1756-WS - In Stock | Allen Bradley PLC ControlLogix

1756-WS

Rated 4.8 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1756-WS

Revisions: Ser A Ser B Ser C 
Description: The 1756-WS module is a weigh scale module from Hardy Solutions which is designed to be installed into the Allen-Bradley ControlLogix PLC chassis. The 1756-WS modle is a single weigh scale module and it reads diagnostic data and weight from a set of strain gauge sensors or load cells and transfers this data over the chassis backplane to the ControlLogix processor.
In Stock Ships Today
Request a quote for 1756-WS

Description:

The 1756-WS module is a weigh scale module from Hardy Solutions which is designed to be installed into the Allen-Bradley ControlLogix PLC chassis. The 1756-WS modle is a single weigh scale module and it reads diagnostic data and weight from a set of strain gauge sensors or load cells and transfers this data over the chassis backplane to the ControlLogix processor.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: Ser A Ser B Ser C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1756-WS.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 12 reviews

    Technical Specifications for 1756-WS

BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-WS
Product typeWeigh scale module
CompatibilityAllen Bradley ControlLogix
Power requirement5 to 24 Volts DC
ModesGross, net, rate-of-change
Weight1.1 pounds
Output5 Volts DC
Input-0.3 to +15.3 millivolts
Operating temperature0 to 60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-WS
Product typeWeigh scale module
CompatibilityAllen Bradley ControlLogix
Power requirement5 to 24 Volts DC
ModesGross, net, rate-of-change
Weight1.1 pounds
Output5 Volts DC
Input-0.3 to +15.3 millivolts
Operating temperature0 to 60 degrees Celsius
s

About 1756-WS

The 1756-WS weigh scale module is made by Hardy Solutions and designed to be installed in the Allen-Bradley ControlLogix PLC chassis. The 1756-WS scale module is a single weigh scale module and it reads the diagnostic data and weight from a set of strain gauge sensors or load cells and it transfers this data over the chassis backplane to the central ControlLogix processor. The 1756-WS module digitizes and conditions the weight signals and transmits the gross weight, net weight, or data about the rate of change to the processor. The 1756-WS module supplies 5 Volts DC voltage to a maximum of four 350 Ohm load cells or load sensors which are associated with a single weight scale.



 



The power requirements of the 1756-WS module are 5 Volts DC or 24 Volts DC. The current drawn from the backplane is less than 1 Amp at 5 Volts DC and less than 0.0125 Amps at 24 Volts DC. The signal input on the 1756-WS module can accept -0.3 millivolts to +15.3 millivolts and sense 5 Volts DC. The module output can deliver 5 to 8.75 Volts DC. The common mode rejection of the module is 100 dB at or below 60 Hertz. The internal resolution of the module is 1:8,388,608. The conversion rate supported by the 1756-WS module is 50 updates per second. The 1756-WS module weighs 1.1 pounds. The environmental specifications include a 0 to 60 degrees Celsius operating temperature range and a -40 to 85 degrees Celsius storage temperature range. The module supports electronic (C2) calibration and traditional calibration with test weights. Status LEDs for module status and scale functional data are provided on the front panel.



Repair Services for 1756-WS

Type Lead Time Price Action
Repair Service 2-4 weeks $1179cartAdd to Cart

Our highly skilled technicians can repair your 1756-WS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for 1756-WS

Please refer to the manual for more information about the 1756-WS such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-WS Ser A
1756-WS/A, Series A, Rev A Request Quote
1756-WS Ser B
1756-WS/B, Series B, Rev B Request Quote
1756-WS Ser C
1756-WS/C, Series C, Rev C Request Quote
Common misspellings:
  • l756-WS
  • 1756WS

Dimensions For 1756-WS

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1756-WS

Resolutions For 1756-WS

About

Technical Specifications for 1756-WS

BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-WS
Product typeWeigh scale module
CompatibilityAllen Bradley ControlLogix
Power requirement5 to 24 Volts DC
ModesGross, net, rate-of-change
Weight1.1 pounds
Output5 Volts DC
Input-0.3 to +15.3 millivolts
Operating temperature0 to 60 degrees Celsius
BrandAllen-Bradley / Rockwell Automation
SeriesControlLogix
Part Number1756-WS
Product typeWeigh scale module
CompatibilityAllen Bradley ControlLogix
Power requirement5 to 24 Volts DC
ModesGross, net, rate-of-change
Weight1.1 pounds
Output5 Volts DC
Input-0.3 to +15.3 millivolts
Operating temperature0 to 60 degrees Celsius

About 1756-WS

The 1756-WS weigh scale module is made by Hardy Solutions and designed to be installed in the Allen-Bradley ControlLogix PLC chassis. The 1756-WS scale module is a single weigh scale module and it reads the diagnostic data and weight from a set of strain gauge sensors or load cells and it transfers this data over the chassis backplane to the central ControlLogix processor. The 1756-WS module digitizes and conditions the weight signals and transmits the gross weight, net weight, or data about the rate of change to the processor. The 1756-WS module supplies 5 Volts DC voltage to a maximum of four 350 Ohm load cells or load sensors which are associated with a single weight scale.



 



The power requirements of the 1756-WS module are 5 Volts DC or 24 Volts DC. The current drawn from the backplane is less than 1 Amp at 5 Volts DC and less than 0.0125 Amps at 24 Volts DC. The signal input on the 1756-WS module can accept -0.3 millivolts to +15.3 millivolts and sense 5 Volts DC. The module output can deliver 5 to 8.75 Volts DC. The common mode rejection of the module is 100 dB at or below 60 Hertz. The internal resolution of the module is 1:8,388,608. The conversion rate supported by the 1756-WS module is 50 updates per second. The 1756-WS module weighs 1.1 pounds. The environmental specifications include a 0 to 60 degrees Celsius operating temperature range and a -40 to 85 degrees Celsius storage temperature range. The module supports electronic (C2) calibration and traditional calibration with test weights. Status LEDs for module status and scale functional data are provided on the front panel.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $1179cartAdd to Cart

Our highly skilled technicians can repair your 1756-WS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $1179cartAdd to Cart

Our highly skilled technicians can repair your 1756-WS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the 1756-WS such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
1756-WS Ser A
1756-WS/A, Series A, Rev A Request Quote
1756-WS Ser B
1756-WS/B, Series B, Rev B Request Quote
1756-WS Ser C
1756-WS/C, Series C, Rev C Request Quote

Common misspellings:
  • l756-WS
  • 1756WS
PDF