DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 5094-RTB3AC Removable Terminal Block is an AC screw-type terminal block made by Allen-Bradley/Rockwell Automation. It comes with 2 Amps of I/O current at 240 Volts AC, an open-style enclosure, and 50/60 Hertz frequency ratings.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 5094-RTB3AC. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3AC |
Product Description | Removable Terminal Block |
Input/Output Ratings | 2 Amps at 240 Volts AC |
Sensor Actuator Power | 10 Amps at 240 Volts AC |
Frequency Ratings | 50/60 Hertz |
Isolation Voltage | 250 Volts continuous |
Wire Type | Copper |
Wire Size | 14-22 AWG |
Enclosure Type Rating | Open-style |
Compatible Terminal Base Assembly | 5094-TB3AC |
Compatible Mounting Base | 5094-MB |
Dimensions (HxWxD) | 53.0 x 94.0 x 76.0 mm |
Weight (approx.) | 202 g |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3AC |
Product Description | Removable Terminal Block |
Input/Output Ratings | 2 Amps at 240 Volts AC |
Sensor Actuator Power | 10 Amps at 240 Volts AC |
Frequency Ratings | 50/60 Hertz |
Isolation Voltage | 250 Volts continuous |
Wire Type | Copper |
Wire Size | 14-22 AWG |
Enclosure Type Rating | Open-style |
Compatible Terminal Base Assembly | 5094-TB3AC |
Compatible Mounting Base | 5094-MB |
Dimensions (HxWxD) | 53.0 x 94.0 x 76.0 mm |
Weight (approx.) | 202 g |
The 5094-RTB3AC Removable Terminal Block or RTB is an Allen-Bradley terminal block that belongs to the FLEX 5000 product line. This AC screw-type removable terminal block can only be used in non-extreme environments. Some of the environmental specifications of the module include a -40 to 70 degrees Celsius storage temperature range, a 5 to 95% range of tolerable non-condensing relative humidity, and 5 g of maximum tolerable vibration at 10 to 50 Hertz. The compatible mounting base of this module is the 5094-MB mounting base. This screw-type terminal block accepts copper wires with 12 millimeters (+/- 1 millimeters) of insulation stripping length. The torque specification of the terminal block is 0.4 N-m. The system-side power and field-side power in the system are provided by the 5094-RTB3AC Removable Terminal Block.
The 5094-RTB3AC Removable Terminal Block can be used with the 5094-OA16 and 5094-OA16XT output modules which have 85 to 264 Volts AC of SA voltage range at a 47 to 63 Hertz frequency range and at 3.5 Watts of rated power dissipation. If the FLEX 5000 I/O system is facing a power problem, it is advised to verify that the RTB is properly seated in the adapter. The essential components that are needed for the terminal base assembly installation include a DIN rail, a mounting base, the RTB, a shield bar, and the SA power jumpers. When connecting the wires to the screw-type terminals, a screwdriver must be used to close the terminals with 0.4 N-m of torque. The wire removal process is simple because the users only have to turn the screwdriver counterclockwise to open the terminal. The 5094-RTB3AC Removable Terminal Block can be used to expand applications and systems in different industries.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 5094-RTB3AC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3AC |
Product Description | Removable Terminal Block |
Input/Output Ratings | 2 Amps at 240 Volts AC |
Sensor Actuator Power | 10 Amps at 240 Volts AC |
Frequency Ratings | 50/60 Hertz |
Isolation Voltage | 250 Volts continuous |
Wire Type | Copper |
Wire Size | 14-22 AWG |
Enclosure Type Rating | Open-style |
Compatible Terminal Base Assembly | 5094-TB3AC |
Compatible Mounting Base | 5094-MB |
Dimensions (HxWxD) | 53.0 x 94.0 x 76.0 mm |
Weight (approx.) | 202 g |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3AC |
Product Description | Removable Terminal Block |
Input/Output Ratings | 2 Amps at 240 Volts AC |
Sensor Actuator Power | 10 Amps at 240 Volts AC |
Frequency Ratings | 50/60 Hertz |
Isolation Voltage | 250 Volts continuous |
Wire Type | Copper |
Wire Size | 14-22 AWG |
Enclosure Type Rating | Open-style |
Compatible Terminal Base Assembly | 5094-TB3AC |
Compatible Mounting Base | 5094-MB |
Dimensions (HxWxD) | 53.0 x 94.0 x 76.0 mm |
Weight (approx.) | 202 g |
The 5094-RTB3AC Removable Terminal Block or RTB is an Allen-Bradley terminal block that belongs to the FLEX 5000 product line. This AC screw-type removable terminal block can only be used in non-extreme environments. Some of the environmental specifications of the module include a -40 to 70 degrees Celsius storage temperature range, a 5 to 95% range of tolerable non-condensing relative humidity, and 5 g of maximum tolerable vibration at 10 to 50 Hertz. The compatible mounting base of this module is the 5094-MB mounting base. This screw-type terminal block accepts copper wires with 12 millimeters (+/- 1 millimeters) of insulation stripping length. The torque specification of the terminal block is 0.4 N-m. The system-side power and field-side power in the system are provided by the 5094-RTB3AC Removable Terminal Block.
The 5094-RTB3AC Removable Terminal Block can be used with the 5094-OA16 and 5094-OA16XT output modules which have 85 to 264 Volts AC of SA voltage range at a 47 to 63 Hertz frequency range and at 3.5 Watts of rated power dissipation. If the FLEX 5000 I/O system is facing a power problem, it is advised to verify that the RTB is properly seated in the adapter. The essential components that are needed for the terminal base assembly installation include a DIN rail, a mounting base, the RTB, a shield bar, and the SA power jumpers. When connecting the wires to the screw-type terminals, a screwdriver must be used to close the terminals with 0.4 N-m of torque. The wire removal process is simple because the users only have to turn the screwdriver counterclockwise to open the terminal. The 5094-RTB3AC Removable Terminal Block can be used to expand applications and systems in different industries.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 5094-RTB3AC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 5094-RTB3AC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.