1756-OW16IK | Allen Bradley PLC ControlLogix

1756-OW16IK

Rated 4.3 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-OW16IK

Revisions: Ser A 
Description: Allen Bradley ControlLogix Isolated Relay Output Module with 16-Point Individually Isolated Outputs
Available Now
Request a quote for 1756-OW16IK

Description:

Allen Bradley ControlLogix Isolated Relay Output Module with 16-Point Individually Isolated Outputs


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-OW16IK.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.3 with 9 reviews

    Technical Specifications for 1756-OW16IK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OW16IK
SeriesControlLogix
Module TypeIsolated Relay Output Module
Outputs16-Point Individually Isolated
Operating Voltage10-265 Volts AC, 5-150 Volts DC
Output Current2, 0.5, 0.25 Amps
ListingThis specification list has been compiled by DO Supply.
Maximum Output Delay Time10 milliseconds
Contact Output13 N.O.
Power Dissipation (Max)4.5 Watts at 60 Celsius
Backplane Current at 5 Volts150 milliamps
Backplane Current at 24 Volts150 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
Isolation Voltage50 Volts Continuous
EnclosureNone
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OW16IK
SeriesControlLogix
Module TypeIsolated Relay Output Module
Outputs16-Point Individually Isolated
Operating Voltage10-265 Volts AC, 5-150 Volts DC
Output Current2, 0.5, 0.25 Amps
Maximum Output Delay Time10 milliseconds
Contact Output13 N.O.
Power Dissipation (Max)4.5 Watts at 60 Celsius
Backplane Current at 5 Volts150 milliamps
Backplane Current at 24 Volts150 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
Isolation Voltage50 Volts Continuous
EnclosureNone
s

About 1756-OW16IK

The Allen-Bradley 1756-OW16IK module is a conformally-coated isolated contact module for Allen-Bradley ControlLogix 5580 programmable controllers. The 1756-OW16IK module has 16 normally open individually isolated outputs. The pilot duty is the C300/R150 pilot duty. The operating voltage ranges are from 5 to 125 Volts DC and 10 to 240 Volts AC. The output voltage range is load-dependent: at 1 Amp, the output voltage range is from 5 to 30 Volts DC, at 0.5 Amps, the output is 48 Volts DC, at 0.22 Amps, the output is 125 Volts DC, at 1.5 Amps, the output is 120 Volts AC (at 50 to 60 Hertz), and at 0.75 Amps, the output voltage is 240 Volts AC (at 50 to 60 Hertz). 



The current draw of the 1756-OW16IK module at both 5.1 Volts and 24 Volts is 150 milliamps. The power draw from the chassis backplane is 4.4 Watts and the peak power dissipation is 4.5 Watts. The module thermal dissipation is 15.35 BTU per hour. The minimum load current per point is 10 milliamps. The initial contact resistance is 100 milliohms at 6 Volts and 1 Amp. The expected contact life is 300 kilohertz resistive and 100 kilohertz inductive. The 1756-OW16IK module can be used with removable terminal blocks, including the 1756-TBCH and 1756-TBS6H removable terminal blocks. One slot in the rack is required for module installation. The operating temperature range for the 1756-OW16IK module is from 0 to 60 degrees Celsius. The continuous isolation voltage rating is 250 Volts. The module can be installed when the chassis power is applied. However, it is not advisable to do so because an electric arc can occur during the module insertion or removal process which could lead to explosions in hazardous locations.



Repair Services for 1756-OW16IK

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Conformal Coat

Revisions for 1756-OW16IK

Please refer to the manual for more information about the 1756-OW16IK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-OW16IK Ser A
1756-OW16IK/A, Series A, Rev A Request Quote
Common misspellings:
  • l756-OW16IK
  • 1756-0W16IK
  • 1756-OWl6IK
  • 1756OW16IK

Dimensions For 1756-OW16IK

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-OW16IK

Resolutions For 1756-OW16IK

About

Technical Specifications for 1756-OW16IK

ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OW16IK
SeriesControlLogix
Module TypeIsolated Relay Output Module
Outputs16-Point Individually Isolated
Operating Voltage10-265 Volts AC, 5-150 Volts DC
Output Current2, 0.5, 0.25 Amps
Maximum Output Delay Time10 milliseconds
Contact Output13 N.O.
Power Dissipation (Max)4.5 Watts at 60 Celsius
Backplane Current at 5 Volts150 milliamps
Backplane Current at 24 Volts150 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
Isolation Voltage50 Volts Continuous
EnclosureNone
ManufacturerRockwell Automation
BrandAllen-Bradley
Part Number/Catalog No.1756-OW16IK
SeriesControlLogix
Module TypeIsolated Relay Output Module
Outputs16-Point Individually Isolated
Operating Voltage10-265 Volts AC, 5-150 Volts DC
Output Current2, 0.5, 0.25 Amps
Maximum Output Delay Time10 milliseconds
Contact Output13 N.O.
Power Dissipation (Max)4.5 Watts at 60 Celsius
Backplane Current at 5 Volts150 milliamps
Backplane Current at 24 Volts150 milliamps
Removeable Terminal Block(s)1756-TBCH, 1756-TBS6H
Isolation Voltage50 Volts Continuous
EnclosureNone

About 1756-OW16IK

The Allen-Bradley 1756-OW16IK module is a conformally-coated isolated contact module for Allen-Bradley ControlLogix 5580 programmable controllers. The 1756-OW16IK module has 16 normally open individually isolated outputs. The pilot duty is the C300/R150 pilot duty. The operating voltage ranges are from 5 to 125 Volts DC and 10 to 240 Volts AC. The output voltage range is load-dependent: at 1 Amp, the output voltage range is from 5 to 30 Volts DC, at 0.5 Amps, the output is 48 Volts DC, at 0.22 Amps, the output is 125 Volts DC, at 1.5 Amps, the output is 120 Volts AC (at 50 to 60 Hertz), and at 0.75 Amps, the output voltage is 240 Volts AC (at 50 to 60 Hertz). 



The current draw of the 1756-OW16IK module at both 5.1 Volts and 24 Volts is 150 milliamps. The power draw from the chassis backplane is 4.4 Watts and the peak power dissipation is 4.5 Watts. The module thermal dissipation is 15.35 BTU per hour. The minimum load current per point is 10 milliamps. The initial contact resistance is 100 milliohms at 6 Volts and 1 Amp. The expected contact life is 300 kilohertz resistive and 100 kilohertz inductive. The 1756-OW16IK module can be used with removable terminal blocks, including the 1756-TBCH and 1756-TBS6H removable terminal blocks. One slot in the rack is required for module installation. The operating temperature range for the 1756-OW16IK module is from 0 to 60 degrees Celsius. The continuous isolation voltage rating is 250 Volts. The module can be installed when the chassis power is applied. However, it is not advisable to do so because an electric arc can occur during the module insertion or removal process which could lead to explosions in hazardous locations.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Conformal Coat
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Conformal Coat
Revisions

Please refer to the manual for more information about the 1756-OW16IK such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-OW16IK Ser A
1756-OW16IK/A, Series A, Rev A Request Quote

Common misspellings:
  • l756-OW16IK
  • 1756-0W16IK
  • 1756-OWl6IK
  • 1756OW16IK
PDF