5094-CE10 | Allen Bradley PLC FLEX 5000

5094-CE10

5094-CE10

Description:

The Allen-Bradley/Rockwell Automation 5094-CE10 cable is a 5094 Series interconnect cable for FLEX 5000 I/O Modules. It has a maximum backplane power of 1.8 Amps at 15 Volts DC and a cable length of up to 1 meter (3.3 feet).

Rated 4.7 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 5094-CE10

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation 5094-CE10 cable is a 5094 Series interconnect cable for FLEX 5000 I/O Modules. It has a maximum backplane power of 1.8 Amps at 15 Volts DC and a cable length of up to 1 meter (3.3 feet).


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-CE10.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 7 reviews

    Technical Specifications for 5094-CE10

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-CE10
Maximum Backplane Power (BP)1.8 Amps at 15 Volts DC
Cable Length 1.0 meter (3.3 feet).
Corrosion Resistance ClassificationISA S71.04 G3
North American Temp code, ATEX and IECEX Temperature CodeT4
Maximum Surrounding Air Temperature70 degrees Celsius (158 degrees Fahrenheit)
Operating Temperature -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Storage Temperature -40 to 70 degrees Celsius (-40 to 185 degrees Fahrenheit)
Humidity 5 to 95%, non-condensing
Weight 497 grams (17.5 ounces)
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-CE10
Maximum Backplane Power (BP)1.8 Amps at 15 Volts DC
Cable Length 1.0 meter (3.3 feet).
Corrosion Resistance ClassificationISA S71.04 G3
North American Temp code, ATEX and IECEX Temperature CodeT4
Maximum Surrounding Air Temperature70 degrees Celsius (158 degrees Fahrenheit)
Operating Temperature -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Storage Temperature -40 to 70 degrees Celsius (-40 to 185 degrees Fahrenheit)
Humidity 5 to 95%, non-condensing
Weight 497 grams (17.5 ounces)
s

About 5094-CE10

The Allen-Bradley 5094-CE10 Interconnect Cable is an accessory in the 5094 subseries of the FLEX 5000 series of I/O modules. It provides a high-speed transfer of data over an Ethernet/IP network between a Logix 5000 controller and FLEX 5000 I/O modules. The interconnect cable offers system-side power that is intended for the FLEX 5000 input and output modules. The 5094-CE10 Interconnect Cable has a backplane power rating of 1.8 Amps at 15 Volts DC. The cable has conformed to international standards for operating temperatures such as the IEC 60068-2-1 standards for operating in cold environments, the IEC 60068-2-2 standards for operating in dry heat, and the IEC 60068-2-14 standards for operating with thermal shock. This interconnect cable's operating temperature ranges from -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit).



 



The Allen-Bradley 5094-CE10 Interconnect Cable should be used in surroundings with a pollution level that does not exceed a pollution rating of Pollution Degree 2. It meets the T4 standard for the IECEx temperature code, North American temperature code, and the ATEX temperature code. The cable has a corrosive resistance classification of ANSI/ISA S71.04 G3 and it has a conformal coating. It has a storage temperature range from -40 to 70 degrees Celsius (-40 to 185 degrees Fahrenheit) and a surrounding air temperature rating not exceeding 70 degrees Celsius (158 degrees Fahrenheit). The cable has a length up to 1 meter (3.3 feet) and an open-style enclosure type. The relative humidity ranges between 5 and 95%, non-condensing, and operating shock of 30 g. The Allen-Bradley 5094-CE10 Interconnect Cable has an approximate weight of 497 grams (17.5 ounces).



Repair Services for 5094-CE10

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-CE10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-CE10

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-CE10

Resolutions For 5094-CE10

About

Technical Specifications for 5094-CE10

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-CE10
Maximum Backplane Power (BP)1.8 Amps at 15 Volts DC
Cable Length 1.0 meter (3.3 feet).
Corrosion Resistance ClassificationISA S71.04 G3
North American Temp code, ATEX and IECEX Temperature CodeT4
Maximum Surrounding Air Temperature70 degrees Celsius (158 degrees Fahrenheit)
Operating Temperature -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Storage Temperature -40 to 70 degrees Celsius (-40 to 185 degrees Fahrenheit)
Humidity 5 to 95%, non-condensing
Weight 497 grams (17.5 ounces)
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-CE10
Maximum Backplane Power (BP)1.8 Amps at 15 Volts DC
Cable Length 1.0 meter (3.3 feet).
Corrosion Resistance ClassificationISA S71.04 G3
North American Temp code, ATEX and IECEX Temperature CodeT4
Maximum Surrounding Air Temperature70 degrees Celsius (158 degrees Fahrenheit)
Operating Temperature -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit)
Storage Temperature -40 to 70 degrees Celsius (-40 to 185 degrees Fahrenheit)
Humidity 5 to 95%, non-condensing
Weight 497 grams (17.5 ounces)

About 5094-CE10

The Allen-Bradley 5094-CE10 Interconnect Cable is an accessory in the 5094 subseries of the FLEX 5000 series of I/O modules. It provides a high-speed transfer of data over an Ethernet/IP network between a Logix 5000 controller and FLEX 5000 I/O modules. The interconnect cable offers system-side power that is intended for the FLEX 5000 input and output modules. The 5094-CE10 Interconnect Cable has a backplane power rating of 1.8 Amps at 15 Volts DC. The cable has conformed to international standards for operating temperatures such as the IEC 60068-2-1 standards for operating in cold environments, the IEC 60068-2-2 standards for operating in dry heat, and the IEC 60068-2-14 standards for operating with thermal shock. This interconnect cable's operating temperature ranges from -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit).



 



The Allen-Bradley 5094-CE10 Interconnect Cable should be used in surroundings with a pollution level that does not exceed a pollution rating of Pollution Degree 2. It meets the T4 standard for the IECEx temperature code, North American temperature code, and the ATEX temperature code. The cable has a corrosive resistance classification of ANSI/ISA S71.04 G3 and it has a conformal coating. It has a storage temperature range from -40 to 70 degrees Celsius (-40 to 185 degrees Fahrenheit) and a surrounding air temperature rating not exceeding 70 degrees Celsius (158 degrees Fahrenheit). The cable has a length up to 1 meter (3.3 feet) and an open-style enclosure type. The relative humidity ranges between 5 and 95%, non-condensing, and operating shock of 30 g. The Allen-Bradley 5094-CE10 Interconnect Cable has an approximate weight of 497 grams (17.5 ounces).



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-CE10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-CE10. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF