5094-OW8IXT | Allen Bradley PLC FLEX 5000

×

5094-OW8IXT

5094-OW8IXT

Description:

The 5094-OW8IXT is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has an Relay rating of 2 A resistive/channel @ 5...30V DC 2 A resistive/channel @ 5...240V AC, 50/60 Hz 2 A general/channel @ 5...240V AC, 50/60 Hz 2 A ATEX/IECEx @ 5...240V AC, 50/60 Hz, an Off-state leakage of 0 mA (dry contact, no onboard snubbers), and an Output current rating, max of 2 A per channe as well as a Output delay time, max for Off to On and On to Off of 10 ms 10 ms. The Initial contact resistance, max for this module is 30 mΩ, and the Bounce time, mean is 500 μs. The Indicators for this model are 1 green/red module status indicator 1 green/red SA power status indicator 8 yellow/red I/O status indicators .

Rated 4.9 with 14 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-OW8IXT

Add more parts to quote

Description:

The 5094-OW8IXT is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has an Relay rating of 2 A resistive/channel @ 5...30V DC 2 A resistive/channel @ 5...240V AC, 50/60 Hz 2 A general/channel @ 5...240V AC, 50/60 Hz 2 A ATEX/IECEx @ 5...240V AC, 50/60 Hz, an Off-state leakage of 0 mA (dry contact, no onboard snubbers), and an Output current rating, max of 2 A per channe as well as a Output delay time, max for Off to On and On to Off of 10 ms 10 ms. The Initial contact resistance, max for this module is 30 mΩ, and the Bounce time, mean is 500 μs. The Indicators for this model are 1 green/red module status indicator 1 green/red SA power status indicator 8 yellow/red I/O status indicators .


About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-OW8IXT.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 14 reviews

    Technical Specifications for 5094-OW8IXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩCurrent: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩCurrent: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms
s

About 5094-OW8IXT

The Allen-Bradley 5094-OW8IXT module is a safety output module from the Allen-Bradley FLEX 5000 module series that has 4 isolated relay outputs. There are 2 outputs that are 2 Amps rated resistive channels that operate at 5 to 30 Volts DC or at 5 to 240 Volts AC at 50 to 60 Hertz frequency. There is also a single 2 Amps rated general channel that operates at 5 to 240 Volts AC at 50 to 60 Hertz frequency, and a single 2 Amps rated ATEX/IECEx that operates at 5 to 240 Volts AC at 50 to 60 Hertz frequency. The 5094-OW8IXT module’s outputs are not fused. The off-state leakage on the 5094-OW8IXT safety output module is 0 milliamps with dry contacts and no onboard snubbers and its maximum output current rating is 2 Amps per output channel.



 



The Allen-Bradley 5094-OW8IXT FLEX 5000 safety output module has 10 milliseconds of maximum off to on output delay time and an equal amount of maximum on to off output delay time. This output module can operate with AC or DC voltage in voltage ranges of 5 to 125 Volts DC or 5 to 240 Volts AC. Its maximum power dissipation rating 3.5 Watts and its maximum thermal dissipation 11.94 BTU/hour. The 5094-OW8IXT module uses Wire Category 1 for the signal ports and Wire Category 2 for the power ports. This safety output module can operate safely at a temperature between -40 and 158 degrees Fahrenheit. This wide temperature range allows the module to be used a variety of different industrial environments and applications.



Repair Services for 5094-OW8IXT

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-OW8IXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.

Dimensions For 5094-OW8IXT

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-OW8IXT

Resolutions For 5094-OW8IXT

About

Technical Specifications for 5094-OW8IXT

ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩCurrent: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms
ManufacturerAllen-Bradley
BrandAllen-Bradley
Part Number5094-IF8
Module TypeAnalog 8-channel Current/Voltage Input Module
Inputs8 single-ended
Input range, voltage±10V0...10V0...5V
Input range, current0...20 mA4...20 mA
Input impedanceVoltage: >1 MΩCurrent: 250 Ω typical
Common mode voltage (channel to channel)±10V
Module conversion methodSigma-Delta,Two 24-bit multiplexed ADC
Resolution, voltage (16 bits at 10 Hz notch filter)±10.5V: <320 μV/count(15 bits plus sign bipolar)0...10.5V: <160 μV/count(16 bits unipolar)0...5.25V: <80 μ/V count(16 bits unipolar)
Resolution, current (16 bits at 10 Hz notch filter0...21 mA: <0.32 ÎĽA/count(16 bits)3.6...21 mA: <0.32 ÎĽA/count(16 bits)
Calibrated accuracy at 25 °C (77 °F)Voltage: 0.05% full scaleCurrent: 0.05% full scale
Accuracy drift with temperatureVoltage: 28 ppm/ÂşCCurrent: 47 ppm/ÂşC
Scan Time Per channel, Per module625 ÎĽs, 2.5 ms

About 5094-OW8IXT

The Allen-Bradley 5094-OW8IXT module is a safety output module from the Allen-Bradley FLEX 5000 module series that has 4 isolated relay outputs. There are 2 outputs that are 2 Amps rated resistive channels that operate at 5 to 30 Volts DC or at 5 to 240 Volts AC at 50 to 60 Hertz frequency. There is also a single 2 Amps rated general channel that operates at 5 to 240 Volts AC at 50 to 60 Hertz frequency, and a single 2 Amps rated ATEX/IECEx that operates at 5 to 240 Volts AC at 50 to 60 Hertz frequency. The 5094-OW8IXT module’s outputs are not fused. The off-state leakage on the 5094-OW8IXT safety output module is 0 milliamps with dry contacts and no onboard snubbers and its maximum output current rating is 2 Amps per output channel.



 



The Allen-Bradley 5094-OW8IXT FLEX 5000 safety output module has 10 milliseconds of maximum off to on output delay time and an equal amount of maximum on to off output delay time. This output module can operate with AC or DC voltage in voltage ranges of 5 to 125 Volts DC or 5 to 240 Volts AC. Its maximum power dissipation rating 3.5 Watts and its maximum thermal dissipation 11.94 BTU/hour. The 5094-OW8IXT module uses Wire Category 1 for the signal ports and Wire Category 2 for the power ports. This safety output module can operate safely at a temperature between -40 and 158 degrees Fahrenheit. This wide temperature range allows the module to be used a variety of different industrial environments and applications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-OW8IXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote
Our team of highly skilled technicians can repair your Allen Bradley PLC5094-OW8IXT. All of our repairs come with a 1 Year warranty, please contact us for more information about our repair process.
PDF
5094-OW8IXT PDF