1794-OE8H | Allen Bradley PLC Flex I/O 1794

1794-OE8H

Rated 4.5 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1794-OE8H

Description: The 1794-OE8H analog module from Allen-Bradley is a FLEX I/O HART module.
Available Now
Request a quote for 1794-OE8H

Description:

The 1794-OE8H analog module from Allen-Bradley is a FLEX I/O HART module.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1794-OE8H.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 12 reviews

    Technical Specifications for 1794-OE8H

BrandAllen-Bradley / Rockwell Automation
SeriesFlex I/O 1794
Part Number1794-OE8H
Product typeFLEX I/O HART module
Number of outputs8
Output typeanalog
Output current range0 to 20 mA or 4 to 20 mA
Ambient temperature25 degrees Celsius
Channel connectionsElectrical
IndicatorsPower and I/O indicators
BrandAllen-Bradley / Rockwell Automation
SeriesFlex I/O 1794
Part Number1794-OE8H
Product typeFLEX I/O HART module
Number of outputs8
Output typeanalog
Output current range0 to 20 mA or 4 to 20 mA
Ambient temperature25 degrees Celsius
Channel connectionsElectrical
IndicatorsPower and I/O indicators
s

About 1794-OE8H

The 1794-OE8H analog module from Allen-Bradley is a FLEX I/O HART module. The 1794-OE8H I/O module is specifically an output module for industrial machines. It has 8 analog outputs that are not isolated. The default current range for these outputs is a range of 0 to 20 milliamps but the current range can be set to 4 to 20 milliamps if the connections or applications require it. The 1794-OE8H I/O module has local microprocessor intelligence, lead breakage detection, several data ranges, alarms for remote transmitters and overrange and underrange situations, and it is capable of full functioning without the use of jumpers or switches. This module can be mounted on a terminal base unit with a keyswitch that can be rotated until the module locks into place on the terminal base. Once the terminal base unit has been wired, the position of the keyswitch should not be changed again.



 



The Allen-Bradley 1794-OE8H FLEX I/O HART module can control an analog field device. It has channels that are electrically connected. The module's status indicators show the users whether the module is powered on or off and whether the I/O are being used or not. If there are any problems with the 1794-OE8H I/O module, it cannot be repaired in the field and it must be replaced or sent back to the factory for repair by the manufacturer. Its ambient temperature rating is 25 degrees Celsius, plus or minus 5 degrees.

Repair Services for 1794-OE8H

Type Lead Time Price Action
Repair Service 2-4 weeks $3178cartAdd to Cart

Our highly skilled technicians can repair your 1794-OE8H. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 1794-OE8H

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1794-OE8H

Resolutions For 1794-OE8H

About

Technical Specifications for 1794-OE8H

BrandAllen-Bradley / Rockwell Automation
SeriesFlex I/O 1794
Part Number1794-OE8H
Product typeFLEX I/O HART module
Number of outputs8
Output typeanalog
Output current range0 to 20 mA or 4 to 20 mA
Ambient temperature25 degrees Celsius
Channel connectionsElectrical
IndicatorsPower and I/O indicators
BrandAllen-Bradley / Rockwell Automation
SeriesFlex I/O 1794
Part Number1794-OE8H
Product typeFLEX I/O HART module
Number of outputs8
Output typeanalog
Output current range0 to 20 mA or 4 to 20 mA
Ambient temperature25 degrees Celsius
Channel connectionsElectrical
IndicatorsPower and I/O indicators

About 1794-OE8H

The 1794-OE8H analog module from Allen-Bradley is a FLEX I/O HART module. The 1794-OE8H I/O module is specifically an output module for industrial machines. It has 8 analog outputs that are not isolated. The default current range for these outputs is a range of 0 to 20 milliamps but the current range can be set to 4 to 20 milliamps if the connections or applications require it. The 1794-OE8H I/O module has local microprocessor intelligence, lead breakage detection, several data ranges, alarms for remote transmitters and overrange and underrange situations, and it is capable of full functioning without the use of jumpers or switches. This module can be mounted on a terminal base unit with a keyswitch that can be rotated until the module locks into place on the terminal base. Once the terminal base unit has been wired, the position of the keyswitch should not be changed again.



 



The Allen-Bradley 1794-OE8H FLEX I/O HART module can control an analog field device. It has channels that are electrically connected. The module's status indicators show the users whether the module is powered on or off and whether the I/O are being used or not. If there are any problems with the 1794-OE8H I/O module, it cannot be repaired in the field and it must be replaced or sent back to the factory for repair by the manufacturer. Its ambient temperature rating is 25 degrees Celsius, plus or minus 5 degrees.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $3178cartAdd to Cart

Our highly skilled technicians can repair your 1794-OE8H. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $3178cartAdd to Cart

Our highly skilled technicians can repair your 1794-OE8H. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF