The 5094-AEN2SFPR Ethernet/IP adapter from Allen-Bradley comes from the Flex 5000 family. The adapter comes with a reduced footprint and it supports up to 16 modules using a single node. This Ethernet adapter is equipped with 2 SFP slots. The adapter is equipped with two RJ-45 ports for connections. The voltage and current ratings of the adapter are18 to 32 Volts DC and 1730 milliamps, respectively. It supports an isolation voltage of 300 Volts with its basic insulation. The adapter has been tested with a voltage of 2121 Volts AC for 60 seconds with power to the backplane, 4242 Volts DC for 60 seconds with power to Ethernet ports. There is no isolation between the communication ports. The 5094-AEN2SFPR adapter is equipped with four LED indicators to indicate different activities. The adapter can be mounted using a DIN Rail. It is compatible with zinc-plated and chromate-passivated steel DIN Rails.

The 5094-AEN2SFPR adapter comes with a screw-type removable terminal block. It supports the parallel redundancy protocol and it has device-level ring support for high availability in Ethernet networks. The adapter helps to enhance the communication with its 1 GB Ethernet/IP connectivity. It supports 16-point discrete input and output modules. The Ethernet/IP adapter is equipped with a rotary switch which are set to 999. The 5094-AEN2SFPR adapter is DHCP enabled, so the adapter should be configured to obtain an IP address via a DHCP server. The adapter is sensitive to electrostatic discharge which can damage the internal components of the Ethernet/IP adapter. The adapter is certified for use only with a surrounding air temperature between -40 and 70 degrees Celsius.