The Allen-Bradley 5094-OB8 module is a 24 Volts DC output module. It is a FLEX 5000 series module with 8 outputs. The module is used with the Logix controllers. There are LED indicators on the front of the module that shows the power and operating status of the module at a glance. These indicators illuminate in red and green for different status updates. It is easy to mount the module with latching hooks and the release lever on the top side. Keyswitch ports are available on the rear side of the module that can be turned to switch between different settings. The 5094-OB8 module should be installed in an environment with a maximum surrounding air temperature of 70 degrees Celsius. It has an open enclosure and it should be protected from dust, dirt, and other pollutants. The output current rating of the module is 2 Amps with 18 to 32 Volts DC voltage per point. It is powered with a backplane power rating of 70 milliamps and 15 Volts DC. The output module supports TB keying.

The Allen-Bradley FLEX 5000 5094-OB8 output module has an isolation voltage rating of 250 Volts AC continuous and it comes with the basic insulation type. No isolation is present between the SA power and the output ports of the output module. The module uses a wire size between 22 and 14 AWG and it uses a solid or stranded copper wire that is rated for 105 degrees Celsius. This wire offers high levels of insulation and has better efficiency than other kinds of wire. The 5094-OB8 output module has a pilot duty current rating of 2 Amps. The 5094-OB8 output module meets the T4 temperature code for North America. The module is able to withstand considerable levels of shocks and vibration when operating and when not operating.