1756-OF8IHK

Rated 3.7 with 24 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-OF8IHK

Revisions: Ser A 
Description: The Allen-Bradley 1756-OF8IHK is a ControlLogix HART I/O Module with +/- 24 Volts DC Overvoltage Protection, 15 Bits Across 24 Miliamperes, a Conformal Coat, 8 Isolated Differential Outputs and 1 HART Modem Per Channel.
Available Now
Request a quote for 1756-OF8IHK

Description: The Allen-Bradley 1756-OF8IHK is a ControlLogix HART I/O Module with +/- 24 Volts DC Overvoltage Protection, 15 Bits Across 24 Miliamperes, a Conformal Coat, 8 Isolated Differential Outputs and 1 HART Modem Per Channel.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-OF8IHK.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 3.7 with 24 reviews

    Technical Specifications for 1756-OF8IHK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IHK
SeriesControlLogix
Module TypeControlLogix HART I/O Module
Channels8 Isolated Differential Outputs and 1 HART Modem Per Channel
Input Current Range0-20 Miliamperes, 4-20 Miliamperes
Overvoltage Protection+/- 24 Volts DC
Resolution15 Bits Across 24 Miliamperes
Module HART Scan Time1 s w/ HART Enabled (Estimate)
Enclosure TypeNone (Open-Style)
CoatingConformal Coat
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IHK
SeriesControlLogix
Module TypeControlLogix HART I/O Module
Channels8 Isolated Differential Outputs and 1 HART Modem Per Channel
Input Current Range0-20 Miliamperes, 4-20 Miliamperes
Overvoltage Protection+/- 24 Volts DC
Resolution15 Bits Across 24 Miliamperes
Module HART Scan Time1 s w/ HART Enabled (Estimate)
Enclosure TypeNone (Open-Style)
CoatingConformal Coat
s

About 1756-OF8IHK

The Allen-Bradley 1756-OF8IHK is a ControlLogix HART I/O Module. This module is tested for its durability by an ASTM B845-97 Method G accelerated test environment, 20-day exposure, and by IEC 60068-2-60 Test Method 2 accelerated test environment, 20-day exposure. The 1756-OF8IHK is supported by DTM together with the C-UL-us, CE, RCM, Ex, KC, EAC certifications.





The 1756-OF8IHK operates in DC input voltage with a rating of +/- 24 Volts DC with overvoltage protection. Also, it can run on 250V AC isolation voltage with 15% rate at 4-20A. It has a 15 Bits across 24 Miliamperes resolution rating and 8 isolated differential outputs and 1 HART modem per channel with a module HART scan time of 1 s w/ HART-enabled (estimate). The amperage input range varies from 0-20 Milliamps and 4-20 Milliamps. It is also compatible with HART 6 and 7.





The 1756-OF8IHK’s enclosure type is open-style with a conformal coating. The conformal-coated analog output HART isolated current has 8 Pts (36 Pins).





The Allen-Bradley 1756-OF8IHK ControlLogix HART I/O Module provides chassis-based modules to support a variety of digital, diagnostic digital, analog, motion control, and specialty I/O for meeting all application needs. The 1756-OF8IHK can be used for any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis that is linked to a ControlLogix controller across the ControlNet or the EtherNet/IP networks.





The 1756-OF8IHK requires either a removable terminal block or a Bulletin 1492 wiring interface module for connecting all the field-side wiring.



Repair Services for 1756-OF8IHK

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-OF8IHK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1756-OF8IHK

Please refer to the manual for more information about the 1756-OF8IHK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-OF8IHK Ser A
1756-OF8IHK/A, Series A, Rev A Request Quote
Common misspellings:
  • l756-OF8IHK
  • 1756-0F8IHK
  • 1756-OFbIHK
  • 1756OF8IHK

Dimensions For 1756-OF8IHK

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-OF8IHK

Resolutions For 1756-OF8IHK

About

Technical Specifications for 1756-OF8IHK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IHK
SeriesControlLogix
Module TypeControlLogix HART I/O Module
Channels8 Isolated Differential Outputs and 1 HART Modem Per Channel
Input Current Range0-20 Miliamperes, 4-20 Miliamperes
Overvoltage Protection+/- 24 Volts DC
Resolution15 Bits Across 24 Miliamperes
Module HART Scan Time1 s w/ HART Enabled (Estimate)
Enclosure TypeNone (Open-Style)
CoatingConformal Coat
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OF8IHK
SeriesControlLogix
Module TypeControlLogix HART I/O Module
Channels8 Isolated Differential Outputs and 1 HART Modem Per Channel
Input Current Range0-20 Miliamperes, 4-20 Miliamperes
Overvoltage Protection+/- 24 Volts DC
Resolution15 Bits Across 24 Miliamperes
Module HART Scan Time1 s w/ HART Enabled (Estimate)
Enclosure TypeNone (Open-Style)
CoatingConformal Coat

About 1756-OF8IHK

The Allen-Bradley 1756-OF8IHK is a ControlLogix HART I/O Module. This module is tested for its durability by an ASTM B845-97 Method G accelerated test environment, 20-day exposure, and by IEC 60068-2-60 Test Method 2 accelerated test environment, 20-day exposure. The 1756-OF8IHK is supported by DTM together with the C-UL-us, CE, RCM, Ex, KC, EAC certifications.





The 1756-OF8IHK operates in DC input voltage with a rating of +/- 24 Volts DC with overvoltage protection. Also, it can run on 250V AC isolation voltage with 15% rate at 4-20A. It has a 15 Bits across 24 Miliamperes resolution rating and 8 isolated differential outputs and 1 HART modem per channel with a module HART scan time of 1 s w/ HART-enabled (estimate). The amperage input range varies from 0-20 Milliamps and 4-20 Milliamps. It is also compatible with HART 6 and 7.





The 1756-OF8IHK’s enclosure type is open-style with a conformal coating. The conformal-coated analog output HART isolated current has 8 Pts (36 Pins).





The Allen-Bradley 1756-OF8IHK ControlLogix HART I/O Module provides chassis-based modules to support a variety of digital, diagnostic digital, analog, motion control, and specialty I/O for meeting all application needs. The 1756-OF8IHK can be used for any of the I/O modules in the local chassis of a ControlLogix controller or in a chassis that is linked to a ControlLogix controller across the ControlNet or the EtherNet/IP networks.





The 1756-OF8IHK requires either a removable terminal block or a Bulletin 1492 wiring interface module for connecting all the field-side wiring.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-OF8IHK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1756-OF8IHK. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1756-OF8IHK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-OF8IHK Ser A
1756-OF8IHK/A, Series A, Rev A Request Quote

Common misspellings:
  • l756-OF8IHK
  • 1756-0F8IHK
  • 1756-OFbIHK
  • 1756OF8IHK
PDF