2706-PDNETM
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2706-PDNETM. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | DeviceNet Controllers |
Part Number | 2706-PDNETM |
Description | InView communication module |
Module | DeviceNet |
Enclosure | NEMA Type 12 |
Temperature | 0-50 degrees Celsius |
Standard | CE |
Waterproof enclosure | Yes |
Ports | DeviceNet and RS-232 |
Brand | Allen-Bradley / Rockwell Automation |
Series | DeviceNet Controllers |
Part Number | 2706-PDNETM |
Description | InView communication module |
Module | DeviceNet |
Enclosure | NEMA Type 12 |
Temperature | 0-50 degrees Celsius |
Standard | CE |
Waterproof enclosure | Yes |
Ports | DeviceNet and RS-232 |
The 2706-PDNETM module is a back-mounted communication module by Allen-Bradley. It is used with the InView 2706-P4X message display module variant. It is a DeviceNet communication module. The communication module is used for easy integration with the RS-232 and RS-485 ports on the InView message display unit. This DeviceNet module is an industrial communication module which communicates with the display unit by using controllers. The 2706-PDNETM module allows the display unit to communicate with the Allen-Bradley network. The temperature around the communication module should be kept between 0 and 50 degrees Celsius for regular operation. The module is ready for global use and it is certified with the CE mark.
The 2706-PDNETM module is also used to download messages and files and trigger updates for the display unit. During the installation process, the module is mounted in place and the mounting screws are tightened. Also, proper communication cables should be used and the wiring should be properly verified. The communication module is housed inside a NEMA Type 12 enclosure with a removable cover. The enclosure is fully waterproof. A cable runs through the enclosure which is connected to the terminal block of the display unit. The 2706-PDNETM module is equipped with a DeviceNet port and an RS-232 serial port. The DeviceNet port is used to connect to devices on a DeviceNet network and transfer applications over a DeviceNet network. The RS-232 port is used for triggering messages to the display unit.
The InView 2706-PDNETM is a communication module. It comes with a NEMA Type 12 enclosure.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2706-PDNETM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | DeviceNet Controllers |
Part Number | 2706-PDNETM |
Description | InView communication module |
Module | DeviceNet |
Enclosure | NEMA Type 12 |
Temperature | 0-50 degrees Celsius |
Standard | CE |
Waterproof enclosure | Yes |
Ports | DeviceNet and RS-232 |
Brand | Allen-Bradley / Rockwell Automation |
Series | DeviceNet Controllers |
Part Number | 2706-PDNETM |
Description | InView communication module |
Module | DeviceNet |
Enclosure | NEMA Type 12 |
Temperature | 0-50 degrees Celsius |
Standard | CE |
Waterproof enclosure | Yes |
Ports | DeviceNet and RS-232 |
The 2706-PDNETM module is a back-mounted communication module by Allen-Bradley. It is used with the InView 2706-P4X message display module variant. It is a DeviceNet communication module. The communication module is used for easy integration with the RS-232 and RS-485 ports on the InView message display unit. This DeviceNet module is an industrial communication module which communicates with the display unit by using controllers. The 2706-PDNETM module allows the display unit to communicate with the Allen-Bradley network. The temperature around the communication module should be kept between 0 and 50 degrees Celsius for regular operation. The module is ready for global use and it is certified with the CE mark.
The 2706-PDNETM module is also used to download messages and files and trigger updates for the display unit. During the installation process, the module is mounted in place and the mounting screws are tightened. Also, proper communication cables should be used and the wiring should be properly verified. The communication module is housed inside a NEMA Type 12 enclosure with a removable cover. The enclosure is fully waterproof. A cable runs through the enclosure which is connected to the terminal block of the display unit. The 2706-PDNETM module is equipped with a DeviceNet port and an RS-232 serial port. The DeviceNet port is used to connect to devices on a DeviceNet network and transfer applications over a DeviceNet network. The RS-232 port is used for triggering messages to the display unit.
The InView 2706-PDNETM is a communication module. It comes with a NEMA Type 12 enclosure.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2706-PDNETM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2706-PDNETM. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.