The 5094-RTB3ISXT removable terminal block is an individual removable terminal block for the Allen-Bradley Flex 5000 I/O control system. The 5094-RTB3ISXT removable terminal block and a separately sold mounting base make up a complete terminal base assembly, which is then mounted on a zinc-plated chromate-passivated steel-type DIN rail. Each Flex 5000 I/O module requires an I/O terminal base for field-side wiring. The 5094-RTB3ISXT removable terminal block comes with a spring-type terminal that allows for simplified field-side wiring. It also has a wear-resistant design that makes it suitable for use even in tough and extreme industrial applications. The 5094-RTB3ISXT removable terminal block has an acceptable input voltage range of 18.0 Volts DC to 32.0 Volts DC and a nominal voltage rating of 32 Volts DC. It has a maximum current rating of 2.0 Amps at 32 Volts DC (per channel) and a maximum sensor pass-through current draw of 10 Amps per module.

The 5094-RTB3ISXT removable terminal block has built-in isolation between the I/O channel common and the chassis. Each 5094-RTB3ISXT removable terminal block spring-type terminal has 0.3 to 1.5 millimeters square (22 to 16 AWG) wire gauge, and it has a factory rated 250 Volts AC isolation voltage rating between the I/O channels and chassis and between the sensor actuator and I/O chassis. The 5094-RTB3ISXT removable terminal block has an I/O edge connector that ensures that each I/O module is installed properly, and the I/O installation position is configured by using key switches. The 5094-RTB3ISXT removable terminal block comes with an open design, and it has a T4 ATEX and ECEx rated temperature code. It has a shipping weight of 202 grams and approximate dimensions of 53.0 x 94.0 x 76.0 millimeters.