5094-AENTRXT | Allen Bradley PLC FLEX 5000

5094-AENTRXT

5094-AENTRXT

Description: The 5094-AENTRXT Ethernet adapter is an Allen-Bradley Ethernet/IP adapter module from the FLEX 5000 product line. It can work with 8 I/O modules from the FLEX 5000 series at a time. The 5094-AENTRXT Ethernet adapter module allows the I/O modules that it works with to communicate at Ethernet speeds of 10 Mbps, 100 Mbps, or 1 Gbps. This Ethernet adapter module can operate with the Allen-Bradley 1606-XLP72E power supply module. The 5094-AENTRXT Ethernet adapter module can operate a temperature of up to 70 degrees Celsius.
Rated 4.5 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 5094-AENTRXT

Add more parts to quote

Description: The 5094-AENTRXT Ethernet adapter is an Allen-Bradley Ethernet/IP adapter module from the FLEX 5000 product line. It can work with 8 I/O modules from the FLEX 5000 series at a time. The 5094-AENTRXT Ethernet adapter module allows the I/O modules that it works with to communicate at Ethernet speeds of 10 Mbps, 100 Mbps, or 1 Gbps. This Ethernet adapter module can operate with the Allen-Bradley 1606-XLP72E power supply module. The 5094-AENTRXT Ethernet adapter module can operate a temperature of up to 70 degrees Celsius.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-AENTRXT.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 20 reviews

    Technical Specifications for 5094-AENTRXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AEN2TR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1880 mA
Voltage and current ratings, MP inrush18...32V DC, 5700 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1800 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max6.2 W @ 18V DC
Thermal dissipation, max21.1 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AEN2TR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1880 mA
Voltage and current ratings, MP inrush18...32V DC, 5700 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1800 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max6.2 W @ 18V DC
Thermal dissipation, max21.1 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
s

About 5094-AENTRXT

The 5094-AENTRXT adapter is an Allen-Bradley manufactured Ethernet/IP adapter. The adapter is used for internal communications. It can also be used to upload and download files and information over the network. The adapter is fully compatible with a variety of Allen-Bradley products. These adapters are equipped with RJ-45 ports. The adapter has a current rating of 1250 milliamps. It supports a voltage range between 18 and 32 Volts DC. The adapter is powered with a backplane current of 1130 milliamps. The recommended external overcurrent protection lies in between 10 and 12 Amps at 22.5 Volts DC. The 5094-AENTRXT adapter dissipates 5.1 Watts of power in the form of heat with a voltage rating of 18 Volts DC. The thermal dissipation of the adapter is 17.4 BTU per hour with a voltage rating of 24 Volts DC. The adapter can be mounted using a DIN Rail made up of zinc plate or chromate passivated steel. A separate removable terminal block is available with the Ethernet/IP adapter.



 



The 5094-AENTRXT adapter has a terminal block torque of the 0.4 N-m screw type. The functional earth terminal comes with a terminal block torque of 0.5 N-m. The adapter can be used within a temperature range of -40 and 70 degrees Celsius with a surrounding air temperature of 70 degrees Celsius. The environment should be relatively humid with a maximum rating of 95%, non-condensing. The 5094-AENTRXT adapter has a continuous isolation voltage rating of 300 Volts. It has basic insulation. The adapter uses a 14 AWG solid or stranded copper wire that is rated at 105 degrees Celsius.



Technical Description of 5094-AENTRXT

The 5094-AENTRXT is a FLEX 5000 EtherNet/IP Adapter with RJ45 Ports manufactured by Allen-Bradley which has Voltage and current ratings, MP of 18...32V DC, 1250 mA, Voltage and current ratings, MP inrush of 18...32VDC, 3200 mA for 100 ms, and Voltage and current ratings, backplane of 15V DC, 1130 mA. The Power dissipation, max for this module is 5.1 W @ 18V DC, and the Thermal dissipation, max is 17.4 BTU/hr @ 24V DC. The Isolation voltage of this model is 300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports .

Repair Services for 5094-AENTRXT

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-AENTRXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.

Dimensions For 5094-AENTRXT

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-AENTRXT

Resolutions For 5094-AENTRXT

About

Technical Specifications for 5094-AENTRXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AEN2TR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1880 mA
Voltage and current ratings, MP inrush18...32V DC, 5700 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1800 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max6.2 W @ 18V DC
Thermal dissipation, max21.1 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AEN2TR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1880 mA
Voltage and current ratings, MP inrush18...32V DC, 5700 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1800 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max6.2 W @ 18V DC
Thermal dissipation, max21.1 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.

About 5094-AENTRXT

The 5094-AENTRXT adapter is an Allen-Bradley manufactured Ethernet/IP adapter. The adapter is used for internal communications. It can also be used to upload and download files and information over the network. The adapter is fully compatible with a variety of Allen-Bradley products. These adapters are equipped with RJ-45 ports. The adapter has a current rating of 1250 milliamps. It supports a voltage range between 18 and 32 Volts DC. The adapter is powered with a backplane current of 1130 milliamps. The recommended external overcurrent protection lies in between 10 and 12 Amps at 22.5 Volts DC. The 5094-AENTRXT adapter dissipates 5.1 Watts of power in the form of heat with a voltage rating of 18 Volts DC. The thermal dissipation of the adapter is 17.4 BTU per hour with a voltage rating of 24 Volts DC. The adapter can be mounted using a DIN Rail made up of zinc plate or chromate passivated steel. A separate removable terminal block is available with the Ethernet/IP adapter.



 



The 5094-AENTRXT adapter has a terminal block torque of the 0.4 N-m screw type. The functional earth terminal comes with a terminal block torque of 0.5 N-m. The adapter can be used within a temperature range of -40 and 70 degrees Celsius with a surrounding air temperature of 70 degrees Celsius. The environment should be relatively humid with a maximum rating of 95%, non-condensing. The 5094-AENTRXT adapter has a continuous isolation voltage rating of 300 Volts. It has basic insulation. The adapter uses a 14 AWG solid or stranded copper wire that is rated at 105 degrees Celsius.



Technical Description of 5094-AENTRXT

The 5094-AENTRXT is a FLEX 5000 EtherNet/IP Adapter with RJ45 Ports manufactured by Allen-Bradley which has Voltage and current ratings, MP of 18...32V DC, 1250 mA, Voltage and current ratings, MP inrush of 18...32VDC, 3200 mA for 100 ms, and Voltage and current ratings, backplane of 15V DC, 1130 mA. The Power dissipation, max for this module is 5.1 W @ 18V DC, and the Thermal dissipation, max is 17.4 BTU/hr @ 24V DC. The Isolation voltage of this model is 300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports .

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-AENTRXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-AENTRXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
PDF