The 1756-CFM ControlLogix Configurable Flowmeter by Allen-Bradley is a module located on the ControlLogix Chassis, with a single-slot for interfacing between the LogixController and the external I/O devices. It has 4 inputs (2 flow-meter, and 2 gate inputs) with an IEC-certified current rating between 6 and 30mA at 24V DC and at a maximum input frequency of 100 KHz. It has a flow-meter input voltage ranging between +/- 30V DC with a selectable input threshold of 50mV, 1.3V, and 4V and an impedance of 5kΩ. The 1756-CFM input has a firmware selectable filtering, with a filter rate of 100 KHz or 70Hz, and a gate input rating of 4.5-5.5V DC (5V operation) and 10-31.2V DC (24 operations) at a 15mA nominal ON state current.
The 1756-CFM has two current sourcing (IEC 1A, 24V DC) outputs with output ratings of 4.5-5.5V DC for 3-20 mA load per point, and 10-31.2V DC for 40mA to 1A load per point. The output has a surge current of 2A for 50ms re-curing every 2s with an OFF state current leakage of <300µA at 31.2V. Its output switching time is 1ms and with an overload current of 4A it offers short-circuit protection. The 1756-CFM has a backplane current of 300mA at 5.1V DC and 6mA at 24V DC and it has a maximum power dissipation of 6W (20.4 BTU/hr). Its operational temperature ranges between 0 and 60°C (32 and 140°F) at 5-95% non-condensing relative humidity limit and it is built to withstand an operational shock of up to 30G.
Repair Services for 1756-CFM
||$761||Add to Cart |
Our highly skilled technicians can repair your ControlLogix 1756-CFM. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions for 1756-CFM
Please refer to the manual for more information about the 1756-CFM such as the wiring diagrams, data sheets,
firmware information and migration or obsolescence details.
|Revision Part #
||Also Known as
||1756-CFM/A, Series A, Rev A