5094-RTB32C | Allen Bradley PLC FLEX 5000

5094-RTB32C

5094-RTB32C

Description: The Allen-Bradley/Rockwell Automation 5094-RTB32C removable terminal block has been manufactured as part of the Allen-Bradley Flex 5000 series. It is meant to be combined with a mounting base to form a complete terminal base or TB assembly. The 5094-RTB32C removable terminal block is compatible with the Allen-Bradley Flex 5000 series 5094-MB mounting base. It is a 32-point removable terminal block. The 5094-RTB32C removable terminal block can be used in normal industrial environments and in extreme industrial environments.
Rated 4.7 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-RTB32C

Add more parts to quote

Description: The Allen-Bradley/Rockwell Automation 5094-RTB32C removable terminal block has been manufactured as part of the Allen-Bradley Flex 5000 series. It is meant to be combined with a mounting base to form a complete terminal base or TB assembly. The 5094-RTB32C removable terminal block is compatible with the Allen-Bradley Flex 5000 series 5094-MB mounting base. It is a 32-point removable terminal block. The 5094-RTB32C removable terminal block can be used in normal industrial environments and in extreme industrial environments.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-RTB32C.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 7 reviews

    Technical Specifications for 5094-RTB32C

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB32C
DescriptionRemovable terminal block
CompatiblityFLEX 5000 modules
Wire Size22-14 AWG
Input Current100 milliamperes, 10 Volts DC
Temperature0-70 degrees Celsius
StandardsCE, T4
Shield BarIncluded
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB32C
DescriptionRemovable terminal block
CompatiblityFLEX 5000 modules
Wire Size22-14 AWG
Input Current100 milliamperes, 10 Volts DC
Temperature0-70 degrees Celsius
StandardsCE, T4
Shield BarIncluded
s

About 5094-RTB32C

The 5094-RTB32C terminal base is a FLEX 5000 terminal base assembly by Allen-Bradley/Rockwell Automation. It is an open enclosure block. The front section of the block comes with a shield bar. It comes with input/output terminals that is used for connections to input and output wiring, commons, power connections, and other power supplies. The block can be mounted by using I/O module guide rail. An RTB mounting screw is present on the top side of the block. An I/O edge connector is also present to connect with FLEX 5000 I/O modules. The 5094-RTB32C terminal base comes with a keyswitch that can be used to set the position of the module. The terminal block comes with an input rating of 100 milliamps with a voltage supply of 10 Volts DC. The terminal block uses a copper wire that is 22-14 AWG in size with a 105 degrees Celsius temperature rating. It offers maximum insulation.



 



The Allen-Bradley 5094-RTB32C terminal block comes with dimensions of 3.97 inches in height, 3.68 inches in width, and 3.99 inches in depth. This open enclosure block is certified with the T4 American code for temperature. The 5094-RTB32C terminal base is part of the terminal base assemblies of a complete FLEX 5000 module. The block can be used with different applications. The temperature of the block should not exceed 70 degrees Celsius for normal operation. The block can withstand vibrations of 5 G with 50 to 100 Hertz frequency, and shocks of 30 G for operating and non operating conditions. The 5094-RTB32C terminal base has a conformal coating on the outside for corrosion resistance and protection in harsh environments.



Technical Description of 5094-RTB32C

The 5094-RTB32C base is a 32-point output removable terminal base. It has been manufactured by Allen-Bradley.

Repair Services for 5094-RTB32C

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB32C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-RTB32C

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-RTB32C

Resolutions For 5094-RTB32C

About

Technical Specifications for 5094-RTB32C

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB32C
DescriptionRemovable terminal block
CompatiblityFLEX 5000 modules
Wire Size22-14 AWG
Input Current100 milliamperes, 10 Volts DC
Temperature0-70 degrees Celsius
StandardsCE, T4
Shield BarIncluded
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB32C
DescriptionRemovable terminal block
CompatiblityFLEX 5000 modules
Wire Size22-14 AWG
Input Current100 milliamperes, 10 Volts DC
Temperature0-70 degrees Celsius
StandardsCE, T4
Shield BarIncluded

About 5094-RTB32C

The 5094-RTB32C terminal base is a FLEX 5000 terminal base assembly by Allen-Bradley/Rockwell Automation. It is an open enclosure block. The front section of the block comes with a shield bar. It comes with input/output terminals that is used for connections to input and output wiring, commons, power connections, and other power supplies. The block can be mounted by using I/O module guide rail. An RTB mounting screw is present on the top side of the block. An I/O edge connector is also present to connect with FLEX 5000 I/O modules. The 5094-RTB32C terminal base comes with a keyswitch that can be used to set the position of the module. The terminal block comes with an input rating of 100 milliamps with a voltage supply of 10 Volts DC. The terminal block uses a copper wire that is 22-14 AWG in size with a 105 degrees Celsius temperature rating. It offers maximum insulation.



 



The Allen-Bradley 5094-RTB32C terminal block comes with dimensions of 3.97 inches in height, 3.68 inches in width, and 3.99 inches in depth. This open enclosure block is certified with the T4 American code for temperature. The 5094-RTB32C terminal base is part of the terminal base assemblies of a complete FLEX 5000 module. The block can be used with different applications. The temperature of the block should not exceed 70 degrees Celsius for normal operation. The block can withstand vibrations of 5 G with 50 to 100 Hertz frequency, and shocks of 30 G for operating and non operating conditions. The 5094-RTB32C terminal base has a conformal coating on the outside for corrosion resistance and protection in harsh environments.



Technical Description of 5094-RTB32C

The 5094-RTB32C base is a 32-point output removable terminal base. It has been manufactured by Allen-Bradley.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB32C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB32C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF