5094-OW4ISXT | Allen Bradley PLC FLEX 5000

5094-OW4ISXT

5094-OW4ISXT

Description:

The 5094-OW4ISXT is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has Output ratings (OUT), max of 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel, an Output delay time, max for Off to On and On to Off of 20 ms, 10 ms, and an Safety Integrity Level of Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. as well as an Safety Reaction Time (SRT) of 20 ms. The Outputs for this module is 4 - Form A (normally open), and the Output voltage range is 5...125V DC and 5...240V AC. The for this model are .

Rated 4.5 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-OW4ISXT

Add more parts to quote

Description:

The 5094-OW4ISXT is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has Output ratings (OUT), max of 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel, an Output delay time, max for Off to On and On to Off of 20 ms, 10 ms, and an Safety Integrity Level of Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. as well as an Safety Reaction Time (SRT) of 20 ms. The Outputs for this module is 4 - Form A (normally open), and the Output voltage range is 5...125V DC and 5...240V AC. The for this model are .


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-OW4ISXT.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 17 reviews

    Technical Specifications for 5094-OW4ISXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENTR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32VDC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1130 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.1 W @ 18V DC
Thermal dissipation, max17.4 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENTR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32VDC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1130 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.1 W @ 18V DC
Thermal dissipation, max17.4 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
s

About 5094-OW4ISXT

The 5094-OW4ISXT module is an Allen-Bradley/Rockwell Automation safety digital relay output module that comes from the FLEX 5000 product series. The module is made in accordance with all relevant directives in regard to immunity, emissions, and safety. Also, the module is classified for corrosion resistance in accordance with the ISA S71.04 G3 standards. The 5094-OW4ISXT module has maximum output ratings (OUT) of 5 to 30 Volts DC and 125/240 Volts AC for 2 Amps per channel. The unit has 4 outputs (Form A) which come as open and output voltage range of 5 to 125 Volts DC or 5 to 240 Volts AC. The 5094-OW4ISXT module has a backplane power (BP) voltage rating of 15 Volts DC and a backplane power (BP) current ratings of 100 milliAmps (maximum). The maximum use of power is 3.5 Watts while the maximum thermal dissipation is 11.94 BTU per hour.



 



The 5094-OW4ISXT module has 18 to 32 Volts DC sensor-actuator power (SA) voltage range and 125 milliAmps maximum SA current. The module has an isolation voltage of 250 Volts (continuous) for basic and reinforced types of insulation and it allows for mechanical or electronic module keying. The module has status indicators and it comes with an enclosure with an open style. The 5094-OW4ISXT module has several protective features and it has an expected contact life of 100K cycles at 2 Amps of resistive load current and 50K cycles at 4 Amps of resistive load current. The 5094-OW4ISXT module has dimensions that include a height of 87 millimeters (3.4 inches), a width of 94 millimeters (3.7 inches), and a depth of 54 millimeters (2.1 inches). The weight of the unit is approximately 0.32 pounds or 146 grams.



Repair Services for 5094-OW4ISXT

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-OW4ISXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.

Dimensions For 5094-OW4ISXT

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-OW4ISXT

Resolutions For 5094-OW4ISXT

About

Technical Specifications for 5094-OW4ISXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENTR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32VDC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1130 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.1 W @ 18V DC
Thermal dissipation, max17.4 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-AENTR
Adapter TypeFLEX 5000 EtherNet/IP Adapter with RJ45 Ports
Voltage and current ratings, MP18...32V DC, 1250 mA
Voltage and current ratings, MP inrush18...32VDC, 3200 mA for 100 ms
Voltage and current ratings, backplane15V DC, 1130 mA
Recommended external overcurrent protectionMOD Power: 10...12A @ 22.5...43.2 A2t, Fast ActingSA Power: 20 A @ 250V AC
Power dissipation, max5.1 W @ 18V DC
Thermal dissipation, max17.4 BTU/hr @ 24V DC
Isolation voltage300V (continuous), Basic Insulation Type Tested @ 2121V AC for 60 s, Power to Backplane and Backplane to Ethernet Tested @ 4242V DC for 60 s, Power to Ethernet ports No isolation between Ethernet ports
Wiring category1 - on power ports. 1- on Ethernet ports.
Wire typeCopper
Wire size, power RTB0.34...2.5 mm (22...14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 1.2 mm (3/64 in.) insulation, max, single wire connection only. Ferrule according to DIN 46 228/1.
Wire size, functional earth terminal2.5 mm (14 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 3.5 mm (0.14 in.) max diameter including insulation, single wire connection only.

About 5094-OW4ISXT

The 5094-OW4ISXT module is an Allen-Bradley/Rockwell Automation safety digital relay output module that comes from the FLEX 5000 product series. The module is made in accordance with all relevant directives in regard to immunity, emissions, and safety. Also, the module is classified for corrosion resistance in accordance with the ISA S71.04 G3 standards. The 5094-OW4ISXT module has maximum output ratings (OUT) of 5 to 30 Volts DC and 125/240 Volts AC for 2 Amps per channel. The unit has 4 outputs (Form A) which come as open and output voltage range of 5 to 125 Volts DC or 5 to 240 Volts AC. The 5094-OW4ISXT module has a backplane power (BP) voltage rating of 15 Volts DC and a backplane power (BP) current ratings of 100 milliAmps (maximum). The maximum use of power is 3.5 Watts while the maximum thermal dissipation is 11.94 BTU per hour.



 



The 5094-OW4ISXT module has 18 to 32 Volts DC sensor-actuator power (SA) voltage range and 125 milliAmps maximum SA current. The module has an isolation voltage of 250 Volts (continuous) for basic and reinforced types of insulation and it allows for mechanical or electronic module keying. The module has status indicators and it comes with an enclosure with an open style. The 5094-OW4ISXT module has several protective features and it has an expected contact life of 100K cycles at 2 Amps of resistive load current and 50K cycles at 4 Amps of resistive load current. The 5094-OW4ISXT module has dimensions that include a height of 87 millimeters (3.4 inches), a width of 94 millimeters (3.7 inches), and a depth of 54 millimeters (2.1 inches). The weight of the unit is approximately 0.32 pounds or 146 grams.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-OW4ISXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-OW4ISXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
PDF