5094-MB - In Stock | Allen Bradley PLC FLEX 5000

5094-MB

5094-MB

Description: The 5094-MB mounting base is an Allen-Bradley/Rockwell Automation Flex 5000 series mounting base. It is meant to be connected to a removable terminal block to create a complete Flex 5000 terminal base. The 5094-MB mounting base's features include a system connector and a backplane connector. It also has pegs for locking into place on the removable terminal block and hardware for DIN Rail mounting. The 5094-MB mounting base weighs about 0.16 pounds and it supports convection cooling.
Rated 4.6 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for 5094-MB

Add more parts to quote

Description: The 5094-MB mounting base is an Allen-Bradley/Rockwell Automation Flex 5000 series mounting base. It is meant to be connected to a removable terminal block to create a complete Flex 5000 terminal base. The 5094-MB mounting base's features include a system connector and a backplane connector. It also has pegs for locking into place on the removable terminal block and hardware for DIN Rail mounting. The 5094-MB mounting base weighs about 0.16 pounds and it supports convection cooling.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-MB.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 6 reviews

    Technical Specifications for 5094-MB

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-MB
DescriptionMounting base
Compatible ModulesFlex 5000 modules
Backplane Current 100 milliamps
ListingThis content was written and compiled by dosupply.com and should not be copied.
Voltage15 Volts DC
Weight0.16 lbs
Dimensions3.35 x 3.70 x 1.48 inches
StandardscULus, CE, RCM
CoolingConvection method
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-MB
DescriptionMounting base
Compatible ModulesFlex 5000 modules
Backplane Current 100 milliamps
Voltage15 Volts DC
Weight0.16 lbs
Dimensions3.35 x 3.70 x 1.48 inches
StandardscULus, CE, RCM
CoolingConvection method
s

About 5094-MB

The 5094-MB base is an Allen-Bradley manufactured mounting base. It is a FLEX 5000-compatible base. It takes in 100 milliamps of backplane current and runs with a a voltage rating of 15 Volts DC. The terminal base consists of a mounting base and a removable terminal block. It can be easily mounted by using a DIN rail that is made of zinc plate and chromate steel. It has a small form factor and dimensions of 3.35 inches in height, 3.70 inches in width, and 1.48 inches in depth. It weighs around 0.16 pounds. The 5094-MB mounting base has an open enclosure and it meets the T4 North American Temperature code. The terminal base assemblies are made to be used in an environment with a temperature not exceeding 70 degrees Celsius.



 



The 5094-MB mounting base is able to withstand vibrations of up to 5 G between 10 and 500 Hertz and shocks of 30 G when operating and when not operating. The mounting base has been certified with the c-UL-us, CE, and RCM standards. The 5094-MB base is used with the FLEX 5000 I/O modules that are used with the Logix 5000 controllers. The mounting base can accommodate different components of the I/O modules. During the installation of different components of the I/O, enough space should be left free for airflow. The module temperature is maintained by using the natural convection cooling method. The 5094-MB base should be placed on a firm and stable surface during the mounting or installation process. All the power sources should be disconnected during installation.

Technical Description of 5094-MB

The 5094-MB base is a mounting base by Allen-Bradley. It is compatible with the FLEX 5000 series.

Repair Services for 5094-MB

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-MB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-MB

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-MB

Resolutions For 5094-MB

About

Technical Specifications for 5094-MB

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-MB
DescriptionMounting base
Compatible ModulesFlex 5000 modules
Backplane Current 100 milliamps
Voltage15 Volts DC
Weight0.16 lbs
Dimensions3.35 x 3.70 x 1.48 inches
StandardscULus, CE, RCM
CoolingConvection method
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-MB
DescriptionMounting base
Compatible ModulesFlex 5000 modules
Backplane Current 100 milliamps
Voltage15 Volts DC
Weight0.16 lbs
Dimensions3.35 x 3.70 x 1.48 inches
StandardscULus, CE, RCM
CoolingConvection method

About 5094-MB

The 5094-MB base is an Allen-Bradley manufactured mounting base. It is a FLEX 5000-compatible base. It takes in 100 milliamps of backplane current and runs with a a voltage rating of 15 Volts DC. The terminal base consists of a mounting base and a removable terminal block. It can be easily mounted by using a DIN rail that is made of zinc plate and chromate steel. It has a small form factor and dimensions of 3.35 inches in height, 3.70 inches in width, and 1.48 inches in depth. It weighs around 0.16 pounds. The 5094-MB mounting base has an open enclosure and it meets the T4 North American Temperature code. The terminal base assemblies are made to be used in an environment with a temperature not exceeding 70 degrees Celsius.



 



The 5094-MB mounting base is able to withstand vibrations of up to 5 G between 10 and 500 Hertz and shocks of 30 G when operating and when not operating. The mounting base has been certified with the c-UL-us, CE, and RCM standards. The 5094-MB base is used with the FLEX 5000 I/O modules that are used with the Logix 5000 controllers. The mounting base can accommodate different components of the I/O modules. During the installation of different components of the I/O, enough space should be left free for airflow. The module temperature is maintained by using the natural convection cooling method. The 5094-MB base should be placed on a firm and stable surface during the mounting or installation process. All the power sources should be disconnected during installation.

Technical Description of 5094-MB

The 5094-MB base is a mounting base by Allen-Bradley. It is compatible with the FLEX 5000 series.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-MB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-MB. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF