The 5094-SAJMPR-QTY10 kit is an accessory kit containing 10 SA power jumpers. The individual 5094-SAJMPR power jumpers are designed to enable daisy chaining on screw-type terminal bases. The 5094-SAJMPR jumpers from the 5094-SAJMPR-QTY10 kit can be installed by straddling 2 terminal bases and then tightening the screws to the same torque as the wires. To remove a 5094-SAJMPR power jumper, the screws for the jumper need to be unscrewed and then the jumper can be lifted off the terminal base. The 5094-SAJMPR-QTY10 pack is sold separately from the terminal bases and it can be ordered from Allen-Bradley. The 5094-SAJMPR power jumpers cannot be used on spring-type terminal bases. The maximum voltage and current ratings for the 5094-SAJMPR power jumpers are 300 Volts AC and 10 Amps, respectively. The recommended operating and non-operating temperature ranges for the jumpers are from -40 to 158 degrees Fahrenheit and -40 to 185 degrees Fahrenheit, respectively.

The 5094-SAJMPR power jumpers and the complete 5094-SAJMPR-QTY10 kit are part of the FLEX 5000 I/O module family from Allen-Bradley. This family of products contains digital I/O modules, analog I/O modules, specialty modules, safety digital I/O modules, mounting bases, removal terminal blocks, and accessories. Multiple Logix 5000 controllers such as the ControlLogix 5580 and CompactLogix 5380 controllers can use FLEX 5000 I/O modules. I/O modules from the FLEX 5000 series require a terminal base to connect to the field-side wiring. The 2 components of terminal bases are mounting bases and removable terminal blocks, and these components are sold separately by Allen-Bradley.