Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley FLEX 5000 5094-AENSFPR

Product image is representative; revision or series may vary. Contact us to request a specific version.

5094-AENSFPR

|
Need a Specific Revision?

The Allen-Bradley 5094-AENSFPR Ethernet adapter module has been designed and manufactured as part of the Allen-Bradley/Rockwell Automation FLEX 5000 series. It can work with up to 8 FLEX 5000 input and output modules at a time. The 5094-AENSFPR Ethernet adapter module can support both copper and fiber media. It supports Ethernet communication speeds of up to 1 Gbps. The 5094-AENSFPR Ethernet adapter module also supports configurable power monitoring and the DLR, linear, and star topologies.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 5094-AENSFPR

ManufacturerAllen Bradley
CategoryPLCs
Product LineFLEX 5000
Part Number5094-AENSFPR
Weight0.38 lbs (0.17 kg)
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32V DC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1060 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.8 W @ 18V DC
Thermal dissipation, max19.8 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type. Tested @ 2121V AC for 60 s, Power to Backplane. Tested @ 4242V DC for 60s, Power to Ethernet ports. No isolation between communication ports.
Wiring category1 - on power ports and 1 - on Ethernet slots
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
Request a Repair

The 5094-AENSFPR adapter is an Allen-Bradley Ethernet/IP adapter. It is used in modern Allen-Bradley drives for data and information transfer. The Ethernet/IP network is an industrial network protocol which aligns with common industry protocols that are used in modern industries and factories. The Ethernet adapter is used with wired interfaces. The connection is made using the RS 45 port located in the adapter. It is part of the Flex 5000 series. It supports A voltage range between 18 and 32 Volts DC and it comes with a current rating of 1250 milliamps. The inrush current rating of the adapter is 3200 milliamps for 100 milliseconds. The 5094-AENSFPR adapter should be operated in a temperature range between -40 and 70 degrees Celsius. Also, the environment should be relatively humid with a maximum non-condensing humidity level of 95%. The adapter is certified with the CE, RCM, Ex, KC, and other standards.

The 5094-AENSFPR adapter can withstand 5 g vibrations in the range of 10 to 500 Hertz, and 30 g operating and non-operating shocks. The emissions from the adapter meet the IEC 61000-6-4 standards. The adapter facilitates high-speed data transfer between the Logix controller and other modules. The 5094-AENSFPR adapter dissipates 5.8 Watts of power with a 15 Volts DC voltage supply. The maximum thermal dissipation at 24 Volts DC is 19.8 BTU/hour. The isolation voltage of the adapter is 300 Volts and it is equipped with basic insulation. The adapter is equipped with a MOD PowerBus which is required to operate the adapter and the associated I/O module. No traces of EMC noise should be present in the installation environment.