity8 kV Air Discharges, 4 kV Contact Discharges
Terminal Block TorqueN/A
Wire TypeCopper
Optiacl Output Power1 mm POF: +1.3 dBM, 200 um HSC: -7.2 dBM
Enclosure TypeNone (Open-Style)
UPC10612598184597
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1751-SL4SP
SeriesControlLogix
Module TypeSynchLink Block
VoltageSupply 5.1 V DC Class 2
CurrentSupply 300 mA, Output 4 Visible (650 nm; 8 DB A Max) Fiber-Optic Light Source
EmissionsClass A
ESD Immunity8 kV Air Discharges, 4 kV Contact Discharges
Terminal Block TorqueN/A
Wire TypeCopper
Optiacl Output Power1 mm POF: +1.3 dBM, 200 um HSC: -7.2 dBM
Enclosure TypeNone (Open-Style)
UPC10612598184597
s

About 1751-SL4SP

The Allen-Bradley 1751-SL4SP is a part of the SynchLink Communication Module for ControlLogix systems. It can facilitate distributed motion implementation and drive-based systems on ControlLogix products using fiber optic communication link. It only transfers general and axis-data thus it should be used together with standard control networks such as EtherNet/IP or ControlNet for control and diagnostic data transfer. It also provides time synchronization between master and slave devices.

The 1751-SL4SP is a 4-port splitter block of a SynchLink hub that converts signal from the base block from electrical to optical and sends it through its 4 output ports. It is DIN rail-mounted for installation and one base block can be plugged with up to 4 splitter blocks. It has a communication rate of 5M bit/s and power consumption of 0.300 A at 5.1V DC. Fiber-optic cable used must be 200/230 microns HCS (Hard Clad Silica) with Versalink V-System termination ranging from 1 – 300 meters.

The SynchLink communication module maintains system time coordination between all ControlLogix chassis. It performs high-speed limited data transfer between chassis and shares axis data among various controllers in different chassis. The 1751-SL4SP block must be mounted within a NEMA standard enclosure to prevent personal injury. It is intended for use in an industrial environment having Overvoltage Category II Standard with a 0 - 55°C (32 - 131°F) operating temperature, a 30g operating shock, and a 5 - 90% noncondensing relative humidity.



Repair Services for 1751-SL4SP

Type Lead Time Price Action
Repair Service 2-4 weeks $103cartAdd to Cart

Our highly skilled technicians can repair your 1751-SL4SP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1751-SL4SP

Please refer to the manual for more information about the 1751-SL4SP such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1751-SL4SP Ser A
1751-SL4SP/A, Series A, Rev A Request Quote
Common misspellings:
  • l751-SL4SP
  • 175l-SL4SP
  • 1751-S14SP
  • 1751-SLASP
  • 1751SL4SP

Dimensions For 1751-SL4SP

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1751-SL4SP

Resolutions For 1751-SL4SP

About

Technical Specifications for 1751-SL4SP

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1751-SL4SP
SeriesControlLogix
Module TypeSynchLink Block
VoltageSupply 5.1 V DC Class 2
CurrentSupply 300 mA, Output 4 Visible (650 nm; 8 DB A Max) Fiber-Optic Light Source
EmissionsClass A
ESD Immunity8 kV Air Discharges, 4 kV Contact Discharges
Terminal Block TorqueN/A
Wire TypeCopper
Optiacl Output Power1 mm POF: +1.3 dBM, 200 um HSC: -7.2 dBM
Enclosure TypeNone (Open-Style)
UPC10612598184597
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1751-SL4SP
SeriesControlLogix
Module TypeSynchLink Block
VoltageSupply 5.1 V DC Class 2
CurrentSupply 300 mA, Output 4 Visible (650 nm; 8 DB A Max) Fiber-Optic Light Source
EmissionsClass A
ESD Immunity8 kV Air Discharges, 4 kV Contact Discharges
Terminal Block TorqueN/A
Wire TypeCopper
Optiacl Output Power1 mm POF: +1.3 dBM, 200 um HSC: -7.2 dBM
Enclosure TypeNone (Open-Style)
UPC10612598184597

About 1751-SL4SP

The Allen-Bradley 1751-SL4SP is a part of the SynchLink Communication Module for ControlLogix systems. It can facilitate distributed motion implementation and drive-based systems on ControlLogix products using fiber optic communication link. It only transfers general and axis-data thus it should be used together with standard control networks such as EtherNet/IP or ControlNet for control and diagnostic data transfer. It also provides time synchronization between master and slave devices.

The 1751-SL4SP is a 4-port splitter block of a SynchLink hub that converts signal from the base block from electrical to optical and sends it through its 4 output ports. It is DIN rail-mounted for installation and one base block can be plugged with up to 4 splitter blocks. It has a communication rate of 5M bit/s and power consumption of 0.300 A at 5.1V DC. Fiber-optic cable used must be 200/230 microns HCS (Hard Clad Silica) with Versalink V-System termination ranging from 1 – 300 meters.

The SynchLink communication module maintains system time coordination between all ControlLogix chassis. It performs high-speed limited data transfer between chassis and shares axis data among various controllers in different chassis. The 1751-SL4SP block must be mounted within a NEMA standard enclosure to prevent personal injury. It is intended for use in an industrial environment having Overvoltage Category II Standard with a 0 - 55°C (32 - 131°F) operating temperature, a 30g operating shock, and a 5 - 90% noncondensing relative humidity.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $103cartAdd to Cart

Our highly skilled technicians can repair your 1751-SL4SP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $103cartAdd to Cart

Our highly skilled technicians can repair your 1751-SL4SP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1751-SL4SP such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1751-SL4SP Ser A
1751-SL4SP/A, Series A, Rev A Request Quote

Common misspellings:
  • l751-SL4SP
  • 175l-SL4SP
  • 1751-S14SP
  • 1751-SLASP
  • 1751SL4SP
PDF