1756-CP3 | Allen Bradley PLC ControlLogix

1756-CP3

Rated 4.8 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-CP3

Revisions: Ser A 
Description: Allen Bradley ControlLogix Programmer Cable with 10 feet (3 meters) Length
Available Now
Request a quote for 1756-CP3

Description: Allen Bradley ControlLogix Programmer Cable with 10 feet (3 meters) Length

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-CP3.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 14 reviews

    Technical Specifications for 1756-CP3

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-CP3
SeriesControlLogix
Cable TypeProgrammer Cable
Length10 feet (3 meters)
Weight0.3 pounds (0.2 kilograms)
ControlNet Communication Rate5 megabits-second
Configuration Redundant
Input Current970 milliamps at 5.1 Volts DC, 1.7 milliamps at 24 Volts DC
Thermal Dissipation17.4 BTU per Hour
Power Dissipation5.1Watts
Slot width1
Weight0.64 pounds (0.293 kilograms)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-CP3
SeriesControlLogix
Cable TypeProgrammer Cable
Length10 feet (3 meters)
Weight0.3 pounds (0.2 kilograms)
ControlNet Communication Rate5 megabits-second
Configuration Redundant
Input Current970 milliamps at 5.1 Volts DC, 1.7 milliamps at 24 Volts DC
Thermal Dissipation17.4 BTU per Hour
Power Dissipation5.1Watts
Slot width1
Weight0.64 pounds (0.293 kilograms)
s

About 1756-CP3

The 1756-CP3 ControlLogix Programmer Cable by Allen-Bradley is a programming connector cable which connects the SLC Modular Programmable Controllers and the Logix 5550 controllers to any compatible Data Terminal Equipment (DTE) devices. It is a 3-meter (118-inches) long connector cable with right angle and straight connector ends which connects to an SLC or Logix 5550 controller through the 900 female 9–pin D–shell connector end, and connect to a computer or any DTE devices through the straight female 9–pin D–shell connector end.



Repair Services for 1756-CP3

Type Lead Time Price Action
Repair Service 2-4 weeks $152cartAdd to Cart

Our highly skilled technicians can repair your ControlLogix 1756-CP3. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1756-CP3

Please refer to the manual for more information about the 1756-CP3 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-CP3 Ser A
1756-CP3/A, Series A, Rev A Request Quote
Common misspellings:
  • l756-CP3
  • 1756CP3

Dimensions For 1756-CP3

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-CP3

Resolutions For 1756-CP3

About

Technical Specifications for 1756-CP3

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-CP3
SeriesControlLogix
Cable TypeProgrammer Cable
Length10 feet (3 meters)
Weight0.3 pounds (0.2 kilograms)
ControlNet Communication Rate5 megabits-second
Configuration Redundant
Input Current970 milliamps at 5.1 Volts DC, 1.7 milliamps at 24 Volts DC
Thermal Dissipation17.4 BTU per Hour
Power Dissipation5.1Watts
Slot width1
Weight0.64 pounds (0.293 kilograms)
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-CP3
SeriesControlLogix
Cable TypeProgrammer Cable
Length10 feet (3 meters)
Weight0.3 pounds (0.2 kilograms)
ControlNet Communication Rate5 megabits-second
Configuration Redundant
Input Current970 milliamps at 5.1 Volts DC, 1.7 milliamps at 24 Volts DC
Thermal Dissipation17.4 BTU per Hour
Power Dissipation5.1Watts
Slot width1
Weight0.64 pounds (0.293 kilograms)

About 1756-CP3

The 1756-CP3 ControlLogix Programmer Cable by Allen-Bradley is a programming connector cable which connects the SLC Modular Programmable Controllers and the Logix 5550 controllers to any compatible Data Terminal Equipment (DTE) devices. It is a 3-meter (118-inches) long connector cable with right angle and straight connector ends which connects to an SLC or Logix 5550 controller through the 900 female 9–pin D–shell connector end, and connect to a computer or any DTE devices through the straight female 9–pin D–shell connector end.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $152cartAdd to Cart

Our highly skilled technicians can repair your ControlLogix 1756-CP3. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $152cartAdd to Cart

Our highly skilled technicians can repair your ControlLogix 1756-CP3. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1756-CP3 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-CP3 Ser A
1756-CP3/A, Series A, Rev A Request Quote

Common misspellings:
  • l756-CP3
  • 1756CP3
PDF