5094-IB32 | Allen Bradley PLC FLEX 5000

5094-IB32

5094-IB32

Description:

The Allen-Bradley/Rockwell Automation 5094-IB32 module is a DC digital input module for the FLEX 5000 I/O modules. It has a power voltage range between 10 and 32 Volts DC and 32 input channels.

Rated 4.7 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Call

Submit RFQ for 5094-IB32

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation 5094-IB32 module is a DC digital input module for the FLEX 5000 I/O modules. It has a power voltage range between 10 and 32 Volts DC and 32 input channels.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-IB32.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 20 reviews

    Technical Specifications for 5094-IB32

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IB32
Input Channels 32 channels
On-state Voltage Range10 to 32 Volts DC
Minimum On-state Current2 milliamperes at 10 Volts DC
Nominal On-state Current2.4 milliamperes at 24 Volts DC
Maximum On-state Current2.6 milliamperes at 32 Volts DC
Maximum Off-state Voltage5 Volts DC
Maximum Off-state Current1.5 milliamperes
Minimum Input Impedance3.8 kiloohms at 10 Volts DC
Nominal Input Impedance10 kiloohms at 24 Volts DC
Maximum Input Impedance16 kiloohms at 32 Volts DC
Corrosive Resistance ISA S71.04 G2
Certifications UL-us, CE, RCM, Ex, IECEx, KC, Morocco, and EAC
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IB32
Input Channels 32 channels
On-state Voltage Range10 to 32 Volts DC
Minimum On-state Current2 milliamperes at 10 Volts DC
Nominal On-state Current2.4 milliamperes at 24 Volts DC
Maximum On-state Current2.6 milliamperes at 32 Volts DC
Maximum Off-state Voltage5 Volts DC
Maximum Off-state Current1.5 milliamperes
Minimum Input Impedance3.8 kiloohms at 10 Volts DC
Nominal Input Impedance10 kiloohms at 24 Volts DC
Maximum Input Impedance16 kiloohms at 32 Volts DC
Corrosive Resistance ISA S71.04 G2
Certifications UL-us, CE, RCM, Ex, IECEx, KC, Morocco, and EAC
s

About 5094-IB32

The Allen-Bradley 5094-IB32 DC Digital Input Module requires a 24 Volts DC power supply for the left sensor actuator power terminals (+/-) in order to offer field-side power. It has a voltage category rating of 12/24 Volts DC and 32 input channels. The module has an on-state voltage range between 10 and 32 Volts, the minimum on-state current rating is 2 milliamps at 10 Volts, the nominal on-state current rating is 2.4 milliamps at 24 Volts, and the maximum on-state current rating is 2.6 milliamps at 32 Volts DC. It has a maximum off-state voltage rating of 5 Volts DC and a maximum off-state current rating of 1.5 milliamps. The 5094-IB32 DC Digital Input Module has a minimum input impedance rating of 3.8 kiloohms at 10 Volts, a nominal input impedance of 10 kiloohms at 24 Volts, and a maximum input impedance of 16 kiloohms at 32 Volts DC.



 



The Allen-Bradley 5094-IB32 DC Digital Input Module has an operating temperature range from -40 to +70 degrees Celsius according to the IEC 60068-2-1 standards for operating in cold environments, the IEC 60068-2-2 standards for operating with dry heat, and the IEC 60068-2-14 standards for operating with thermal shock. In addition to that, the storage temperature ranges between -40 and 85 degrees Celsius in accordance with the IEC 60068-2-1 standards when the module is stored unpackaged in a cold environment, the IEC 60068-2-2 standards when the module is stored unpackaged in dry heat, and the IEC 60068-2-14 standards when the module is stored unpackaged with thermal shock. The module has a maximum surrounding air temperature rating of 70 degrees Celsius and relative humidity range from 5 to 95 percent, non-condensing. It has a corrosive resistance rating of ISA S71.04 G2, which is for a non-extreme (non-XT) environment. It conforms to international standards such as the c-UL-us, CE, RCM, Ex, IECEx, KC, Morocco, and EAC standards.



Repair Services for 5094-IB32

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-IB32. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-IB32

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-IB32

Resolutions For 5094-IB32

About

Technical Specifications for 5094-IB32

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IB32
Input Channels 32 channels
On-state Voltage Range10 to 32 Volts DC
Minimum On-state Current2 milliamperes at 10 Volts DC
Nominal On-state Current2.4 milliamperes at 24 Volts DC
Maximum On-state Current2.6 milliamperes at 32 Volts DC
Maximum Off-state Voltage5 Volts DC
Maximum Off-state Current1.5 milliamperes
Minimum Input Impedance3.8 kiloohms at 10 Volts DC
Nominal Input Impedance10 kiloohms at 24 Volts DC
Maximum Input Impedance16 kiloohms at 32 Volts DC
Corrosive Resistance ISA S71.04 G2
Certifications UL-us, CE, RCM, Ex, IECEx, KC, Morocco, and EAC
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IB32
Input Channels 32 channels
On-state Voltage Range10 to 32 Volts DC
Minimum On-state Current2 milliamperes at 10 Volts DC
Nominal On-state Current2.4 milliamperes at 24 Volts DC
Maximum On-state Current2.6 milliamperes at 32 Volts DC
Maximum Off-state Voltage5 Volts DC
Maximum Off-state Current1.5 milliamperes
Minimum Input Impedance3.8 kiloohms at 10 Volts DC
Nominal Input Impedance10 kiloohms at 24 Volts DC
Maximum Input Impedance16 kiloohms at 32 Volts DC
Corrosive Resistance ISA S71.04 G2
Certifications UL-us, CE, RCM, Ex, IECEx, KC, Morocco, and EAC

About 5094-IB32

The Allen-Bradley 5094-IB32 DC Digital Input Module requires a 24 Volts DC power supply for the left sensor actuator power terminals (+/-) in order to offer field-side power. It has a voltage category rating of 12/24 Volts DC and 32 input channels. The module has an on-state voltage range between 10 and 32 Volts, the minimum on-state current rating is 2 milliamps at 10 Volts, the nominal on-state current rating is 2.4 milliamps at 24 Volts, and the maximum on-state current rating is 2.6 milliamps at 32 Volts DC. It has a maximum off-state voltage rating of 5 Volts DC and a maximum off-state current rating of 1.5 milliamps. The 5094-IB32 DC Digital Input Module has a minimum input impedance rating of 3.8 kiloohms at 10 Volts, a nominal input impedance of 10 kiloohms at 24 Volts, and a maximum input impedance of 16 kiloohms at 32 Volts DC.



 



The Allen-Bradley 5094-IB32 DC Digital Input Module has an operating temperature range from -40 to +70 degrees Celsius according to the IEC 60068-2-1 standards for operating in cold environments, the IEC 60068-2-2 standards for operating with dry heat, and the IEC 60068-2-14 standards for operating with thermal shock. In addition to that, the storage temperature ranges between -40 and 85 degrees Celsius in accordance with the IEC 60068-2-1 standards when the module is stored unpackaged in a cold environment, the IEC 60068-2-2 standards when the module is stored unpackaged in dry heat, and the IEC 60068-2-14 standards when the module is stored unpackaged with thermal shock. The module has a maximum surrounding air temperature rating of 70 degrees Celsius and relative humidity range from 5 to 95 percent, non-condensing. It has a corrosive resistance rating of ISA S71.04 G2, which is for a non-extreme (non-XT) environment. It conforms to international standards such as the c-UL-us, CE, RCM, Ex, IECEx, KC, Morocco, and EAC standards.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-IB32. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-IB32. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF