DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 5094-RTB3W block is a removabe terminal block. The 5094-RTB3W terminal is part of the FLEX 5000 I/O product line.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 5094-RTB3W. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3W |
Product Type | Removable terminal block |
Maximum SA Power | 10 Amps @ 18 - 32 Volts DC |
Max Output Rating | 2 Amps @ 125 Volts DC / 240 Volts AC |
Isolation Voltage | 250 Volts |
Wire Type | Copper |
Wire Size | 22 to 14 AWG |
Weight | 202 grams |
ATEX Temperature Code | T4 |
Operating Temperature | -40 to 158 degrees Fahrenheit |
Maximum Altitude | 2000 meters |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3W |
Product Type | Removable terminal block |
Maximum SA Power | 10 Amps @ 18 - 32 Volts DC |
Max Output Rating | 2 Amps @ 125 Volts DC / 240 Volts AC |
Isolation Voltage | 250 Volts |
Wire Type | Copper |
Wire Size | 22 to 14 AWG |
Weight | 202 grams |
ATEX Temperature Code | T4 |
Operating Temperature | -40 to 158 degrees Fahrenheit |
Maximum Altitude | 2000 meters |
The 5094-RTB3W block is an Allen-Bradley removable terminal block. The 5094-RTB3W terminal block is part of the FLEX 5000 terminal base assembly modules from Allen-Bradley. The FLEX 5000 terminal base assemblies are comprised of a mounting base and a removable terminal block. Terminal base assemblies are required as the terminal bases for Allen-Bradley FLEX 5000 I/O modules. FLEX 5000 I/Os are used with Logix 5000 controllers. The maximum sensor actuator power for the 5094-RTB3W terminal block is 10 Amps at 18 to 32 Volts DC. The maximum output ratings are 2 Amps at 125 Volts DC and 2 Amps at 240 Volts AC (50 to 60 Hertz). The maximum altitude at which the 5094-RTB3W terminal block should be installated is 2000 meters.
The operating temperature range for the 5094-RTB3W terminal block is -40 to 158 degrees Fahrenheit. More than 1 conductor should not be used to wire any terminal. The 5094-RTB3W terminal block is not resistant to sunlight or to other UV radiation sources. The 5094-RTB3W terminal block should be mounted in an enclosure which is ATEX/IECEx Zone 2 certified and which has an ingress protection rating of IP 54 at a minimum. THe equipment should not be installed or disconnected while power is switched on. The 5094-RTB3W terminal block is ESD-sensitive and therefore the following precautions should be followed while handling it: potential static should be discharged by touching a grounded object, an approved wriststrap should be worn, touching of pins or connectors on the boards should be avoided, and static-safe workstations should be used.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 5094-RTB3W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3W |
Product Type | Removable terminal block |
Maximum SA Power | 10 Amps @ 18 - 32 Volts DC |
Max Output Rating | 2 Amps @ 125 Volts DC / 240 Volts AC |
Isolation Voltage | 250 Volts |
Wire Type | Copper |
Wire Size | 22 to 14 AWG |
Weight | 202 grams |
ATEX Temperature Code | T4 |
Operating Temperature | -40 to 158 degrees Fahrenheit |
Maximum Altitude | 2000 meters |
Brand | Allen-Bradley / Rockwell Automation |
Series | FLEX 5000 |
Part Number | 5094-RTB3W |
Product Type | Removable terminal block |
Maximum SA Power | 10 Amps @ 18 - 32 Volts DC |
Max Output Rating | 2 Amps @ 125 Volts DC / 240 Volts AC |
Isolation Voltage | 250 Volts |
Wire Type | Copper |
Wire Size | 22 to 14 AWG |
Weight | 202 grams |
ATEX Temperature Code | T4 |
Operating Temperature | -40 to 158 degrees Fahrenheit |
Maximum Altitude | 2000 meters |
The 5094-RTB3W block is an Allen-Bradley removable terminal block. The 5094-RTB3W terminal block is part of the FLEX 5000 terminal base assembly modules from Allen-Bradley. The FLEX 5000 terminal base assemblies are comprised of a mounting base and a removable terminal block. Terminal base assemblies are required as the terminal bases for Allen-Bradley FLEX 5000 I/O modules. FLEX 5000 I/Os are used with Logix 5000 controllers. The maximum sensor actuator power for the 5094-RTB3W terminal block is 10 Amps at 18 to 32 Volts DC. The maximum output ratings are 2 Amps at 125 Volts DC and 2 Amps at 240 Volts AC (50 to 60 Hertz). The maximum altitude at which the 5094-RTB3W terminal block should be installated is 2000 meters.
The operating temperature range for the 5094-RTB3W terminal block is -40 to 158 degrees Fahrenheit. More than 1 conductor should not be used to wire any terminal. The 5094-RTB3W terminal block is not resistant to sunlight or to other UV radiation sources. The 5094-RTB3W terminal block should be mounted in an enclosure which is ATEX/IECEx Zone 2 certified and which has an ingress protection rating of IP 54 at a minimum. THe equipment should not be installed or disconnected while power is switched on. The 5094-RTB3W terminal block is ESD-sensitive and therefore the following precautions should be followed while handling it: potential static should be discharged by touching a grounded object, an approved wriststrap should be worn, touching of pins or connectors on the boards should be avoided, and static-safe workstations should be used.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 5094-RTB3W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 5094-RTB3W. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.