5094-RTB3IXT

The Allen-Bradley 5094-RTB3IXT removable terminal block is a removable terminal block with built-in channel isolation and screw-type terminals. The 5094-RTB3IXT removable terminal block belongs to the high-performance, compact, and cost-effective Flex 5000 I/O terminal base system, which offers easy and simplified I/O module installation processes with its mounting bases as well as with its field-side wiring. The complete Flex 5000 I/O terminal base assembly is DIN rail-supported and it comprises the removable terminal block and a mounting base which can be ordered separately. On the front of the 5094-RTB3IXT removable terminal block are a set of key switches that are used for properly setting and adjusting the module position after installation, and on the rear-side is a shield bar for wiring shields on all the analog I/O modules.

The 5094-RTB3IXT removable terminal block has an operating voltage range between 18 and 32 Volts DC and a nominal voltage rating of 32 Volts DC. It has a maximum I/O current rating of 2.0 Amps (at 32 Volts DC) and a sensor-actuator/module current draw rating of 10.0 Amps. The 5094-RTB3IXT removable terminal block has individually-isolated I/O channels and 250 Volts AC continuous rated isolation voltage between the chassis and channels and the SA and chassis. Each 5094-RTB3IXT removable terminal block has 1.2-millimeter thick insulation that protects against contact with outside conductors, and the terminals have solid copper wire with 0.3 x 2.5 millimeters square average wire size. The 5094-RTB3IXT removable terminal block has an open design, but it is structurally coated to withstand harsh and extreme industrial environments. It has a rated operating temperature range of -40 to 70 degrees Celsius, with 5 to 95% relative humidity, and a storage temperature range of -40 to 85 degrees Celsius.