Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley FLEX 5000 5094-IF8IHXT

Product image is representative; revision or series may vary. Contact us to request a specific version.

5094-IF8IHXT

|
Need a Specific Revision?

The Allen-Bradley/Rockwell Automation 5094-IF8IHXT module is an Analog HART input module for FLEX 5000 series I/O modules. It has 8 individually isolated input channels and it is rated for an extreme (XT) environment.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 5094-IF8IHXT

ManufacturerAllen Bradley
CategoryPLCs
Product LineFLEX 5000
Part Number5094-IF8IHXT
Weight2.00 lbs (0.91 kg)
Backplane Power Voltage15 Volts DC
Backplane Power Current35 milliamperes
Sensor Actuator Power Voltage21 to 27 volts DC per channel and 18 to 32 Volts DC per module
Sensor Actuator Power Current25 milliamperes per channel and 350 milliamperes for the module
Power Dissipation3.5 Watts for current mode
Thermal Dissipation11.94 British Thermal Unit (BTU) per hour for the current mode
Mode Noise Rejection Ratioof 65 decibels at a frequency of 50/60 Hertz
Operating Temperature-40 to +70 degrees Celsius
Surrounding Air Temperature70 degrees Celsius
Relative Humidity5 to 95% and non-condensing
Request a Repair

The Allen-Bradley 5094-IF8IHXT Analog HART Input Module has 8 isolated input channels that are current sourcing inputs. It has a backplane power voltage rating of 15 Volts DC and a backplane power current rating not exceeding 35 milliamps. The module has a sensor-actuator power voltage range between 21 and 27 volts DC per channel and between 18 and 32 Volts DC per module. The sensor actuator power current rating should not exceed 25 milliamps per channel and 350 milliamps for the whole module. The 5094-IF8IHXT module has a maximum power dissipation rating of 3.5 Watts for the current mode and a maximum thermal dissipation of 11.94 British Thermal Units (BTU) per hour for the current mode. The 5094-IF8IHXT Analog HART Input Module has LED indicators that include 8 red/yellow input status indicators, one red/green Sensor Actuator (SA) power status indicator, and one red/green module status indicator.

The Allen-Bradley 5094-IF8IHXT Analog HART Input Module has a normal mode noise rejection ratio of 65 decibels at a frequency of 50/60 Hertz. The wire category of the module has 2 power ports and 2 shielded ports. The unit has dimensions of 87.0 x 94.0 x 54.0 millimeters (3.43 x 3.70 x 2.13 inches) and an approximate weight of 0.353 pounds (160 grams). It has an operating temperature range from -40 to 70 degrees Celsius according to the IEC 60068-2-14 standards for operating with thermal shock, the IEC 60068-2-1 standards for operating in a cold environment, and the IEC 60068-2-2 standards for being unpackaged but non-operating dry heat. The 5094-IF8IHXT module has a maximum surrounding air temperature rating of 70 degrees Celsius. This module has a relative humidity range of 5 to 95%, non-condensing.