Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley ControlLogix 1756-IM16IK

Product image is representative; revision or series may vary. Contact us to request a specific version.

1756-IM16IK

|
Need a Specific Revision?

Allen Bradley ControlLogix Isolated Digital Input Module with 16 Individually Isolated Inputs Inputs

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1756-IM16IK

ManufacturerAllen Bradley
CategoryPLCs
Product LineControlLogix
Part Number1756-IM16IK
Weight0.75 lbs (0.34 kg)
Module TypeIsolated Digital Input Module
Inputs16 Individually Isolated Inputs
Input Voltage240 Volts AC
Operating Voltage Range159-265 Volts AC
Input Delay TimeProgrammable 9 or 18 milliseconds
Minimum Operating Current5 milliamperes at 159 Volts AC, 60 Hertz
Maximum Operating Current13 milliamperes at 265 Volts AC, 60 Hertz
Maximum Input Current, Off-State2.5 milliamperes
Power Dissipation (Max)5.8 Watts at 60 degrees Celsius
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
View as PDF
Request a Repair

This 1756-IM16IK isolated digital input module from Allen Bradley comes with 16 individually isolated inputs. The input voltage used is 240 Volts AC whereas the operating voltage range of this device goes between 159 and 265 Volts AC. The input delay time for this unit can be programmed to be 9 or 18 milliseconds. Its minimum operating current is 5 mA at 159 Volts AC, 60 Hertz, the maximum operating current being 13 mA at 265 Volts, 60 Hertz. The maximum input current Off state for this device peaks at 2.5 mA.

This isolated digital input module has a power dissipation capacity of maximum 5.8 Watts at 60 degrees Celsius. The backplane current at 5 Volts is 100 mA; at 24 Volts, it is 3 mA. This module’s conformal coat protects the internal circuitry from dust, pollution, moisture and temperature extremes as well.

The 1756-IM16IK allows a user to easily configure and monitor digital and analog data of any connected HART device from a remote location; the data displayed for any given channel is prominently visible from a single location.

This device is equipped with HART 5, 6 or 7 read/write capabilities.

Revision Part #Also known as
1756-IM16IK Ser A1756-IM16IK/A, Series A, Rev A
Don't see your particular revision? Contact us now.