1756-EN4TR | Allen Bradley PLC ControlLogix

1756-EN4TR

Rated 4.9 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-EN4TR

Description: The Allen-Bradley/Rockwell Automation 1756-EN4TR module is a controller module. It is part of the Allen-Bradley ControlLogix series. The 1756-EN4TR module can communicate at Ethernet speeds of up to 1 Gbps.
Call
Request a quote for 1756-EN4TR

Description:

The Allen-Bradley/Rockwell Automation 1756-EN4TR module is a controller module. It is part of the Allen-Bradley ControlLogix series. The 1756-EN4TR module can communicate at Ethernet speeds of up to 1 Gbps.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-EN4TR.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 12 reviews

    Technical Specifications for 1756-EN4TR

ManufacturerAllen-Bradley/Rockwell Automation
SeriesControlLogix
Part Number1756-EN4TR
Product TypeController Module
NetworkEthernet/IP
TopologiesStar and DLR
MediaCopper
Communication Speeds10 Mbps, 100 Mbps, 1 Gbps
SNMP SupportYes
ManufacturerAllen-Bradley/Rockwell Automation
SeriesControlLogix
Part Number1756-EN4TR
Product TypeController Module
NetworkEthernet/IP
TopologiesStar and DLR
MediaCopper
Communication Speeds10 Mbps, 100 Mbps, 1 Gbps
SNMP SupportYes
s

About 1756-EN4TR

The 1756-EN4TR module is a ControlLogix series controller module that has been manufactured by Allen-Bradley/Rockwell Automation. This controller module is made for the Ethernet/IP network. The 1756-EN4TR controller module can be used in a control system that has a star topology or a DLR topology. This controller can be used as an Ethernet/IP bridge device that uses copper media and has an embedded switch. It can handle communication rates of 10 Mbps, 100 Mbps, or 1 Gbps, and it can handle integrated motion on up to 256 Ethernet/IP network axes. The 1756-EN4TR controller module has SNMP support, but note that this requires a password.



 



The Allen-Bradley/Rockwell Automation ControlLogix 1756-EN4TR controller module cannot support or be used in an extended environment. Its packet rate capacity for I/O, measured in packets per second, varies depending on the device setup. The packet rate capacity can be 50,000 packets per second without CIP security, 25,000 packets per second with integrity, and 15,000 packets per second with integrity and confidentiality. Some of the key applications for the 1756-EN4TR controller module include applications controlling I/O modules and drives, working as an adapter for the I/O on remote Ethernet/IP links, communicating with HMIs and other Ethernet/IP devices, and applications bridging Ethernet/IP links in order to route messages to devices that are on other networks. It supports redundant adapters. The 1756-EN4TR controller module can be used in the explicit protected mode when required, and this mode does not allow any configuration changes to be made to the module while it is active.

Repair Services for 1756-EN4TR

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-EN4TR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1756-EN4TR

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-EN4TR

Resolutions For 1756-EN4TR

About

Technical Specifications for 1756-EN4TR

ManufacturerAllen-Bradley/Rockwell Automation
SeriesControlLogix
Part Number1756-EN4TR
Product TypeController Module
NetworkEthernet/IP
TopologiesStar and DLR
MediaCopper
Communication Speeds10 Mbps, 100 Mbps, 1 Gbps
SNMP SupportYes
ManufacturerAllen-Bradley/Rockwell Automation
SeriesControlLogix
Part Number1756-EN4TR
Product TypeController Module
NetworkEthernet/IP
TopologiesStar and DLR
MediaCopper
Communication Speeds10 Mbps, 100 Mbps, 1 Gbps
SNMP SupportYes

About 1756-EN4TR

The 1756-EN4TR module is a ControlLogix series controller module that has been manufactured by Allen-Bradley/Rockwell Automation. This controller module is made for the Ethernet/IP network. The 1756-EN4TR controller module can be used in a control system that has a star topology or a DLR topology. This controller can be used as an Ethernet/IP bridge device that uses copper media and has an embedded switch. It can handle communication rates of 10 Mbps, 100 Mbps, or 1 Gbps, and it can handle integrated motion on up to 256 Ethernet/IP network axes. The 1756-EN4TR controller module has SNMP support, but note that this requires a password.



 



The Allen-Bradley/Rockwell Automation ControlLogix 1756-EN4TR controller module cannot support or be used in an extended environment. Its packet rate capacity for I/O, measured in packets per second, varies depending on the device setup. The packet rate capacity can be 50,000 packets per second without CIP security, 25,000 packets per second with integrity, and 15,000 packets per second with integrity and confidentiality. Some of the key applications for the 1756-EN4TR controller module include applications controlling I/O modules and drives, working as an adapter for the I/O on remote Ethernet/IP links, communicating with HMIs and other Ethernet/IP devices, and applications bridging Ethernet/IP links in order to route messages to devices that are on other networks. It supports redundant adapters. The 1756-EN4TR controller module can be used in the explicit protected mode when required, and this mode does not allow any configuration changes to be made to the module while it is active.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-EN4TR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-EN4TR. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF