1794-OF8IH | Allen Bradley PLC Flex I/O 1794

1794-OF8IH

Rated 4.6 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

1794-OF8IH

Description: The Allen-Bradley 1794-OF8IH is a Flex I/O module. This module is an Isolated Output HART Analog Module that is part of the 1794 Flex I/O system. This module has Eight (8) 8 single-ended, isolated outputs, configurable for 0-20 mA and 4-20 mA with 16-bit resolution.
Call
Request a quote for 1794-OF8IH

Description: The Allen-Bradley 1794-OF8IH is a Flex I/O module. This module is an Isolated Output HART Analog Module that is part of the 1794 Flex I/O system. This module has Eight (8) 8 single-ended, isolated outputs, configurable for 0-20 mA and 4-20 mA with 16-bit resolution.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 1794-OF8IH.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 5 reviews

    Technical Specifications for 1794-OF8IH

No. of Outputs:Eight (8) Isolated outputs
Thermal dissipation, max:17.06 BTU/hr @ 24V DC
Power dissipation, max:5.0 W @ 24V DC
Flexbus current:80 mA @ 5V DC
Calibration:Factory Calibrated
Terminal Base:1794-TB3, 1794-TB3S
Data format:Engineering Units; Percent of Full Scale; RAW/Proportional Count
Conversion rate:10 ms
Conversion method:16-bits digital to analog converter
Module Resolution:16-Bit; Unipolar
Output signals:0-20 mA; 4-20 mA
BrandAllen-Bradley
Product Description:Flex IO Isolated Analog Output HART Module
Manufacturer:Rockwell Automation
Part Number1794-OF8IH
SeriesFlex I/O 1794
Product typeOutput module
Outputs8
Pass-through message supportYes
Output current0 to 20 mA or 4 to 20 mA
Data conversion rate10 milliseconds
Operating temperature32 to 131 degrees Fahrenheit
No. of Outputs:Eight (8) Isolated outputs
Thermal dissipation, max:17.06 BTU/hr @ 24V DC
Power dissipation, max:5.0 W @ 24V DC
Flexbus current:80 mA @ 5V DC
Calibration:Factory Calibrated
Terminal Base:1794-TB3, 1794-TB3S
Data format:Engineering Units; Percent of Full Scale; RAW/Proportional Count
Conversion rate:10 ms
Conversion method:16-bits digital to analog converter
Module Resolution:16-Bit; Unipolar
Output signals:0-20 mA; 4-20 mA
BrandAllen-Bradley
Product Description:Flex IO Isolated Analog Output HART Module
Manufacturer:Rockwell Automation
Part Number1794-OF8IH
SeriesFlex I/O 1794
Product typeOutput module
Outputs8
Pass-through message supportYes
Output current0 to 20 mA or 4 to 20 mA
Data conversion rate10 milliseconds
Operating temperature32 to 131 degrees Fahrenheit
s

About 1794-OF8IH

The Allen-Bradley 1794-OF8IH module is made by Allen-Bradley/Rockwell Automation as a FLEX I/O module. TheAllen-Bradley1794-OF8IH FLEX I/O module is an output module with HART capability. It comes with up to 8 analog outputs that are configurable for 0 to 20 mA and 4 to 20 mA. The 1794-OF8IH module can be used without jumpers and switches and it has multiple data ranges that the users can program independently on each channel. This output module can also detect lead breakages and it has alarms for overrange and underrange current situations.

The Allen-Bradley 1794-OF8IH output module can be installed on a terminal base with. It locks to the terminal base when the keyswitch is rotated into position 4. This module supports pass-through messages with 1 or 2 pass-through connections supporting 8 queues per connection. Pass-through messages make it possible for the module to send HART messages to HART devices. Its data conversion rate is 10 milliseconds. The Allen-Bradley 1794-OF8IH module can operate in a temperature range of 32 to 131 degrees Fahrenheit.

This modules comes with Eight (8) analog output channels that are configurable for Current output such as 0-20 mA and 4-20 mA output signals. It has a resolution of 16 bits in unipolar format with actual resolution of 0.305 ?A/cnt. It uses an internal conversion rate of 10 ms with conversion rate of 16-bits digital to analog converter. The module channel’s settling time is 70 ms.

This module does not require an external power supply to be operated. It receives power from the FlexBus current with rated value of 80 mA @ 5V DC. This module has a maximum power dissipation of 5.0 W @ 24V DC and maximum Thermal dissipation 17.06 BTU/hr @ 24V DC.

This Flex I/O module is compatible for installation in 1794-TB3, 1794-TB3S terminal bases. It is factory calibrated and requires keyswitch position 4 when installing to the appropriate terminal base. Additionally, the wire type for use with this module depends on the type of the terminal base used by the 1794-OF8IH module.

This module has a dedicated register for HART data. This register is a 6 WORD register that contains the Fields Device, HART Communication, Loop Status, and primary value in IEEE 754-1985 Single-Precision 32-bit floating point.

FAQ for 1794-OF8IH

How many output channels does the 1794-OF8IH have?


The 1794-OF8IH has Eight (8) analog output channels.

What are the supported output signal types of this output module?


The 1794-OF8IH supports 0-20 mA and 4-20 mA output signals.

What is the resolution of the 1794-OF8IH?


The 1794-OF8IH has 16-bit resolution.

Technical Description of 1794-OF8IH

The Allen-Bradley 1794-OF8IH module is made by Allen-Bradley/Rockwell Automation as a FLEX I/O module. The Allen-Bradley 1794-OF8IH module can be used without jumpers and switches and it has multiple data ranges that the users can program independently on each channel.

Repair Services for 1794-OF8IH

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1794-OF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Reviews for 1794-OF8IH

Internal Review

"The 1794-OF8IH is an analog output module that is capable of providing 0-20 mA and 4-20 mA signals. This module has special capability as it supports Highway Addressable remote Transducer (HART) protocol, compared to standard analog output modules. With the HART protocol, this module acts as multiplexers, routing signals to the controller and the connected HART device. Additionally, it can receive configuration and command through the HART communication that is connected by the same protocol. " -DO Supply Tech

Dimensions For 1794-OF8IH

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 1794-OF8IH

Resolutions For 1794-OF8IH

About

Technical Specifications for 1794-OF8IH

No. of Outputs:Eight (8) Isolated outputs
Thermal dissipation, max:17.06 BTU/hr @ 24V DC
Power dissipation, max:5.0 W @ 24V DC
Flexbus current:80 mA @ 5V DC
Calibration:Factory Calibrated
Terminal Base:1794-TB3, 1794-TB3S
Data format:Engineering Units; Percent of Full Scale; RAW/Proportional Count
Conversion rate:10 ms
Conversion method:16-bits digital to analog converter
Module Resolution:16-Bit; Unipolar
Output signals:0-20 mA; 4-20 mA
BrandAllen-Bradley
Product Description:Flex IO Isolated Analog Output HART Module
Manufacturer:Rockwell Automation
Part Number1794-OF8IH
SeriesFlex I/O 1794
Product typeOutput module
Outputs8
Pass-through message supportYes
Output current0 to 20 mA or 4 to 20 mA
Data conversion rate10 milliseconds
Operating temperature32 to 131 degrees Fahrenheit
No. of Outputs:Eight (8) Isolated outputs
Thermal dissipation, max:17.06 BTU/hr @ 24V DC
Power dissipation, max:5.0 W @ 24V DC
Flexbus current:80 mA @ 5V DC
Calibration:Factory Calibrated
Terminal Base:1794-TB3, 1794-TB3S
Data format:Engineering Units; Percent of Full Scale; RAW/Proportional Count
Conversion rate:10 ms
Conversion method:16-bits digital to analog converter
Module Resolution:16-Bit; Unipolar
Output signals:0-20 mA; 4-20 mA
BrandAllen-Bradley
Product Description:Flex IO Isolated Analog Output HART Module
Manufacturer:Rockwell Automation
Part Number1794-OF8IH
SeriesFlex I/O 1794
Product typeOutput module
Outputs8
Pass-through message supportYes
Output current0 to 20 mA or 4 to 20 mA
Data conversion rate10 milliseconds
Operating temperature32 to 131 degrees Fahrenheit

About 1794-OF8IH

The Allen-Bradley 1794-OF8IH module is made by Allen-Bradley/Rockwell Automation as a FLEX I/O module. TheAllen-Bradley1794-OF8IH FLEX I/O module is an output module with HART capability. It comes with up to 8 analog outputs that are configurable for 0 to 20 mA and 4 to 20 mA. The 1794-OF8IH module can be used without jumpers and switches and it has multiple data ranges that the users can program independently on each channel. This output module can also detect lead breakages and it has alarms for overrange and underrange current situations.

The Allen-Bradley 1794-OF8IH output module can be installed on a terminal base with. It locks to the terminal base when the keyswitch is rotated into position 4. This module supports pass-through messages with 1 or 2 pass-through connections supporting 8 queues per connection. Pass-through messages make it possible for the module to send HART messages to HART devices. Its data conversion rate is 10 milliseconds. The Allen-Bradley 1794-OF8IH module can operate in a temperature range of 32 to 131 degrees Fahrenheit.

This modules comes with Eight (8) analog output channels that are configurable for Current output such as 0-20 mA and 4-20 mA output signals. It has a resolution of 16 bits in unipolar format with actual resolution of 0.305 ?A/cnt. It uses an internal conversion rate of 10 ms with conversion rate of 16-bits digital to analog converter. The module channel’s settling time is 70 ms.

This module does not require an external power supply to be operated. It receives power from the FlexBus current with rated value of 80 mA @ 5V DC. This module has a maximum power dissipation of 5.0 W @ 24V DC and maximum Thermal dissipation 17.06 BTU/hr @ 24V DC.

This Flex I/O module is compatible for installation in 1794-TB3, 1794-TB3S terminal bases. It is factory calibrated and requires keyswitch position 4 when installing to the appropriate terminal base. Additionally, the wire type for use with this module depends on the type of the terminal base used by the 1794-OF8IH module.

This module has a dedicated register for HART data. This register is a 6 WORD register that contains the Fields Device, HART Communication, Loop Status, and primary value in IEEE 754-1985 Single-Precision 32-bit floating point.

FAQ for 1794-OF8IH

How many output channels does the 1794-OF8IH have?


The 1794-OF8IH has Eight (8) analog output channels.

What are the supported output signal types of this output module?


The 1794-OF8IH supports 0-20 mA and 4-20 mA output signals.

What is the resolution of the 1794-OF8IH?


The 1794-OF8IH has 16-bit resolution.

Technical Description of 1794-OF8IH

The Allen-Bradley 1794-OF8IH module is made by Allen-Bradley/Rockwell Automation as a FLEX I/O module. The Allen-Bradley 1794-OF8IH module can be used without jumpers and switches and it has multiple data ranges that the users can program independently on each channel.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1794-OF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 1794-OF8IH. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF
Reviews

Reviews for 1794-OF8IH

Internal Review

"The 1794-OF8IH is an analog output module that is capable of providing 0-20 mA and 4-20 mA signals. This module has special capability as it supports Highway Addressable remote Transducer (HART) protocol, compared to standard analog output modules. With the HART protocol, this module acts as multiplexers, routing signals to the controller and the connected HART device. Additionally, it can receive configuration and command through the HART communication that is connected by the same protocol. " -DO Supply Tech