DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley and Helm HM-1756-WM module is a strain gage input module with high resolution. It has 2 isolated strain gage inputs. This input module is a ControlLogix input module.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the HM-1756-WM. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | ControlLogix |
Part Number | HM-1756-WM |
Product Type | Strain Gage Input Module |
High Resolution | Yes |
Number of Inputs | 2 |
Backplane Power Consumption | 24 Volts at 84.99 milliamps, 5 Volts at 40 milliamps |
Module Update Time | 1 millisecond |
Operating Temperature | 32 to 140 degrees Fahrenheit |
Module Class | Class 1 |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | ControlLogix |
Part Number | HM-1756-WM |
Product Type | Strain Gage Input Module |
High Resolution | Yes |
Number of Inputs | 2 |
Backplane Power Consumption | 24 Volts at 84.99 milliamps, 5 Volts at 40 milliamps |
Module Update Time | 1 millisecond |
Operating Temperature | 32 to 140 degrees Fahrenheit |
Module Class | Class 1 |
The HM-1756-WM module is a high resolution type of strain gage input module. It has been manufactured by Allen-Bradley and Helm as a ControlLogix device. The HM-1756-WM strain gage input module is a solid-state module that can be installed in just 1 slot in a compatible chassis. It is also a Class 1 type of input module that uses 8 input words as well as 8 output words. The HM-1756-WM strain gage input module accepts up to 2 channels of strain gage input, or 2 gages that are each rated at 700 Ohms can be connected to 1 channel in parallel. This input module is configured manually and through a user programmable setup process. It has an image table where it stores its digitally converted analog data.
The Allen-Bradley and Helm HM-1756-WM high resolution strain gage input module from the ControlLogix series draws its power from the backplane that it is installed in, and its backplane power consumption ratings are 24 Volts at 84.99 milliamps of current and 5 Volts at 40 milliamps of current. Both of the channels on the HM-1756-WM strain gage input module are isolated and the module update time is 1 millisecond. The isolation voltage rating of this input module is 500 Volts DC between the inputs and the chassis ground and between the input and the backplane. The ambient operating temperature range of the HM-1756-WM strain gage input module is 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your HM-1756-WM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | ControlLogix |
Part Number | HM-1756-WM |
Product Type | Strain Gage Input Module |
High Resolution | Yes |
Number of Inputs | 2 |
Backplane Power Consumption | 24 Volts at 84.99 milliamps, 5 Volts at 40 milliamps |
Module Update Time | 1 millisecond |
Operating Temperature | 32 to 140 degrees Fahrenheit |
Module Class | Class 1 |
Manufacturer | Allen-Bradley/Rockwell Automation |
Series | ControlLogix |
Part Number | HM-1756-WM |
Product Type | Strain Gage Input Module |
High Resolution | Yes |
Number of Inputs | 2 |
Backplane Power Consumption | 24 Volts at 84.99 milliamps, 5 Volts at 40 milliamps |
Module Update Time | 1 millisecond |
Operating Temperature | 32 to 140 degrees Fahrenheit |
Module Class | Class 1 |
The HM-1756-WM module is a high resolution type of strain gage input module. It has been manufactured by Allen-Bradley and Helm as a ControlLogix device. The HM-1756-WM strain gage input module is a solid-state module that can be installed in just 1 slot in a compatible chassis. It is also a Class 1 type of input module that uses 8 input words as well as 8 output words. The HM-1756-WM strain gage input module accepts up to 2 channels of strain gage input, or 2 gages that are each rated at 700 Ohms can be connected to 1 channel in parallel. This input module is configured manually and through a user programmable setup process. It has an image table where it stores its digitally converted analog data.
The Allen-Bradley and Helm HM-1756-WM high resolution strain gage input module from the ControlLogix series draws its power from the backplane that it is installed in, and its backplane power consumption ratings are 24 Volts at 84.99 milliamps of current and 5 Volts at 40 milliamps of current. Both of the channels on the HM-1756-WM strain gage input module are isolated and the module update time is 1 millisecond. The isolation voltage rating of this input module is 500 Volts DC between the inputs and the chassis ground and between the input and the backplane. The ambient operating temperature range of the HM-1756-WM strain gage input module is 0 to 60 degrees Celsius or 32 to 140 degrees Fahrenheit.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your HM-1756-WM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your HM-1756-WM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.