5094-OW4IS
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 5094-OW4IS. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Allen-Bradley |
Brand | Allen-Bradley |
Part Number | 5094-OW4ISXT |
Module Type | Safety Digital 4-point Isolated Relay Output Module |
Output ratings (OUT), max | 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel |
Output delay time, max for Off to On and On to Off | 20 ms, 10 ms |
Safety Integrity Level | Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. |
Safety Reaction Time (SRT) | 20 ms |
Outputs | 4 - Form A (normally open) |
Output voltage range | 5...125V DC and 5...240V AC |
Backplane Power (BP) voltage | 15V DC |
Backplane Power (BP) current, max | 100 mA |
Sensor Actuator Power (SA) voltage range | 18...32V DC |
Sensor Actuator Power (SA) current, max | 125 mA |
Power dissipation, max | 3.5 W |
Manufacturer | Allen-Bradley |
Brand | Allen-Bradley |
Part Number | 5094-OW4ISXT |
Module Type | Safety Digital 4-point Isolated Relay Output Module |
Output ratings (OUT), max | 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel |
Output delay time, max for Off to On and On to Off | 20 ms, 10 ms |
Safety Integrity Level | Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. |
Safety Reaction Time (SRT) | 20 ms |
Outputs | 4 - Form A (normally open) |
Output voltage range | 5...125V DC and 5...240V AC |
Backplane Power (BP) voltage | 15V DC |
Backplane Power (BP) current, max | 100 mA |
Sensor Actuator Power (SA) voltage range | 18...32V DC |
Sensor Actuator Power (SA) current, max | 125 mA |
Power dissipation, max | 3.5 W |
The 5094-OW4IS module is an output module from Allen-Bradley/Rockwell Automation. This safety digital relay output module is available through the FLEX 5000 series that offers multiple components in order to meet the requirements of different applications. The 5094-OW4IS module has an open enclosure and the T4 temperature code (ATEX, IECEx, North American). The module is tested for operation on a temperature range of -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit) and it can be stored in temperature ranges from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 5094-OW4IS module features an off-state leakage of 0 milliAmps and it does not include onboard snubbers. The module has a maximum output delay time of 20 milliseconds off to on and of 10 milliseconds on to off. The safety reaction time (SRT) of the module is 20 milliseconds. In addition to that, the mean bounce time is 1 millisecond.
The Allen-Bradley 5094-OW4IS module features output control in fault state per point and it supports different output states. The minimum load current of the module is 1 milliAmp. The specified contact life is 100K cycles at a resistive load of 2 Amps / 50K cycles at a resistive load of 4 Amps. The 5094-OW4IS module has 4 Form A outputs that are normally open and an output voltage range of 5 to 125 Volts DC or 5 to 240 Volts AC. The backplane power (BP) voltage rating is 15 Volts DC and the maximum backplane power (BP) current rating is 100 milliAmps. The voltage range of the sensor-actuator power (SA) is from18 to 32 Volts DC and the maximum current rating of the sensor-actuator power (SA) 125 milliAmps.
The 5094-OW4IS is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has Output ratings (OUT), max of 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel, an Output delay time, max for Off to On and On to Off of 20 ms, 10 ms, and an Safety Integrity Level of Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. as well as an Safety Reaction Time (SRT) of 20 ms. The Outputs for this module is 4 - Form A (normally open), and the Output voltage range is 5...125V DC and 5...240V AC. The for this model are .
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Allen-Bradley |
Brand | Allen-Bradley |
Part Number | 5094-OW4ISXT |
Module Type | Safety Digital 4-point Isolated Relay Output Module |
Output ratings (OUT), max | 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel |
Output delay time, max for Off to On and On to Off | 20 ms, 10 ms |
Safety Integrity Level | Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. |
Safety Reaction Time (SRT) | 20 ms |
Outputs | 4 - Form A (normally open) |
Output voltage range | 5...125V DC and 5...240V AC |
Backplane Power (BP) voltage | 15V DC |
Backplane Power (BP) current, max | 100 mA |
Sensor Actuator Power (SA) voltage range | 18...32V DC |
Sensor Actuator Power (SA) current, max | 125 mA |
Power dissipation, max | 3.5 W |
Manufacturer | Allen-Bradley |
Brand | Allen-Bradley |
Part Number | 5094-OW4ISXT |
Module Type | Safety Digital 4-point Isolated Relay Output Module |
Output ratings (OUT), max | 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel |
Output delay time, max for Off to On and On to Off | 20 ms, 10 ms |
Safety Integrity Level | Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. |
Safety Reaction Time (SRT) | 20 ms |
Outputs | 4 - Form A (normally open) |
Output voltage range | 5...125V DC and 5...240V AC |
Backplane Power (BP) voltage | 15V DC |
Backplane Power (BP) current, max | 100 mA |
Sensor Actuator Power (SA) voltage range | 18...32V DC |
Sensor Actuator Power (SA) current, max | 125 mA |
Power dissipation, max | 3.5 W |
The 5094-OW4IS module is an output module from Allen-Bradley/Rockwell Automation. This safety digital relay output module is available through the FLEX 5000 series that offers multiple components in order to meet the requirements of different applications. The 5094-OW4IS module has an open enclosure and the T4 temperature code (ATEX, IECEx, North American). The module is tested for operation on a temperature range of -40 to 70 degrees Celsius (-40 to 158 degrees Fahrenheit) and it can be stored in temperature ranges from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The 5094-OW4IS module features an off-state leakage of 0 milliAmps and it does not include onboard snubbers. The module has a maximum output delay time of 20 milliseconds off to on and of 10 milliseconds on to off. The safety reaction time (SRT) of the module is 20 milliseconds. In addition to that, the mean bounce time is 1 millisecond.
The Allen-Bradley 5094-OW4IS module features output control in fault state per point and it supports different output states. The minimum load current of the module is 1 milliAmp. The specified contact life is 100K cycles at a resistive load of 2 Amps / 50K cycles at a resistive load of 4 Amps. The 5094-OW4IS module has 4 Form A outputs that are normally open and an output voltage range of 5 to 125 Volts DC or 5 to 240 Volts AC. The backplane power (BP) voltage rating is 15 Volts DC and the maximum backplane power (BP) current rating is 100 milliAmps. The voltage range of the sensor-actuator power (SA) is from18 to 32 Volts DC and the maximum current rating of the sensor-actuator power (SA) 125 milliAmps.
The 5094-OW4IS is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has Output ratings (OUT), max of 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel, an Output delay time, max for Off to On and On to Off of 20 ms, 10 ms, and an Safety Integrity Level of Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. as well as an Safety Reaction Time (SRT) of 20 ms. The Outputs for this module is 4 - Form A (normally open), and the Output voltage range is 5...125V DC and 5...240V AC. The for this model are .
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |