The 5094-RTB32VS Removable Terminal Block is a 32-input spring-type terminal block module designed by Allen-Bradley/Rockwell Automation. It is recommended to use this module in non-extreme environments. This terminal block is notable for its compact and flexible design. The 5094-RTB32VS Removable Terminal Block has CE and RMC certifications to show that it meets all the relevant industrial standards. The ATEX temperature code ratubg of the module is T4. The 5094-TB32VS Terminal Base is the compatible terminal base assembly that can be used with this terminal block module. The users must order the mounting base and the RTB module separately in order to build the complete terminal base assembly. The 5094-RTB32VS Removable Terminal Block comes with 250 Volts of channel to chassis isolation voltage and 250 Volts of SA to chassis isolation voltage. It accepts copper wires with 22 to 14 AWG wire sizes.

The 5094-RTB32VS Removable Terminal Block is compatible with sinking type input modules such as the 5094-IB32 and 5094-IB32XT input modules which have 10 to 32 Volts DC of input voltage, 15 Volts DC of backplane power voltage and 90 milliamps of backplane power current. Before selecting the RTB, it is essential to consider the I/O module requirements. The power RTB which is connected to the external power supply provides the required power to the FLEX 5000 I/O system. Make sure to select a certified power supply as the external power supply. It is essential to have a FLEX 5000 Ethernet/IP adapter and backplane end caps to successfully install the complete terminal base assembly in an industrial application. The RTB and the mounting base can be easily assembled in 3 steps. First, insert the mounting hooks into the holes at the bottom of the mounting base. Then pivot the RTB toward the mounting base until it aligns with the outline of the MB. Finally, use a screwdriver and turn the captive mounting screws clockwise.