DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1756-L84EP module is a controller module for Allen-Bradley ControlLogix 5580 systems. It comes with 20 megabytes of user memory.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 1756-L84EP. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | ControlLogix |
Part Number | 1756-L84EP |
Product Type | Controller |
Compatibility | ControlLogix 5580 |
Ethernet Speeds | 10/100/1000 Mbps |
USB Speed | 12 Mbps |
User Memory | 20 Megabytes |
Maximum Total I/O | 128,000 |
Maximum Digital I/O | 128,000 |
Maximum Analog I/O | 4000 |
Power Dissipation | 6.2 Watts |
Thermal Dissipation | 21.2 BTU per hour |
Brand | Allen-Bradley / Rockwell Automation |
Series | ControlLogix |
Part Number | 1756-L84EP |
Product Type | Controller |
Compatibility | ControlLogix 5580 |
Ethernet Speeds | 10/100/1000 Mbps |
USB Speed | 12 Mbps |
User Memory | 20 Megabytes |
Maximum Total I/O | 128,000 |
Maximum Digital I/O | 128,000 |
Maximum Analog I/O | 4000 |
Power Dissipation | 6.2 Watts |
Thermal Dissipation | 21.2 BTU per hour |
The 1756-L84EP module is a controller module which is designed by Allen-Bradley for its ControlLogix 5580 systems. It supports 20 Megabytes of user memory and a total of 128,000 I/O. The maximum numbers of digital and analog I/O supported by the controller are 128,000 and 4000, respectively. An SD card with a 2-gigabyte capacity ships with the controller and it can be used as additional non-volatile memory. At 1.2 Volts DC, the 1756-L84EP draws 5.0 milliamps of current, and at 5.1 Volts DC, the controller draws 1.20 Amps of current. The power dissipation of an operational controller is 6.2 Watts and the thermal dissipation of an operational controller is 21.2 BTU per hour. The controller can be used with standard and redundant power supply modules. The rated isolation on the controller is 50 Volts continuous from the USB to the system backplane and from the Ethernet port to the system backplane.
The Ethernet port to USB port isolation on the 1756-L84EP controller module has been tested at 1000 Volts for 60 seconds. The enclosure of the 1756-L84EP module is open and it weighs approximately 0.394 kilograms. The recommended wire category for the USB port is 3 and the recommended wire category for the Ethernet port is 2. The USB 2.0 port supports 12 Mbps of data transfer speed and it can be used for the programming and configuration of the controller. The 1756-L84EP module can be installed in any slot of the system chassis. The ATEX temperature code rating of the 1756-L84EP module is T4.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1756-L84EP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | ControlLogix |
Part Number | 1756-L84EP |
Product Type | Controller |
Compatibility | ControlLogix 5580 |
Ethernet Speeds | 10/100/1000 Mbps |
USB Speed | 12 Mbps |
User Memory | 20 Megabytes |
Maximum Total I/O | 128,000 |
Maximum Digital I/O | 128,000 |
Maximum Analog I/O | 4000 |
Power Dissipation | 6.2 Watts |
Thermal Dissipation | 21.2 BTU per hour |
Brand | Allen-Bradley / Rockwell Automation |
Series | ControlLogix |
Part Number | 1756-L84EP |
Product Type | Controller |
Compatibility | ControlLogix 5580 |
Ethernet Speeds | 10/100/1000 Mbps |
USB Speed | 12 Mbps |
User Memory | 20 Megabytes |
Maximum Total I/O | 128,000 |
Maximum Digital I/O | 128,000 |
Maximum Analog I/O | 4000 |
Power Dissipation | 6.2 Watts |
Thermal Dissipation | 21.2 BTU per hour |
The 1756-L84EP module is a controller module which is designed by Allen-Bradley for its ControlLogix 5580 systems. It supports 20 Megabytes of user memory and a total of 128,000 I/O. The maximum numbers of digital and analog I/O supported by the controller are 128,000 and 4000, respectively. An SD card with a 2-gigabyte capacity ships with the controller and it can be used as additional non-volatile memory. At 1.2 Volts DC, the 1756-L84EP draws 5.0 milliamps of current, and at 5.1 Volts DC, the controller draws 1.20 Amps of current. The power dissipation of an operational controller is 6.2 Watts and the thermal dissipation of an operational controller is 21.2 BTU per hour. The controller can be used with standard and redundant power supply modules. The rated isolation on the controller is 50 Volts continuous from the USB to the system backplane and from the Ethernet port to the system backplane.
The Ethernet port to USB port isolation on the 1756-L84EP controller module has been tested at 1000 Volts for 60 seconds. The enclosure of the 1756-L84EP module is open and it weighs approximately 0.394 kilograms. The recommended wire category for the USB port is 3 and the recommended wire category for the Ethernet port is 2. The USB 2.0 port supports 12 Mbps of data transfer speed and it can be used for the programming and configuration of the controller. The 1756-L84EP module can be installed in any slot of the system chassis. The ATEX temperature code rating of the 1756-L84EP module is T4.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1756-L84EP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 1756-L84EP. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.