5094-RTB3TS | Allen Bradley PLC FLEX 5000

5094-RTB3TS

5094-RTB3TS

Description:

The Allen-Bradley 5094-RTB3TS Flex 5000 CJC Removable Terminal Block is made for the Flex 5000 I/O System. This removable terminal block has spring-type terminals and an embedded CJC thermistor.

Rated 4.6 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5094-RTB3TS

Add more parts to quote

Description:

The Allen-Bradley 5094-RTB3TS Flex 5000 CJC Removable Terminal Block is made for the Flex 5000 I/O System. This removable terminal block has spring-type terminals and an embedded CJC thermistor.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5094-RTB3TS.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 18 reviews

    Technical Specifications for 5094-RTB3TS

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3TS
Product TypeFlex 5000 CJC Removable Terminal Block
ApplicationFlex 5000 I/O Applications
Current Rating100 milliamps
Sensor Actuator Rating10.0 Amps
Voltage Range10 to 32 Volts DC
Embedded CJC ThermistorYes
Terminal TypeSpring-Type
ConductorSolid/Stranded Copper Wire
Average Weight202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3TS
Product TypeFlex 5000 CJC Removable Terminal Block
ApplicationFlex 5000 I/O Applications
Current Rating100 milliamps
Sensor Actuator Rating10.0 Amps
Voltage Range10 to 32 Volts DC
Embedded CJC ThermistorYes
Terminal TypeSpring-Type
ConductorSolid/Stranded Copper Wire
Average Weight202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters
s

About 5094-RTB3TS

The Allen-Bradley 5094-RTB3TS Removable Terminal Block is a Cold Junction Compensation (CJC) removable terminal block for the Flex 5000 I/O system. This terminal block belongs to the Flex 5000 terminal base assembly series, which provides base terminations for Flex I/O modules and connections for the field-side wiring. The 5094-RTB3TS Removable Terminal Block together with a suitable mounting base makes up the complete Flex 5000 terminal base assembly. Both the terminal block and the mounting base can each be ordered separately. The 5094-RTB3TS Removable Terminal Block has a front-panel I/O edge connector and I/O module guide rail for holding the modules securely in place and several key switches for setting the module into the correct installed position. It has a rear-ended shield bar for wiring the high-speed counter module and analog I/O module terminal bases.



 



The 5094-RTB3TS Removable Terminal Block has a maximum input current rating of 100 milliamps and an SSV (sensor sourcing voltage) output rating of 1.8 Amps at 24 Volts DC. The 5094-RTB3TS Removable Terminal Block has a maximum module current rating of 10 Amps and an operating voltage rating of 18 to 32 Volts DC. This terminal block has basic insulation surrounding every conductor, and it has 250 Volts AC of continuous channels to chassis and SA to chassis isolation. It has spring-type terminals (1 per channel) for linking the I/O SSV wiring, connecting commons, backplane power, customer-supplied power, and the embedded CJC thermistor within the terminal block. The 5094-RTB3TS Removable Terminal Block has ATEX, NA, and IECx T4 temperature code ratings and it comes with an open style design that supports industrial enclosures. The 5094-RTB3TS Removable Terminal Block is c-UL-us, CE, RCM, Ex, IECEx, and KCC certified. It has an ambient operating temperature range between -40 and 70 degrees Celsius in a 5 to 95% non-condensing relative humidity range.



Repair Services for 5094-RTB3TS

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB3TS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5094-RTB3TS

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5094-RTB3TS

Resolutions For 5094-RTB3TS

About

Technical Specifications for 5094-RTB3TS

BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3TS
Product TypeFlex 5000 CJC Removable Terminal Block
ApplicationFlex 5000 I/O Applications
Current Rating100 milliamps
Sensor Actuator Rating10.0 Amps
Voltage Range10 to 32 Volts DC
Embedded CJC ThermistorYes
Terminal TypeSpring-Type
ConductorSolid/Stranded Copper Wire
Average Weight202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters
BrandAllen-Bradley / Rockwell Automation
SeriesFLEX 5000
Part Number5094-RTB3TS
Product TypeFlex 5000 CJC Removable Terminal Block
ApplicationFlex 5000 I/O Applications
Current Rating100 milliamps
Sensor Actuator Rating10.0 Amps
Voltage Range10 to 32 Volts DC
Embedded CJC ThermistorYes
Terminal TypeSpring-Type
ConductorSolid/Stranded Copper Wire
Average Weight202 Grams
Approximate Dimensions53.0 x 94.0 x 76.0 Millimeters

About 5094-RTB3TS

The Allen-Bradley 5094-RTB3TS Removable Terminal Block is a Cold Junction Compensation (CJC) removable terminal block for the Flex 5000 I/O system. This terminal block belongs to the Flex 5000 terminal base assembly series, which provides base terminations for Flex I/O modules and connections for the field-side wiring. The 5094-RTB3TS Removable Terminal Block together with a suitable mounting base makes up the complete Flex 5000 terminal base assembly. Both the terminal block and the mounting base can each be ordered separately. The 5094-RTB3TS Removable Terminal Block has a front-panel I/O edge connector and I/O module guide rail for holding the modules securely in place and several key switches for setting the module into the correct installed position. It has a rear-ended shield bar for wiring the high-speed counter module and analog I/O module terminal bases.



 



The 5094-RTB3TS Removable Terminal Block has a maximum input current rating of 100 milliamps and an SSV (sensor sourcing voltage) output rating of 1.8 Amps at 24 Volts DC. The 5094-RTB3TS Removable Terminal Block has a maximum module current rating of 10 Amps and an operating voltage rating of 18 to 32 Volts DC. This terminal block has basic insulation surrounding every conductor, and it has 250 Volts AC of continuous channels to chassis and SA to chassis isolation. It has spring-type terminals (1 per channel) for linking the I/O SSV wiring, connecting commons, backplane power, customer-supplied power, and the embedded CJC thermistor within the terminal block. The 5094-RTB3TS Removable Terminal Block has ATEX, NA, and IECx T4 temperature code ratings and it comes with an open style design that supports industrial enclosures. The 5094-RTB3TS Removable Terminal Block is c-UL-us, CE, RCM, Ex, IECEx, and KCC certified. It has an ambient operating temperature range between -40 and 70 degrees Celsius in a 5 to 95% non-condensing relative humidity range.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB3TS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5094-RTB3TS. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF