5094-AEN2TRXT | Allen Bradley PLC FLEX 5000

×

5094-AEN2TRXT

5094-AEN2TRXT

Description:

The 5094-AEN2TRXT is a FLEX 5000 EtherNet/IP Adapter with RJ45 Ports manufactured by Allen-Bradley which has Voltage and current ratings, MP of 18...32V DC, 1880 mA, Voltage and current ratings, MP inrush of 18...32V DC, 5700 mA for 100 ms, and Voltage and current ratings, backplane of 15V DC, 1800 mA. The Power dissipation, max for this module is 6.2 W @ 18V DC, and the Thermal dissipation, max is 21.1 BTU/hr @ 24V DC. The Isolation voltage for this model are 300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports .

Rated 4.7 with 6 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 5094-AEN2TRXT

Add more parts to quote

Description:

The 5094-AEN2TRXT is a FLEX 5000 EtherNet/IP Adapter with RJ45 Ports manufactured by Allen-Bradley which has Voltage and current ratings, MP of 18...32V DC, 1880 mA, Voltage and current ratings, MP inrush of 18...32V DC, 5700 mA for 100 ms, and Voltage and current ratings, backplane of 15V DC, 1800 mA. The Power dissipation, max for this module is 6.2 W @ 18V DC, and the Thermal dissipation, max is 21.1 BTU/hr @ 24V DC. The Isolation voltage for this model are 300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports .


About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-AEN2TRXT.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 6 reviews

    Technical Specifications for 5094-AEN2TRXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENSFPR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32V DC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1060 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.8 W @ 18V DC
Thermal dissipation, max19.8 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type. Tested @ 2121V AC for 60 s, Power to Backplane. Tested @ 4242V DC for 60s, Power to Ethernet ports. No isolation between communication ports.
Wiring category1 - on power ports and 1 - on Ethernet slots
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENSFPR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32V DC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1060 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.8 W @ 18V DC
Thermal dissipation, max19.8 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type. Tested @ 2121V AC for 60 s, Power to Backplane. Tested @ 4242V DC for 60s, Power to Ethernet ports. No isolation between communication ports.
Wiring category1 - on power ports and 1 - on Ethernet slots
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
s

About 5094-AEN2TRXT

The 5094-AEN2TRXT adapter is a Flex 5000 series Ethernet/IP adapter manufactured by Allen-Bradley. It comes with two RJ 45 ports. The isolation voltage rating of this adapter variant is 300 Volts continuous. The adapter has a basic insulation type which has been tested at 2121 Volts AC for 60 seconds. The power to backplane and backplane to Ethernet levels have been tested with 4242 Volts DC for 60 seconds. The 5094-AEN2TRXT adapter is equipped with four status indicators to report its operating status. These indicators are located on the front panel of the adapter. It has a maximum power dissipation of 6.2 Watts in the form of heat at 18 Volts DC. The maximum thermal dissipation of the adapter is 21.1 BTU per hour at 24 Volts DC.



 



The 5094-AEN2TRXT adapter is equipped with different system warning features. It can alert the operators for critical temperature levels, mismatched cables, and lost connections. The indicator blinks red to alert the operators. Module tags are created when the adapter is added to a controller project and the connection is set to the status. The adapter is equipped with a rotary switch which helps to reset it. To reset the adapter, it powers down and then the rotary switch is set to level 888 and then it is powered up again. The rotary switch should be set back to the previous address after the reset process. The 5094-AEN2TRXT adapter uses 2.5 millimeters 14 AWG cable rated at 105 degrees Celsius for single wire connections. The adapter uses copper wire. The adapter should not be exposed to EMC noise.



Repair Services for 5094-AEN2TRXT

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-AEN2TRXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.

Dimensions For 5094-AEN2TRXT

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-AEN2TRXT

Resolutions For 5094-AEN2TRXT

About

Technical Specifications for 5094-AEN2TRXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENSFPR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32V DC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1060 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.8 W @ 18V DC
Thermal dissipation, max19.8 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type. Tested @ 2121V AC for 60 s, Power to Backplane. Tested @ 4242V DC for 60s, Power to Ethernet ports. No isolation between communication ports.
Wiring category1 - on power ports and 1 - on Ethernet slots
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENSFPR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32V DC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1060 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.8 W @ 18V DC
Thermal dissipation, max19.8 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type. Tested @ 2121V AC for 60 s, Power to Backplane. Tested @ 4242V DC for 60s, Power to Ethernet ports. No isolation between communication ports.
Wiring category1 - on power ports and 1 - on Ethernet slots
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.

About 5094-AEN2TRXT

The 5094-AEN2TRXT adapter is a Flex 5000 series Ethernet/IP adapter manufactured by Allen-Bradley. It comes with two RJ 45 ports. The isolation voltage rating of this adapter variant is 300 Volts continuous. The adapter has a basic insulation type which has been tested at 2121 Volts AC for 60 seconds. The power to backplane and backplane to Ethernet levels have been tested with 4242 Volts DC for 60 seconds. The 5094-AEN2TRXT adapter is equipped with four status indicators to report its operating status. These indicators are located on the front panel of the adapter. It has a maximum power dissipation of 6.2 Watts in the form of heat at 18 Volts DC. The maximum thermal dissipation of the adapter is 21.1 BTU per hour at 24 Volts DC.



 



The 5094-AEN2TRXT adapter is equipped with different system warning features. It can alert the operators for critical temperature levels, mismatched cables, and lost connections. The indicator blinks red to alert the operators. Module tags are created when the adapter is added to a controller project and the connection is set to the status. The adapter is equipped with a rotary switch which helps to reset it. To reset the adapter, it powers down and then the rotary switch is set to level 888 and then it is powered up again. The rotary switch should be set back to the previous address after the reset process. The 5094-AEN2TRXT adapter uses 2.5 millimeters 14 AWG cable rated at 105 degrees Celsius for single wire connections. The adapter uses copper wire. The adapter should not be exposed to EMC noise.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-AEN2TRXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-AEN2TRXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
PDF
5094-AEN2TRXT PDF