1756-DMD30 | Allen Bradley PLC ControlLogix

1756-DMD30

Rated 4.5 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-DMD30

Description: The 1756-DMD30 module is an Allen-Bradley ControlLogix drive module. The 1756-DMD30 module is a single-slot ControlLogix module which enables interfacing with the Reliance Electric Distributed Power System (DPS) equipment.
Available Now
Request a quote for 1756-DMD30

Description:

The 1756-DMD30 module is an Allen-Bradley ControlLogix drive module. The 1756-DMD30 module is a single-slot ControlLogix module which enables interfacing with the Reliance Electric Distributed Power System (DPS) equipment.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-DMD30.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 14 reviews

    Technical Specifications for 1756-DMD30

BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-DMD30
Product typeControlLogix drive module
CompatibilitySD3000 6 Pulse DPS, SD3000 12 Pulse
Power requirement3 milliamps at 24 Volts DC , 1.35 Amps at 5.1 Volts DC
Peak power dissipation6.96 Watts
Thermal dissipation23.7 BTU per hour
Operating temperature32 to 140 degrees Fahrenheit
Storage temperature-40 to 185 degrees Fahrenheit
MTBF1.7 million hours
UPC10612598282798
BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-DMD30
Product typeControlLogix drive module
CompatibilitySD3000 6 Pulse DPS, SD3000 12 Pulse
Power requirement3 milliamps at 24 Volts DC , 1.35 Amps at 5.1 Volts DC
Peak power dissipation6.96 Watts
Thermal dissipation23.7 BTU per hour
Operating temperature32 to 140 degrees Fahrenheit
Storage temperature-40 to 185 degrees Fahrenheit
MTBF1.7 million hours
UPC10612598282798
s

About 1756-DMD30

The 1756-DMD30 Allen-Bradley ControlLogix drive module is a single-slot industrial ControlLogix module which enables device interfacing with the Reliance Electric Distributed Power System (DPS) equipment. Each 1756-DMD30 module interfaces with an individual Power Module Interface (PMI) chassis and it performs outer torque, position, and velocity control. The 1756-DMD30 module works with SD3000 6 Pulse DPS equipment system which is an S6 DC drive and an S6R resolver and with the SD3000 12-Pulse equipment system which is a S12 DC drive and S12R resolver.



 



The 1756-DMD30 module is installed inside a ControlLogix chassis and it communicates to the SynchLink nodes through the fiber optic network. The 1756-DMD30 module also connects to PMI chassis through fiber optic cables. The 1756-DMD30 module is a single-slot module and it operates on DC power that is supplied by the ControlLogix chassis. The module current consumption rating at 24 Volts DC is 3 milliamps and at 5.1 Volts DC, it is 1.35 Amps. The peak module power dissipation is 6.96 Watts and the thermal dissipation is 23.7 BTU per hour. Green and red indicators are provided on the module for diagnostics, status, and operation updates. The storage and operating temperature ranges are -40 to 185 degrees Fahrenheit and 32 to 140 degrees Fahrenheit, respectively. The operating shock rating is 30 G. The recommended ambient relative humidity range is 5 to 95%. The mean time between failure for the 1756-DMD30 module is 1.7 million hours.

Repair Services for 1756-DMD30

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-DMD30. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1756-DMD30

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-DMD30

Resolutions For 1756-DMD30

About

Technical Specifications for 1756-DMD30

BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-DMD30
Product typeControlLogix drive module
CompatibilitySD3000 6 Pulse DPS, SD3000 12 Pulse
Power requirement3 milliamps at 24 Volts DC , 1.35 Amps at 5.1 Volts DC
Peak power dissipation6.96 Watts
Thermal dissipation23.7 BTU per hour
Operating temperature32 to 140 degrees Fahrenheit
Storage temperature-40 to 185 degrees Fahrenheit
MTBF1.7 million hours
UPC10612598282798
BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-DMD30
Product typeControlLogix drive module
CompatibilitySD3000 6 Pulse DPS, SD3000 12 Pulse
Power requirement3 milliamps at 24 Volts DC , 1.35 Amps at 5.1 Volts DC
Peak power dissipation6.96 Watts
Thermal dissipation23.7 BTU per hour
Operating temperature32 to 140 degrees Fahrenheit
Storage temperature-40 to 185 degrees Fahrenheit
MTBF1.7 million hours
UPC10612598282798

About 1756-DMD30

The 1756-DMD30 Allen-Bradley ControlLogix drive module is a single-slot industrial ControlLogix module which enables device interfacing with the Reliance Electric Distributed Power System (DPS) equipment. Each 1756-DMD30 module interfaces with an individual Power Module Interface (PMI) chassis and it performs outer torque, position, and velocity control. The 1756-DMD30 module works with SD3000 6 Pulse DPS equipment system which is an S6 DC drive and an S6R resolver and with the SD3000 12-Pulse equipment system which is a S12 DC drive and S12R resolver.



 



The 1756-DMD30 module is installed inside a ControlLogix chassis and it communicates to the SynchLink nodes through the fiber optic network. The 1756-DMD30 module also connects to PMI chassis through fiber optic cables. The 1756-DMD30 module is a single-slot module and it operates on DC power that is supplied by the ControlLogix chassis. The module current consumption rating at 24 Volts DC is 3 milliamps and at 5.1 Volts DC, it is 1.35 Amps. The peak module power dissipation is 6.96 Watts and the thermal dissipation is 23.7 BTU per hour. Green and red indicators are provided on the module for diagnostics, status, and operation updates. The storage and operating temperature ranges are -40 to 185 degrees Fahrenheit and 32 to 140 degrees Fahrenheit, respectively. The operating shock rating is 30 G. The recommended ambient relative humidity range is 5 to 95%. The mean time between failure for the 1756-DMD30 module is 1.7 million hours.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-DMD30. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-DMD30. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF