5094-IF8IH | Allen Bradley PLC FLEX 5000

5094-IF8IH

5094-IF8IH

Description:

The Allen-Bradley/Rockwell Automation 5094-IF8IH module is an analog HART input module for FLEX 5000 I/O modules. It has 8 individually isolated input channels and it supports 1 HART per channel modem.

Rated 4.6 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-IF8IH

Add more parts to quote

Description:

The Allen-Bradley/Rockwell Automation 5094-IF8IH module is an analog HART input module for FLEX 5000 I/O modules. It has 8 individually isolated input channels and it supports 1 HART per channel modem.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-IF8IH.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 6 reviews

    Technical Specifications for 5094-IF8IH

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IF8IH
Inputs8 individually isolated
Input Voltage Range0 to 5 Volts, +/- 10 Volts, and 0 to 10 Volts
Input Current Range 0 to 20 milliamperes and 4 to 20 milliamperes (HART)
Input Impedance Voltage>1 megaohm
Input Impedance Current250 ohms and +/- 5 ohms (typical)
HART SupportYes, per channel HART modem
Module Conversion MethodSigma-Delta, 24-bit ADC per channel
Channel to Channel Isolation250V (continuous), Basic Insulation Type
Effective Resolution in Current (At 60 Hertz Notch Filter Frequency)0 to 20 milliamperes with 17 bits and 4 to 20 milliamperes with 17 bits
Effective Resolution in Voltage (At 60 Hertz Notch Filter Frequency)+/- 10 Volts with 17 bits, 0 to 10 Volts with 17 bits, and 0 to 5 Volts with 16 bits
Backplane Power (BP) Voltage15 Volts DC
Backplane Power (BP) Current 35 milliamperes
Operating Temperature -40 to 158 degrees Fahrenheit
Surrounding Air Temperature158 degrees Fahrenheit
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IF8IH
Inputs8 individually isolated
Input Voltage Range0 to 5 Volts, +/- 10 Volts, and 0 to 10 Volts
Input Current Range 0 to 20 milliamperes and 4 to 20 milliamperes (HART)
Input Impedance Voltage>1 megaohm
Input Impedance Current250 ohms and +/- 5 ohms (typical)
HART SupportYes, per channel HART modem
Module Conversion MethodSigma-Delta, 24-bit ADC per channel
Channel to Channel Isolation250V (continuous), Basic Insulation Type
Effective Resolution in Current (At 60 Hertz Notch Filter Frequency)0 to 20 milliamperes with 17 bits and 4 to 20 milliamperes with 17 bits
Effective Resolution in Voltage (At 60 Hertz Notch Filter Frequency)+/- 10 Volts with 17 bits, 0 to 10 Volts with 17 bits, and 0 to 5 Volts with 16 bits
Backplane Power (BP) Voltage15 Volts DC
Backplane Power (BP) Current 35 milliamperes
Operating Temperature -40 to 158 degrees Fahrenheit
Surrounding Air Temperature158 degrees Fahrenheit
s

About 5094-IF8IH

The Allen-Bradley 5094-IF8IH Analog HART Input Module has an input voltage range of 0 to 5 Volts, +/- 10 Volts, and 0 to 10 Volts. The input current ranges between 0 and 20 milliamps and 4 and 20 milliamps (HART). The module has an input impedance voltage rating greater than 1 megaohm and an input impedance current rating of 250 ohms and +/- 5 ohms (typical). It has a continuous channel to channel isolation rating of 250 Volts AC and a module conversion method that is the sigma-delta rating with a 24-bit Analog-to-Digital Converter (ADC) per channel. The 5094-IF8IH Module has an effective resolution current between 0 and 20 milliamps with 17 bits and between 4 and 20 milliamps with 17 bits at a frequency of 60 Hertz with a notch filter. It also has an effective resolution voltage of +/- 10 Volts with 17 bits, 0 to 10 Volts with 17 bits, and 0 to 5 Volts with 16 bits at a frequency of 60 Hertz with a notch filter.



 



The Allen-Bradley 5094-IF8IH Analog HART Input Module scan time both per channel and per module is 1.0 millisecond at a 10-kilohertz notch. The module has an onboard data alarming feature, an CIP sync feature, input timestamps, a feature for scaling to engineering units, and a real-time channel sampling feature. The 5094-IF8IH module has a backplane power (BP) voltage rating of 15 Volts DC and a maximum backplane power (BP) current rating of 35 milliamps. It has 2 calibration methods, that are the user-performed method and the factory calibrated method. The Analog HART input module has an operating temperature range between -40 and 158 degrees Fahrenheit and a maximum surrounding air temperature rating of 158 degrees Fahrenheit.



Repair Services for 5094-IF8IH

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-IF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-IF8IH

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-IF8IH

Resolutions For 5094-IF8IH

About

Technical Specifications for 5094-IF8IH

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IF8IH
Inputs8 individually isolated
Input Voltage Range0 to 5 Volts, +/- 10 Volts, and 0 to 10 Volts
Input Current Range 0 to 20 milliamperes and 4 to 20 milliamperes (HART)
Input Impedance Voltage>1 megaohm
Input Impedance Current250 ohms and +/- 5 ohms (typical)
HART SupportYes, per channel HART modem
Module Conversion MethodSigma-Delta, 24-bit ADC per channel
Channel to Channel Isolation250V (continuous), Basic Insulation Type
Effective Resolution in Current (At 60 Hertz Notch Filter Frequency)0 to 20 milliamperes with 17 bits and 4 to 20 milliamperes with 17 bits
Effective Resolution in Voltage (At 60 Hertz Notch Filter Frequency)+/- 10 Volts with 17 bits, 0 to 10 Volts with 17 bits, and 0 to 5 Volts with 16 bits
Backplane Power (BP) Voltage15 Volts DC
Backplane Power (BP) Current 35 milliamperes
Operating Temperature -40 to 158 degrees Fahrenheit
Surrounding Air Temperature158 degrees Fahrenheit
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-IF8IH
Inputs8 individually isolated
Input Voltage Range0 to 5 Volts, +/- 10 Volts, and 0 to 10 Volts
Input Current Range 0 to 20 milliamperes and 4 to 20 milliamperes (HART)
Input Impedance Voltage>1 megaohm
Input Impedance Current250 ohms and +/- 5 ohms (typical)
HART SupportYes, per channel HART modem
Module Conversion MethodSigma-Delta, 24-bit ADC per channel
Channel to Channel Isolation250V (continuous), Basic Insulation Type
Effective Resolution in Current (At 60 Hertz Notch Filter Frequency)0 to 20 milliamperes with 17 bits and 4 to 20 milliamperes with 17 bits
Effective Resolution in Voltage (At 60 Hertz Notch Filter Frequency)+/- 10 Volts with 17 bits, 0 to 10 Volts with 17 bits, and 0 to 5 Volts with 16 bits
Backplane Power (BP) Voltage15 Volts DC
Backplane Power (BP) Current 35 milliamperes
Operating Temperature -40 to 158 degrees Fahrenheit
Surrounding Air Temperature158 degrees Fahrenheit

About 5094-IF8IH

The Allen-Bradley 5094-IF8IH Analog HART Input Module has an input voltage range of 0 to 5 Volts, +/- 10 Volts, and 0 to 10 Volts. The input current ranges between 0 and 20 milliamps and 4 and 20 milliamps (HART). The module has an input impedance voltage rating greater than 1 megaohm and an input impedance current rating of 250 ohms and +/- 5 ohms (typical). It has a continuous channel to channel isolation rating of 250 Volts AC and a module conversion method that is the sigma-delta rating with a 24-bit Analog-to-Digital Converter (ADC) per channel. The 5094-IF8IH Module has an effective resolution current between 0 and 20 milliamps with 17 bits and between 4 and 20 milliamps with 17 bits at a frequency of 60 Hertz with a notch filter. It also has an effective resolution voltage of +/- 10 Volts with 17 bits, 0 to 10 Volts with 17 bits, and 0 to 5 Volts with 16 bits at a frequency of 60 Hertz with a notch filter.



 



The Allen-Bradley 5094-IF8IH Analog HART Input Module scan time both per channel and per module is 1.0 millisecond at a 10-kilohertz notch. The module has an onboard data alarming feature, an CIP sync feature, input timestamps, a feature for scaling to engineering units, and a real-time channel sampling feature. The 5094-IF8IH module has a backplane power (BP) voltage rating of 15 Volts DC and a maximum backplane power (BP) current rating of 35 milliamps. It has 2 calibration methods, that are the user-performed method and the factory calibrated method. The Analog HART input module has an operating temperature range between -40 and 158 degrees Fahrenheit and a maximum surrounding air temperature rating of 158 degrees Fahrenheit.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-IF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-IF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF