1756-IH16ISOE - In Stock | Allen Bradley PLC ControlLogix

1756-IH16ISOE

Rated 4.6 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-IH16ISOE

Revisions: Ser A 
Description: Allen Bradley ControlLogix Digital Isolated Input Module Series of Events with 16 Individually Isolated; SOE Inputs
In Stock Ships Today
Request a quote for 1756-IH16ISOE

Description: Allen Bradley ControlLogix Digital Isolated Input Module Series of Events with 16 Individually Isolated; SOE Inputs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-IH16ISOE.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 9 reviews

    Technical Specifications for 1756-IH16ISOE

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-IH16ISOE
SeriesControlLogix
Module TypeDigital Isolated Input Module Series of Events
Inputs16 Individually Isolated; SOE
Input Voltage125 Volts DC Sink-Source
Operating Voltage Range90-140 Volts DC
Input Delay Time75 microseconds plus selected filter time
Minimum Operating Current1.15 milliamps at 90 Volts DC
Maximum Operating Current1.85 milliamps at 140 Volts DC
Maximum Input Current, Off-State0.3 milliamps
Power Dissipation (Max)5.5 Watts at 60 degrees Celsius
Backplane Current at 5 Volts275 milliamps
Backplane Current at 24 Volts2 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-IH16ISOE
SeriesControlLogix
Module TypeDigital Isolated Input Module Series of Events
Inputs16 Individually Isolated; SOE
Input Voltage125 Volts DC Sink-Source
Operating Voltage Range90-140 Volts DC
Input Delay Time75 microseconds plus selected filter time
Minimum Operating Current1.15 milliamps at 90 Volts DC
Maximum Operating Current1.85 milliamps at 140 Volts DC
Maximum Input Current, Off-State0.3 milliamps
Power Dissipation (Max)5.5 Watts at 60 degrees Celsius
Backplane Current at 5 Volts275 milliamps
Backplane Current at 24 Volts2 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
s

About 1756-IH16ISOE

The Allen-Bradley 1756-IH16ISOE is a sequence of events module. It has 16 individually isolated inputs available and is compatible with the ControlLogix system. Before it can be connected to the 1756 ControlLogix chassis, it requires either the 1756-TBCH or 1756-TBS6H removable terminal block housing, or RTB. Features of the 1756-IH16ISOE DC sink/source digital input module include per point isolation, FIFO mode operation, and per point timestamping. This module also supports a change of state, although it uses the Enable CST Capture feature. The on-state operating voltage range of the 1756-IH16ISOE is 90 to 140 Volts DC, with a nominal input voltage of 125 Volts DC and this is the same as its sink/source voltage category. Its current draw at 5.1 Volts is 275 milliamps and 2 milliamps at 24 Volts. The module has a total backplane power of 1.3 Watts, thermal dissipation of 17.22 BTU/hour, and a maximum power dissipation of 5.5 Watts at 60 Degrees Celsius. While in off-state, it has a maximum current of 0.3 milliamps and a maximum voltage of 20 Volts. The module's current while in on-state ranges from 1.15 milliamps at 90 Volts DC to 1.85 milliamps at 140 Volts DC. It has an isolation of 250 Volts continuous between inputs. Similar to other modules, the 1756-IH16ISOE has a screw to backplane input delay time.

Repair Services for 1756-IH16ISOE

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your ControlLogix 1756-IH16ISOE. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.

Revisions for 1756-IH16ISOE

Please refer to the manual for more information about the 1756-IH16ISOE such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-IH16ISOE Ser A
1756-IH16ISOE/A, Series A, Rev A Request Quote
Common misspellings:
  • l756-IH16ISOE
  • 1756-IHl6ISOE
  • 1756-IH16IS0E
  • 1756IH16ISOE

Dimensions For 1756-IH16ISOE

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-IH16ISOE

Resolutions For 1756-IH16ISOE

About

Technical Specifications for 1756-IH16ISOE

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-IH16ISOE
SeriesControlLogix
Module TypeDigital Isolated Input Module Series of Events
Inputs16 Individually Isolated; SOE
Input Voltage125 Volts DC Sink-Source
Operating Voltage Range90-140 Volts DC
Input Delay Time75 microseconds plus selected filter time
Minimum Operating Current1.15 milliamps at 90 Volts DC
Maximum Operating Current1.85 milliamps at 140 Volts DC
Maximum Input Current, Off-State0.3 milliamps
Power Dissipation (Max)5.5 Watts at 60 degrees Celsius
Backplane Current at 5 Volts275 milliamps
Backplane Current at 24 Volts2 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-IH16ISOE
SeriesControlLogix
Module TypeDigital Isolated Input Module Series of Events
Inputs16 Individually Isolated; SOE
Input Voltage125 Volts DC Sink-Source
Operating Voltage Range90-140 Volts DC
Input Delay Time75 microseconds plus selected filter time
Minimum Operating Current1.15 milliamps at 90 Volts DC
Maximum Operating Current1.85 milliamps at 140 Volts DC
Maximum Input Current, Off-State0.3 milliamps
Power Dissipation (Max)5.5 Watts at 60 degrees Celsius
Backplane Current at 5 Volts275 milliamps
Backplane Current at 24 Volts2 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H

About 1756-IH16ISOE

The Allen-Bradley 1756-IH16ISOE is a sequence of events module. It has 16 individually isolated inputs available and is compatible with the ControlLogix system. Before it can be connected to the 1756 ControlLogix chassis, it requires either the 1756-TBCH or 1756-TBS6H removable terminal block housing, or RTB. Features of the 1756-IH16ISOE DC sink/source digital input module include per point isolation, FIFO mode operation, and per point timestamping. This module also supports a change of state, although it uses the Enable CST Capture feature. The on-state operating voltage range of the 1756-IH16ISOE is 90 to 140 Volts DC, with a nominal input voltage of 125 Volts DC and this is the same as its sink/source voltage category. Its current draw at 5.1 Volts is 275 milliamps and 2 milliamps at 24 Volts. The module has a total backplane power of 1.3 Watts, thermal dissipation of 17.22 BTU/hour, and a maximum power dissipation of 5.5 Watts at 60 Degrees Celsius. While in off-state, it has a maximum current of 0.3 milliamps and a maximum voltage of 20 Volts. The module's current while in on-state ranges from 1.15 milliamps at 90 Volts DC to 1.85 milliamps at 140 Volts DC. It has an isolation of 250 Volts continuous between inputs. Similar to other modules, the 1756-IH16ISOE has a screw to backplane input delay time.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your ControlLogix 1756-IH16ISOE. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our highly skilled technicians can repair your ControlLogix 1756-IH16ISOE. All our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Revisions

Please refer to the manual for more information about the 1756-IH16ISOE such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-IH16ISOE Ser A
1756-IH16ISOE/A, Series A, Rev A Request Quote

Common misspellings:
  • l756-IH16ISOE
  • 1756-IHl6ISOE
  • 1756-IH16IS0E
  • 1756IH16ISOE
PDF