Product image is representative; revision or series may vary. Contact us to request a specific version.
Allen Bradley ControlLogix Redundant AC Power Supply Module with 120-240 Volts AC Input Voltage
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
| Manufacturer | Allen Bradley |
|---|---|
| Category | PLCs |
| Product Line | ControlLogix |
| Part Number | 1756-PAXTR |
| Weight | 10.00 lbs (4.54 kg) |
| Module Type | Redundant AC Power Supply Module |
| Input Voltage | 120-240 Volts AC |
| Voltage Range | 85-265 Volts AC |
| Input Frequency | 47-63 Hertz |
| Input Power | 65 Watts |
| Isolation Voltage | 250 Volts Continuous |
| Operating Temperature | 32-140 Fahrenheit (0-60 Celsius) |
| Enclosure | None |
The 1756-PAXTR Allen-Bradley ControlLogix-XT Redundant Power Supply is a redundant AC power supply that can be mixed or matched when used simultaneously with another power supply. The 1756-PAXTR has a power input of 120-240V AC. The relative humidity of the 1756-PAXTR is 5-95% noncondensing. The operational vibration of this power supply is 2 G at 10-500 Hz. The operating shock and the nonoperating shock of this power supply are 30 G and 50 G respectively. The Allen-Bradley 1756-PAXTR has an operating temperature of -25-70 °C (13-158 °F). The nonoperating temperature of this controller is -40-85 °C (-40-185 °F). The maximum altitude this controller can operate at is 2000 m (6560 ft). The surge transient immunity of the 1756-PAXTR is ± 1 kV line-line (DM) and ± 2 kV line earth (CM) on signal ports. The Conducted RF immunity of this power supply is 10 Vrms with 1 kHz sine-wave 80% AM from 150 kHz to 80 MHz. The Allen-Bradley 1756-PAXTR can be installed in ATEX / IECEx Zone 2 certified enclosures with a minimum IP54 entry minimum rating (as defined in the EN / IEC 60529). The 1756-PAXTR is designed for an environment with a Pollution Degree 2 rating (as defined in the EN / IEC0664-1) when applied in a Zone 2 environment. The enclosure should be accessible only with an appliance. Do not disconnect any equipment unless the power has been shut off or the area is known to be safe.
| Revision Part # | Also known as | |
|---|---|---|
| 1756-PAXTR Ser A | 1756-PAXTR/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||