5094-IF8 | Allen Bradley PLC FLEX 5000

×

5094-IF8

5094-IF8

Description: The 5094-IF8 input module is an 8-channel input module from the Allen-Bradley/Rockwell Automation Flex 5000 series. All 8 of the input channels are single-ended. The 5094-IF8 input module is a DC-powered input module. Its input voltage range is from 18 to 32 Volts DC. It has a maximum sensor-actuator or SA current rating of 120 milliamps. The 5094-IF8 input module supports Category 2 wire for its power ports and its shielded ports.
Rated 4.9 with 17 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-IF8

Add more parts to quote

Description: The 5094-IF8 input module is an 8-channel input module from the Allen-Bradley/Rockwell Automation Flex 5000 series. All 8 of the input channels are single-ended. The 5094-IF8 input module is a DC-powered input module. Its input voltage range is from 18 to 32 Volts DC. It has a maximum sensor-actuator or SA current rating of 120 milliamps. The 5094-IF8 input module supports Category 2 wire for its power ports and its shielded ports.
About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-IF8.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 17 reviews

    Technical Specifications for 5094-IF8

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8XT
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩ Current: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8XT
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩ Current: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms
s

About 5094-IF8

The Allen-Bradley 5094-IF8 FLEX 5000 module comes with 8 channels, and it is a current and voltage input module. The module’s 8 inputs are single-ended input channels. It uses Sigma-Delta module conversion and two 24-bit multiplexed ADC module conversion too. The 5094-IF8 module’s scan time is 360 microseconds per channel and 1.4 milliseconds per module. This current and voltage input module has the HART handheld compliance rating. It can scale to engineering units, timestamp the inputs, and handle real-time onboard data alarming and CIP Sync. The data formats that the 5094-IF8 module can use are the IEEE 754 data format and the 32-bit floating-point data format. The 5094-IF8 module uses category 2 wire for its shielded ports and for its power ports.



 



The Allen-Bradley 5094-IF8 FLEX 5000 8-channel module comes factory calibrated, but it can be user-calibrated too. Its maximum backplane power voltage rating is 15 Volts DC and the maximum backplane power current is 70 milliamps. The sensor actuator (SA) power voltage range for the 5094-IF8 module 18 to 32 Volts DC and its maximum sensor-actuator (SA) current rating is 120 milliamps. The maximum power dissipation rating in the current mode is 3.5 Watts and the maximum thermal dissipation rating in the current rating 11.94 BTU/hour. This module is an open module that does not come with an enclosure. The maximum surrounding air temperature that the 5094-IF8 current and voltage module can withstand is 158 degrees Fahrenheit.

Technical Description of 5094-IF8

The 5094-IF8 is an Analog 8-channel Current/Voltage Input Module manufactured by Allen-Bradley which has Inputs of 8 single-ended, an Input range, voltage of ±10V0...10V0...5V, and an Input range, current of 0...20 mA4...20 mA as well as a Input impedance of Voltage: >1 MΩCurrent: 250 Ω typical. The Common mode voltage (channel to channel) for this module is ±10V, and the Module conversion method is Sigma-Delta,Two 24-bit multiplexed ADC. The Backplane Power (BP) voltage for this model is 15V DC .

Repair Services for 5094-IF8

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-IF8. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.

Dimensions For 5094-IF8

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-IF8

Resolutions For 5094-IF8

About

Technical Specifications for 5094-IF8

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8XT
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩ Current: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8XT
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩ Current: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms

About 5094-IF8

The Allen-Bradley 5094-IF8 FLEX 5000 module comes with 8 channels, and it is a current and voltage input module. The module’s 8 inputs are single-ended input channels. It uses Sigma-Delta module conversion and two 24-bit multiplexed ADC module conversion too. The 5094-IF8 module’s scan time is 360 microseconds per channel and 1.4 milliseconds per module. This current and voltage input module has the HART handheld compliance rating. It can scale to engineering units, timestamp the inputs, and handle real-time onboard data alarming and CIP Sync. The data formats that the 5094-IF8 module can use are the IEEE 754 data format and the 32-bit floating-point data format. The 5094-IF8 module uses category 2 wire for its shielded ports and for its power ports.



 



The Allen-Bradley 5094-IF8 FLEX 5000 8-channel module comes factory calibrated, but it can be user-calibrated too. Its maximum backplane power voltage rating is 15 Volts DC and the maximum backplane power current is 70 milliamps. The sensor actuator (SA) power voltage range for the 5094-IF8 module 18 to 32 Volts DC and its maximum sensor-actuator (SA) current rating is 120 milliamps. The maximum power dissipation rating in the current mode is 3.5 Watts and the maximum thermal dissipation rating in the current rating 11.94 BTU/hour. This module is an open module that does not come with an enclosure. The maximum surrounding air temperature that the 5094-IF8 current and voltage module can withstand is 158 degrees Fahrenheit.

Technical Description of 5094-IF8

The 5094-IF8 is an Analog 8-channel Current/Voltage Input Module manufactured by Allen-Bradley which has Inputs of 8 single-ended, an Input range, voltage of ±10V0...10V0...5V, and an Input range, current of 0...20 mA4...20 mA as well as a Input impedance of Voltage: >1 MΩCurrent: 250 Ω typical. The Common mode voltage (channel to channel) for this module is ±10V, and the Module conversion method is Sigma-Delta,Two 24-bit multiplexed ADC. The Backplane Power (BP) voltage for this model is 15V DC .
Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-IF8. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-IF8. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
PDF
5094-IF8 PDF